Cinelli Stem Frustration...
02-24-12 | 07:05 PM
#1
Thread Starter
Senior Member
Joined: Dec 2011
Posts: 415
Likes: 0
From: Toronto, Ontario, CANADA
Bikes: Vitus 992 x2, Miele, Cambio Rino, Rossin, Pinarello, CIOCC, Cannondale, Devinci
Cinelli Stem Frustration...
Ok... Sooo my bike has a Cinelli 1E stem and a Cinelli 64-42 drop bar combo. Works perfectly... Bolts in the stem are rusty so I was going to swap it for an XA stem
The XA stem is 26.0mm and that appears to be what the drop bar measures out to be... But I can't get the friggin bar into the stem... What am I doing wrong here??
Heres some pics:
.
.
The XA stem is 26.0mm and that appears to be what the drop bar measures out to be... But I can't get the friggin bar into the stem... What am I doing wrong here??
Heres some pics:
.
.
02-24-12 | 07:09 PM
#2
Senior Member
Joined: Dec 2009
Posts: 1,681
Likes: 1
From: St. Louis, MO
Is the Cinelli bar double grooved? Most of the 26.0 bars have a warning note on them...also, the 26.0 are all grooved I believe.
Bottom line...Cinelli produced XAs in both 26.4 and 26.0, same for 64s.
Bottom line...Cinelli produced XAs in both 26.4 and 26.0, same for 64s.
02-24-12 | 07:19 PM
#3
Thread Starter
Senior Member
Joined: Dec 2011
Posts: 415
Likes: 0
From: Toronto, Ontario, CANADA
Bikes: Vitus 992 x2, Miele, Cambio Rino, Rossin, Pinarello, CIOCC, Cannondale, Devinci
.
02-24-12 | 07:30 PM
#4
The bar is most likely 26.4.
02-24-12 | 07:31 PM
#5
Senior Member
Joined: Aug 2009
Posts: 7,717
Likes: 4,120
From: Berkeley, CA
Bikes: 72 Cilo Pacer, 72 Gitane GT, 72 Peugeot PX10, 73 Speedwell Ti,l, 75 Peugeot PR-10L, 80 Colnago Super, 81 Zinn, 85 ALAN Cross, 85 De Rosa Pro, 86 Look 753, 86 Look KG86, 89 Parkpre Team, 90 Parkpre Team MTB, 90 Merlin
He meant, is the bar double-grooved (indents for cables).
Most Cinelli bars and stems are 26.4. It sure sounds as if you are trying to fit a standard 26.4 Cinelli bar into the (less common) 26.0 Cinelli stem.
Most Cinelli bars and stems are 26.4. It sure sounds as if you are trying to fit a standard 26.4 Cinelli bar into the (less common) 26.0 Cinelli stem.
__________________
-Randy
'72 Cilo Pacer (x2) • '72 Peugeot PX10 • ‘72 Gitane Gran Tourisme • '73 Speedwell Ti • '74 Motobecane Grand Jubile • '74 Peugeot UE-8 • ‘80 Colnago Super • ‘81 Univega Super Special • ‘82 Zinn • ‘84ish Mystery Custom • '85 A.L.A.N Cyclocross • '85 De Rosa Pro • '86 Look Equipe 753 • '86 Look KG86 • '89 Parkpre Team Road • '90 Parkpre Team MTB • '90 Merlin Ti
Avatar photo courtesy of jeffveloart.com, contact: contact: jeffnil8 (at) gmail.com.
-Randy
'72 Cilo Pacer (x2) • '72 Peugeot PX10 • ‘72 Gitane Gran Tourisme • '73 Speedwell Ti • '74 Motobecane Grand Jubile • '74 Peugeot UE-8 • ‘80 Colnago Super • ‘81 Univega Super Special • ‘82 Zinn • ‘84ish Mystery Custom • '85 A.L.A.N Cyclocross • '85 De Rosa Pro • '86 Look Equipe 753 • '86 Look KG86 • '89 Parkpre Team Road • '90 Parkpre Team MTB • '90 Merlin Ti
Avatar photo courtesy of jeffveloart.com, contact: contact: jeffnil8 (at) gmail.com.
02-24-12 | 07:35 PM
#6
Thread Starter
Senior Member
Joined: Dec 2011
Posts: 415
Likes: 0
From: Toronto, Ontario, CANADA
Bikes: Vitus 992 x2, Miele, Cambio Rino, Rossin, Pinarello, CIOCC, Cannondale, Devinci
Ah, no, not double grooved... It is drilled to run internal cabels though... Is the 1E stem 26 or 26.4?
02-24-12 | 07:45 PM
#7
Senior Member
Joined: Aug 2009
Posts: 7,717
Likes: 4,120
From: Berkeley, CA
Bikes: 72 Cilo Pacer, 72 Gitane GT, 72 Peugeot PX10, 73 Speedwell Ti,l, 75 Peugeot PR-10L, 80 Colnago Super, 81 Zinn, 85 ALAN Cross, 85 De Rosa Pro, 86 Look 753, 86 Look KG86, 89 Parkpre Team, 90 Parkpre Team MTB, 90 Merlin
^ Since you say the bars fit the 1E stem (but not the 26.0mm XA stem), then the 1E stem must be 26.4.
P.s. The 64-42 indicates the drop and width of the bars, and has no relation to the bar diameter/stem compatibility.
P.s. The 64-42 indicates the drop and width of the bars, and has no relation to the bar diameter/stem compatibility.
__________________
-Randy
'72 Cilo Pacer (x2) • '72 Peugeot PX10 • ‘72 Gitane Gran Tourisme • '73 Speedwell Ti • '74 Motobecane Grand Jubile • '74 Peugeot UE-8 • ‘80 Colnago Super • ‘81 Univega Super Special • ‘82 Zinn • ‘84ish Mystery Custom • '85 A.L.A.N Cyclocross • '85 De Rosa Pro • '86 Look Equipe 753 • '86 Look KG86 • '89 Parkpre Team Road • '90 Parkpre Team MTB • '90 Merlin Ti
Avatar photo courtesy of jeffveloart.com, contact: contact: jeffnil8 (at) gmail.com.
-Randy
'72 Cilo Pacer (x2) • '72 Peugeot PX10 • ‘72 Gitane Gran Tourisme • '73 Speedwell Ti • '74 Motobecane Grand Jubile • '74 Peugeot UE-8 • ‘80 Colnago Super • ‘81 Univega Super Special • ‘82 Zinn • ‘84ish Mystery Custom • '85 A.L.A.N Cyclocross • '85 De Rosa Pro • '86 Look Equipe 753 • '86 Look KG86 • '89 Parkpre Team Road • '90 Parkpre Team MTB • '90 Merlin Ti
Avatar photo courtesy of jeffveloart.com, contact: contact: jeffnil8 (at) gmail.com.
02-24-12 | 07:46 PM
#8
It's a 1A (not 1E). They were made in 26.4 and 26.0, but the vast majority are 26.4.
02-24-12 | 07:49 PM
#9
Thread Starter
Senior Member
Joined: Dec 2011
Posts: 415
Likes: 0
From: Toronto, Ontario, CANADA
Bikes: Vitus 992 x2, Miele, Cambio Rino, Rossin, Pinarello, CIOCC, Cannondale, Devinci
02-24-12 | 08:13 PM
#11
Thread Starter
Senior Member
Joined: Dec 2011
Posts: 415
Likes: 0
From: Toronto, Ontario, CANADA
Bikes: Vitus 992 x2, Miele, Cambio Rino, Rossin, Pinarello, CIOCC, Cannondale, Devinci
02-24-12 | 10:23 PM
#12
Thread Starter
Senior Member
Joined: Dec 2011
Posts: 415
Likes: 0
From: Toronto, Ontario, CANADA
Bikes: Vitus 992 x2, Miele, Cambio Rino, Rossin, Pinarello, CIOCC, Cannondale, Devinci
Done!!
Thanks for the help! Just finished... Cables would have been easier without the interrupter levers and bar end shifters but it will be a nice ride =)
This is my "backup" rider... Miele Doral Road Issue with full shimano 600
Yea.. I know... I need more practice with bar tape =)
.
.
.
.
.
.
.
.
.
.
This is my "backup" rider... Miele Doral Road Issue with full shimano 600
Yea.. I know... I need more practice with bar tape =)
.
.
.
.
.
.
.
.
.
.
02-24-12 | 11:04 PM
#14
Thread Starter
Senior Member
Joined: Dec 2011
Posts: 415
Likes: 0
From: Toronto, Ontario, CANADA
Bikes: Vitus 992 x2, Miele, Cambio Rino, Rossin, Pinarello, CIOCC, Cannondale, Devinci
02-24-12 | 11:11 PM
#16
Thread Starter
Senior Member
Joined: Dec 2011
Posts: 415
Likes: 0
From: Toronto, Ontario, CANADA
Bikes: Vitus 992 x2, Miele, Cambio Rino, Rossin, Pinarello, CIOCC, Cannondale, Devinci
02-24-12 | 11:35 PM
#18
Thread Starter
Senior Member
Joined: Dec 2011
Posts: 415
Likes: 0
From: Toronto, Ontario, CANADA
Bikes: Vitus 992 x2, Miele, Cambio Rino, Rossin, Pinarello, CIOCC, Cannondale, Devinci
Thanks! Yea... It all started when I put the Dura Ace seatpost in... Then Dura Ace Bar Ens shifters... Then one thing lead to another and it was full 600...
The frame is quite basic cr-mo Tange... Nothing special... I just really liked the factory pearl white paint
The frame is quite basic cr-mo Tange... Nothing special... I just really liked the factory pearl white paint
02-25-12 | 06:35 AM
#20
Thread Starter
Senior Member
Joined: Dec 2011
Posts: 415
Likes: 0
From: Toronto, Ontario, CANADA
Bikes: Vitus 992 x2, Miele, Cambio Rino, Rossin, Pinarello, CIOCC, Cannondale, Devinci
Thread
Thread Starter
Forum
Replies
Last Post
obuckler
Classic & Vintage
5
06-30-19 05:07 PM
