Is this BB iso?
08-08-11 | 03:25 PM
#1
Thread Starter
Senior Member
Joined: Mar 2010
Posts: 6,970
Likes: 59
From: Catskills/Brooklyn, NY
Bikes: See sig
Is this BB iso?
I'm looking to order an Italian BB with a 113 spindle length. I found this, but it doesn't specify JIS or ISO. Anyone know?
https://www.sheldonbrown.com/harris/b...s.html#italian
(It's the Shimano BB-UN54 square tapered Italian 70mm width 36mm x 24 TPI for $24.95)
Thanks guys.
https://www.sheldonbrown.com/harris/b...s.html#italian
(It's the Shimano BB-UN54 square tapered Italian 70mm width 36mm x 24 TPI for $24.95)
Thanks guys.
08-08-11 | 03:35 PM
#3
Thread Starter
Senior Member
Joined: Mar 2010
Posts: 6,970
Likes: 59
From: Catskills/Brooklyn, NY
Bikes: See sig
08-08-11 | 03:41 PM
#4
PanGalacticGargleBlaster
Joined: Apr 2009
Posts: 7,531
Likes: 9
From: Smugglers Notch, Vermont
Bikes: Upright and Recumbent....too many to list, mostly Vintage.
Look again, the two above it are ISO/English Threading
If you look at the description for the other two it mentions the Spindle Taper is JIS.
If you look at the description for the other two it mentions the Spindle Taper is JIS.
__________________
--Don't Panic.
--Don't Panic.
08-08-11 | 03:44 PM
#5
Thread Starter
Senior Member
Joined: Mar 2010
Posts: 6,970
Likes: 59
From: Catskills/Brooklyn, NY
Bikes: See sig
08-08-11 | 03:44 PM
#6
Bianchi Goddess
Joined: Apr 2009
Posts: 28,885
Likes: 4,123
From: Shady Pines Retirement Fort Wayne, In
Bikes: Too many to list here check my signature.
the IRD BBs like this one
New! IRD Quad QB-55 68mm Bottom Bracket Sets $29.95
<H3></H3>
are the only ones I see close the UN54 with ISO mentioned but are they really talking about the taper? I would check IRDs website.
I would be suprised it shimano ever made ISO BBs since they would have intended for their BBs to used on their own cranks.
New! IRD Quad QB-55 68mm Bottom Bracket Sets $29.95
<H3></H3>Made in Japan by Tange
CroMoly J.I.S. square taper hollow spindle
BB Shell Width: 68 mm
Available spindle lengths: 107, 110, 113, 115, 118, 122.5 & 127.5mm
Steel Cups
BB Thread Type: ISO/English
With two steel cups, this is an excellent upgrade to the Shimano BB-UN54. CroMoly J.I.S. square taper hollow spindle
BB Shell Width: 68 mm
Available spindle lengths: 107, 110, 113, 115, 118, 122.5 & 127.5mm
Steel Cups
BB Thread Type: ISO/English
are the only ones I see close the UN54 with ISO mentioned but are they really talking about the taper? I would check IRDs website.
I would be suprised it shimano ever made ISO BBs since they would have intended for their BBs to used on their own cranks.
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
08-08-11 | 03:52 PM
#8
Thread Starter
Senior Member
Joined: Mar 2010
Posts: 6,970
Likes: 59
From: Catskills/Brooklyn, NY
Bikes: See sig
There's this, but the spindle is a little long. The recommended size for my crank is 113. Is it a huge thing to go to 115?
https://www.niagaracycle.com/product_...ucts_id=402420
https://www.niagaracycle.com/product_...ucts_id=402420
08-08-11 | 04:37 PM
#9
Bianchi Goddess
Joined: Apr 2009
Posts: 28,885
Likes: 4,123
From: Shady Pines Retirement Fort Wayne, In
Bikes: Too many to list here check my signature.
115 V 113 is only a difference of 1mm on each side. I just bought a Miche for a Stronglight I sould not find a ISO BB for. haven't installed it but it looks nice.
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
08-08-11 | 04:40 PM
#10
Thread Starter
Senior Member
Joined: Mar 2010
Posts: 6,970
Likes: 59
From: Catskills/Brooklyn, NY
Bikes: See sig
Maybe I'll try it. I sure as hell can't seem to find much else.
There's also this Campy one... https://www.niagaracycle.com/product_...ucts_id=402533
Does the fact that the Miche BB is listed as a track model make any real difference?
There's also this Campy one... https://www.niagaracycle.com/product_...ucts_id=402533
Does the fact that the Miche BB is listed as a track model make any real difference?
08-08-11 | 06:46 PM
#12
Cat 6
Joined: Dec 2007
Posts: 7,522
Likes: 236
From: Mountain Brook, AL
Just an FYI, now that it's too late - Miche makes ISO BBs, especially Italian
__________________
72 Frejus (for sale), Holdsworth Record (for sale), special CNC & Gitane Interclub / 74 Italvega NR (for sale) / c80 French / 82 Raleigh Intl MkII f&f (for sale)/ 83 Trek 620 (for sale)/ 84 Bruce Gordon Chinook (for sale)/ 85 Ron Cooper / 87 Centurion IM MV (for sale) / 03 Casati Dardo / 08 BF IRO / 09 Dogma FPX / 09 Giant TCX0 / 10 Vassago Fisticuff
72 Frejus (for sale), Holdsworth Record (for sale), special CNC & Gitane Interclub / 74 Italvega NR (for sale) / c80 French / 82 Raleigh Intl MkII f&f (for sale)/ 83 Trek 620 (for sale)/ 84 Bruce Gordon Chinook (for sale)/ 85 Ron Cooper / 87 Centurion IM MV (for sale) / 03 Casati Dardo / 08 BF IRO / 09 Dogma FPX / 09 Giant TCX0 / 10 Vassago Fisticuff
08-08-11 | 08:36 PM
#13
Thread Starter
Senior Member
Joined: Mar 2010
Posts: 6,970
Likes: 59
From: Catskills/Brooklyn, NY
Bikes: See sig
Thread
Thread Starter
Forum
Replies
Last Post
squirtdad
Classic & Vintage
4
09-09-12 01:28 PM
word_nerd
Bicycle Mechanics
3
07-15-11 07:33 PM
