Worksman Industrial Bicycle- Report
#26
Junior Member
Join Date: Jul 2007
Location: Alameda, CA
Posts: 18
Bikes: 2008 Worksman INB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Go with the 20 inch frame...
...not as cool looking as the 17" but it is still well built.
I'd provide a review of my Worksman experience but, I am waiting to hear back from them on a frame I paid for but never received.
Customer service leaves much to be desired as does the fit and finish. American made, yes, but not as well made as it could be -- serious lack of attention to detail.
It is a strong bike provided you reinforce the post with square steel tubing and epoxy. I have a posting on that somewhere.
I'd provide a review of my Worksman experience but, I am waiting to hear back from them on a frame I paid for but never received.
Customer service leaves much to be desired as does the fit and finish. American made, yes, but not as well made as it could be -- serious lack of attention to detail.
It is a strong bike provided you reinforce the post with square steel tubing and epoxy. I have a posting on that somewhere.
#27
Uber Goober
Thread Starter
"Can you get these in a large frame?"
You have the straight frame or the curved frame. I expect the layout of the components is about the same either way, but the straight frame gives a bigger frame measurement. Anyway, you'll run out of knee room before you run out of seat extension. Last time I measured, I was 6'-1 1/2", and I wouldn't recommend it for anyone taller (or with longer legs)
BTW- took the crank bearings out, regreased them, still have the noise. It might be a pedal, might be the sprocket shifting on the crank, might be the bearings. It doesn't do it if you pedal with no load (so you can't listen to it while you turn it by hand), and doesn't do it if you go too slow.
You have the straight frame or the curved frame. I expect the layout of the components is about the same either way, but the straight frame gives a bigger frame measurement. Anyway, you'll run out of knee room before you run out of seat extension. Last time I measured, I was 6'-1 1/2", and I wouldn't recommend it for anyone taller (or with longer legs)
BTW- took the crank bearings out, regreased them, still have the noise. It might be a pedal, might be the sprocket shifting on the crank, might be the bearings. It doesn't do it if you pedal with no load (so you can't listen to it while you turn it by hand), and doesn't do it if you go too slow.
#28
Uber Goober
Thread Starter
I think I found my cricket noise- the right pedal. I oiled and noise seems to be gone now.
I finally got around to counting teeth- 44 on the front, 22 on the rear.
I finally got around to counting teeth- 44 on the front, 22 on the rear.
#29
Junior Member
Join Date: Feb 2006
Posts: 17
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
You can get the Jr. 12" Highrise bars for 2 bucks extra. Also, if the seatpost isn't long enough, a longer one from the bike shop. I have one on order for my wife 20" frame, high handlebars, 3 speed with the optional smaller front sprocket. I'll post back when she gets it. She is tall too. Somewhere around 5'11" She wanted a basic cruiser type bike with coaster brakes and not all the other gearing, lower handlebar position, narrow seat, etc., that goes with a mountain bike.
#30
Uber Goober
Thread Starter
Just an update. Still riding the bike. I took it on the Turkey Roll ride last fall and did the 32 mile route. Took it on the Happy New Rear route on New Years Day and did the 28 mile route there. I find going up a reasonable hill, it's great, and I can actually pass a number of people (can't downshift, so you either increase power output or walk!). Too many hills or miles and it would be handy to downshift, though. On the New Years ride, I did several miles back into a pretty stiff wind at about 11 mph. I've been riding quite a bit on weekends at White Rock Lake and trying to irmprove my average time there. Best so far is 15.7 mph over about 22.5 miles, and that's a pretty good little workout. I've actually gotten up to 19 mph while passing people out there. I've discovered fenders can be really really handy at certain times. I have dreams of doing the HHH but that's a ways off yet. And will probably try some other rides in between. The bike is unusual enough at these events to garner a few favorable comments. It's sort of like driving a Model T- most people wouldn't want to drive one, but they think it's cool if you do.
I didn't realize it but the double-bar frame is a very old design, commonly used on old Raleighs and dutch bikes, although the double bars were often put closer together.
I didn't realize it but the double-bar frame is a very old design, commonly used on old Raleighs and dutch bikes, although the double bars were often put closer together.
__________________
"be careful this rando stuff is addictive and dan's the 'pusher'."
"be careful this rando stuff is addictive and dan's the 'pusher'."
#31
Destroyer of Wheels
Whoa - 15.7 is a great average!
__________________
The Almighty Clyde FAQ || Northeast Index
eTrex Vista References || Road Reference
It's the year of the enema!
The Almighty Clyde FAQ || Northeast Index
eTrex Vista References || Road Reference
It's the year of the enema!
#32
Uber Goober
Thread Starter
For those not familiar with it, the White Rock Creek/ Lake trail is just almost flat- a couple of rises that don't slow you down much- so I can do it faster than the charity rides, which tend to have actual Hills. So I'll pass some people, and have other guys go zipping past me on occasion, too.
And on the charity rides, I'll be trying the ones with the least hills, not just random ones.
And on the charity rides, I'll be trying the ones with the least hills, not just random ones.
__________________
"be careful this rando stuff is addictive and dan's the 'pusher'."
"be careful this rando stuff is addictive and dan's the 'pusher'."
#33
Senior Member
Join Date: Sep 2007
Location: Used to be there, now I'm here.
Posts: 1,885
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
My girlfriend has one of Worksman's Tri-fecta folding trikes, she'd been riding it for a few years now with no problems whatsoever.
When we got it I had to install the seat, seatpost, stem, bars, and front wheel and the only "modifications" I had to make to assemble it were removing a bit of errant paint on the sliding bolt that locks the frame together at the fold, adjusting the chain tension, and tightening a loose screw on the chainguard.
Now she's talking about replacing the wire basket with a custom woven willow one from David Hembrow and getting a set of Woody's wooden fenders and chainguard for it.
She's going for a sort of retro look I guess.
When we got it I had to install the seat, seatpost, stem, bars, and front wheel and the only "modifications" I had to make to assemble it were removing a bit of errant paint on the sliding bolt that locks the frame together at the fold, adjusting the chain tension, and tightening a loose screw on the chainguard.
Now she's talking about replacing the wire basket with a custom woven willow one from David Hembrow and getting a set of Woody's wooden fenders and chainguard for it.
She's going for a sort of retro look I guess.
#34
Senior Member
Join Date: Sep 2006
Location: Paradise, TX
Posts: 2,087
Bikes: Soma Pescadero, Surly Pugsley, Salsa Fargo, Schwinn Klunker, Gravity SS 27.5, Monocog 29er
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 186 Post(s)
Liked 234 Times
in
166 Posts
For those not familiar with it, the White Rock Creek/ Lake trail is just almost flat- a couple of rises that don't slow you down much- so I can do it faster than the charity rides, which tend to have actual Hills. So I'll pass some people, and have other guys go zipping past me on occasion, too.
And on the charity rides, I'll be trying the ones with the least hills, not just random ones.
Everyone knows there aren't any hills in Texas
And on the charity rides, I'll be trying the ones with the least hills, not just random ones.
Everyone knows there aren't any hills in Texas
#35
Uber Goober
Thread Starter
Well, an update to this old thread.
My Worksman bike is now going into semi-retirement. I just recently got a new Raleigh Sojourn to use for longer rides. I've bought a Wald giant delivery basket for the front of the Worksman and the largest rear baskets, and have them installed. I have converted my heavy cruiser into a battleship. It'll get ridden to the grocery store now and again, and stuff like that, but the Sojourn is becoming the #1 bike now.
I've got about 7,700 miles on my Worksman. I've ridden it on the Hotter-n-Hell 100 twice, rode it 131 miles on a 211k brevet with Lone Star Randonneurs, rode a 107 mile permanent, and did a unsupported century down in south Texas, so a total of 5 century + rides on it. I rode it on the Beauty and the Beast charity ride in Tyler and the Goatneck ride in Cleburne, both of which are hillier rides. On the B&B, that about killed me, and I think I was the last one in off that course (but still got in before the course officially closed, on a 100k course). The Goatneck ride didn't seem that hard. I've also tried a couple of 200k brevets/permanents this summer that I didn't complete, due to heat/fitness/bike issues, hard to sort out one cause. Anyway, the Sojourn is partly an answer to those rides.
Riding the Sojourn instead of the Worksman adds about 2.5-3 mph to my average speed, going from 13.3 or so to 15.5 or 16 or so. That's not a vast difference, but that would mean finishing a century an hour sooner.
My Worksman bike is now going into semi-retirement. I just recently got a new Raleigh Sojourn to use for longer rides. I've bought a Wald giant delivery basket for the front of the Worksman and the largest rear baskets, and have them installed. I have converted my heavy cruiser into a battleship. It'll get ridden to the grocery store now and again, and stuff like that, but the Sojourn is becoming the #1 bike now.
I've got about 7,700 miles on my Worksman. I've ridden it on the Hotter-n-Hell 100 twice, rode it 131 miles on a 211k brevet with Lone Star Randonneurs, rode a 107 mile permanent, and did a unsupported century down in south Texas, so a total of 5 century + rides on it. I rode it on the Beauty and the Beast charity ride in Tyler and the Goatneck ride in Cleburne, both of which are hillier rides. On the B&B, that about killed me, and I think I was the last one in off that course (but still got in before the course officially closed, on a 100k course). The Goatneck ride didn't seem that hard. I've also tried a couple of 200k brevets/permanents this summer that I didn't complete, due to heat/fitness/bike issues, hard to sort out one cause. Anyway, the Sojourn is partly an answer to those rides.
Riding the Sojourn instead of the Worksman adds about 2.5-3 mph to my average speed, going from 13.3 or so to 15.5 or 16 or so. That's not a vast difference, but that would mean finishing a century an hour sooner.
__________________
"be careful this rando stuff is addictive and dan's the 'pusher'."
"be careful this rando stuff is addictive and dan's the 'pusher'."
#36
Junior Member
Join Date: Sep 2009
Location: South Ozone Park, New York
Posts: 9
Bikes: Worksman
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have a 36T Wald sprocket coming in the mail for my Worksman. It should be here tomorrow. Stoked!!!
#37
Senior Member
Join Date: Jun 2009
Location: Potashville
Posts: 1,079
Bikes: Reynolds 531P road bike, Rocky Mountain Metropolis, Rocky Mountain Sherpa 10, Look 566
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
My first bike ever (age 12) was like this. My father pinched, um, I mean brought home a men's delivery bike from the oil refinery where he worked. My older brother had it first, then I inherited the all-steel monstrosity when he got bored with it. Thinking back, I must have had the strongest quads of any 12 year old girl in the neighborhood, to have been riding that clunker all over the place. Seems to me I even won a few races with boys riding 3-speed banana seat bikes.
#39
Senior Member
Join Date: Aug 2006
Location: Valley Forge: Birthplace of Freedom
Posts: 1,301
Bikes: Novara Safari, CAAD9, WABI Classic, WABI Thunder
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 366 Post(s)
Liked 459 Times
in
240 Posts
Thought About a Worksman. Got one of these instead. Weighs 32 or so unloaded, 45 or so with bag and 8 speed Nexus. Have done a couple metric centuries but doubt I'd do a regular.
p.s. Nice job reviving a 3 year old thread, I read your original when looking at the Worksman.
__________________
Be watchful, stand firm in the faith, act like men, be strong. Let all that you do be done in love.
Be watchful, stand firm in the faith, act like men, be strong. Let all that you do be done in love.
#40
Senior Member
Join Date: Sep 2008
Posts: 5,206
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 140 Post(s)
Likes: 0
Liked 82 Times
in
65 Posts
On the New Years ride, I did several miles back into a pretty stiff wind at about 11 mph. I've been riding quite a bit on weekends at White Rock Lake and trying to irmprove my average time there. Best so far is 15.7 mph over about 22.5 miles, and that's a pretty good little workout. I've actually gotten up to 19 mph while passing people out there. .
#41
Senior Member
Join Date: Sep 2006
Location: Bakersfield, Host of the 2012 ToC ITT
Posts: 1,747
Bikes: Waterford 2200
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have one of these Worksman, it's called a low gravity bike. I use it to run to the store instead of my road bike, I love it.
__________________
Make mine a double!
Make mine a double!
#42
Downtown Spanky Brown
Join Date: May 2007
Location: Enola, Pennsyltucky
Posts: 2,108
Bikes: Motobecane Phantom Cross Pro Kona Lana'I
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#43
Rider
Join Date: Oct 2007
Location: Matanuska-Susitna Borough, AK
Posts: 1,077
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 5 Times
in
5 Posts
I remember i'd looked at these before; at that time they offered 7 speed hubs. They don't seem to anymore. Pity, as a wide range of gears has always been my number one need. Not so much a range of close gears like a road bike, but rather the fact that on my bike, I have an extended range of mtb gears and where I live I still manage to get a lot of use out of the extreme ends of the gearing spectrum.
The default Nokians sold in Anchorage are Extremes; those are 26x2.1 according to the side of the tire. If the standard tire maxes out at 2.125 then they would most likely work. If not, the Mount And Ground is x1.9 and works fine on my recumbent conversion, which has a much more restrictive tire size limit.
The default Nokians sold in Anchorage are Extremes; those are 26x2.1 according to the side of the tire. If the standard tire maxes out at 2.125 then they would most likely work. If not, the Mount And Ground is x1.9 and works fine on my recumbent conversion, which has a much more restrictive tire size limit.
#44
Newbie
Join Date: Nov 2010
Location: New Rochelle, NY
Posts: 2
Bikes: Montique, 4-Worksman, Burely Duet, Yahmaha Majesty
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I am offended by your comment and that my post was removed, what's the point of this .net if I can't be open and honest about a product in a thread about the product? No advertising was intended, or implied - what I wrote was an honest review of a bike company and my opinion of their product. I would appreciate an appology and having my post placed back on this thread.
#45
Humvee of bikes =Worksman
Join Date: May 2004
Posts: 5,362
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 7 Times
in
7 Posts
I just bought a Worksman Cruiser with a 7 sp hub so they do still offer them.
__________________
My preferred bicycle brand is.......WORKSMAN CYCLES
I dislike clipless pedals on any city bike since I feel they are unsafe.
Originally Posted by krazygluon
Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred, which one would you rather have under your butt at 30mph?
My preferred bicycle brand is.......WORKSMAN CYCLES
I dislike clipless pedals on any city bike since I feel they are unsafe.
Originally Posted by krazygluon
Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred, which one would you rather have under your butt at 30mph?
#46
Junior Member
Join Date: Nov 2010
Posts: 18
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I'm interested in these Dutchie bikes that they're coming out with. I may buy one of these if my efforts to obtain a Civia Loring at a decent price keep failing.
#47
Junior Member
Join Date: Jul 2007
Location: Alameda, CA
Posts: 18
Bikes: 2008 Worksman INB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
...not as cool looking as the 17" but it is still well built.
I'd provide a review of my Worksman experience but, I am waiting to hear back from them on a frame I paid for but never received.
Customer service leaves much to be desired as does the fit and finish. American made, yes, but not as well made as it could be -- serious lack of attention to detail.
It is a strong bike provided you reinforce the post with square steel tubing and epoxy. I have a posting on that somewhere.
I'd provide a review of my Worksman experience but, I am waiting to hear back from them on a frame I paid for but never received.
Customer service leaves much to be desired as does the fit and finish. American made, yes, but not as well made as it could be -- serious lack of attention to detail.
It is a strong bike provided you reinforce the post with square steel tubing and epoxy. I have a posting on that somewhere.
I got the frame and it still sits waiting for the build. Looking for a post-war Schwinn straight bar. I lost 140 lbs. so I am looking to go old skool! I bought the Worksman becuse I would have folded and old skool Schwinn.
I've had the INB for over 3 years now and I am pretty happy with it so far. Still, fit and finish could be better.
#48
Junior Member
Join Date: Dec 2005
Posts: 21
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have one of these. Black three speed like the model on the left. I replaced the bars with a more straight type. Easier to grip in my opinion. Otherwise, fun bike for NYC. Just did a 37 mile ride around town last weekend.
#49
Senior Member
Join Date: Jul 2007
Location: Kitchener, ON
Posts: 141
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Love worksman bikes. Had one of their trikes at my old job and it was a hoot. I've been debating getting a cruiser from them for a bit now.
But their website is a joke, and needs serious updating.
But their website is a joke, and needs serious updating.
#50
Humvee of bikes =Worksman
Join Date: May 2004
Posts: 5,362
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 7 Times
in
7 Posts
That said, are you going to buy a Worksman or just criticize their web site????
__________________
My preferred bicycle brand is.......WORKSMAN CYCLES
I dislike clipless pedals on any city bike since I feel they are unsafe.
Originally Posted by krazygluon
Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred, which one would you rather have under your butt at 30mph?
My preferred bicycle brand is.......WORKSMAN CYCLES
I dislike clipless pedals on any city bike since I feel they are unsafe.
Originally Posted by krazygluon
Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred, which one would you rather have under your butt at 30mph?