Question concerning fenders
06-21-11 | 10:15 AM
#1
Thread Starter
Newbie
Joined: Jun 2011
Posts: 4
Likes: 0
From: Minnesota
Bikes: Trek OCLV 5500 (Zephyrus), Vilano SS/Fixed (Lester), Hiawatha Gambler (Hiawatha), Fiore Oceanside (Sophie)
Question concerning fenders
I'm looking for some fenders for my bike and I would like some that are clip-on. I also need to find fenders that don't require the fender holes in the frame. Any suggestions?
06-21-11 | 10:33 AM
#2
Senior Member
Joined: Aug 2009
Posts: 696
Likes: 1
From: Louisville, CO
Bikes: Many
I put these Planet Bike Speedez on a bike that had similar problem to yours.
https://ecom1.planetbike.com/7017.html
No problems in the past 2 years, through Colorado weather.
I have to say it was a bargain (I expected the rubber to wear out after like 4 mos.)
I did ditch the screw-on connectors and use plastic tie-wraps to connect them to the triangle for the rear.
https://ecom1.planetbike.com/7017.html
No problems in the past 2 years, through Colorado weather.
I have to say it was a bargain (I expected the rubber to wear out after like 4 mos.)
I did ditch the screw-on connectors and use plastic tie-wraps to connect them to the triangle for the rear.
06-21-11 | 10:59 AM
#3
Member
Joined: May 2011
Posts: 45
Likes: 0
From: Ottawa, ON
https://bontrager.com/model/06536
They can be install on the same 'bracket housing' as your breaks. (sorry for the non-tecnical term) I have these fender on mine and it works great.
Cheers!
They can be install on the same 'bracket housing' as your breaks. (sorry for the non-tecnical term) I have these fender on mine and it works great.
Cheers!
Last edited by mttx; 06-21-11 at 11:05 AM.
