waterproof helmet covers
#1
Thread Starter
Senior Member
Joined: Feb 2006
Posts: 808
Likes: 16
From: Beaverton, OR
Bikes: It's the motor, not the bike, right?
waterproof helmet covers
I've always just ridden without one and let my head get wet in the rain (which it does plenty of here in the winter). For those who live in a similar or same climate as PNW, do you wear one?
If you had to pick between these two, which would you pick?

Louis Garneau https://www.nashbar.com/bikes/Product...0052_529400_-1
or

Nashbar house brand https://www.nashbar.com/bikes/Product...0052_172132_-1
If you had to pick between these two, which would you pick?

Louis Garneau https://www.nashbar.com/bikes/Product...0052_529400_-1
or

Nashbar house brand https://www.nashbar.com/bikes/Product...0052_172132_-1
#5
I don't think I'd choose either one. If it's raining and warm, these things will cause you to get hot and sweaty; better to just get a damp head. If it's cold, you're better off with a breathable thin wool or polypro cap beneath the helmet.
#6
Thread Starter
Senior Member
Joined: Feb 2006
Posts: 808
Likes: 16
From: Beaverton, OR
Bikes: It's the motor, not the bike, right?
I only plan on wearing when it is cool (50 and under) so that shouldn't be too much of a problem.
#7
Thread Starter
Senior Member
Joined: Feb 2006
Posts: 808
Likes: 16
From: Beaverton, OR
Bikes: It's the motor, not the bike, right?
I only plan on wearing when it is cool (50 and under) so that shouldn't be too much of a problem.
#8
Senior Member


Joined: Jul 2005
Posts: 6,916
Likes: 1,260
Dollar store shower caps (2 in the pack) for 99c cannot be beaten IMO for over the helmet rain protection. My helmet has a visor and the shower cap is just a little tight going over it. This leads to tears. Duct tape. I also have thin skullcaps designed to go under the helmet for warmth. They do not breathe and in the rain or not in the rain my head gets soaked. It is only bad if I take it off because the moisture cools quickly and it is not pleasant having to put a skullcap on wet after it has cooled below body temperature.
H
H
#10
Because I thought I could
Joined: Dec 2004
Posts: 969
Likes: 0
From: Wash DC Metro
Bikes: November, Trek OCLV, Bianchi Castro Valley commuter
I do the same; since I use a helmet-mounted light, I can't put anything over the helmet anyway.
#11
I like the topic, though I have more specific questions.
For those who own one and use one, would you recommend it? (Also in the PNW context)
For those who own one and use one, if you lost it would you replace it?
I may just bite the bullet and try it myself but if someone who uses one has an opinion and would share I would be grateful.
For those who own one and use one, would you recommend it? (Also in the PNW context)
For those who own one and use one, if you lost it would you replace it?
I may just bite the bullet and try it myself but if someone who uses one has an opinion and would share I would be grateful.
#12
Senior Member

Joined: Oct 2002
Posts: 2,727
Likes: 0
From: Medway, MA
Bikes: 2011 Lynskey Sportive, 1988 Cannondale SM400
I have the Louis Garneau cover. It works great and is small enough that it lives in my trunk, just in case. The trouble with NOT using a helmet cover is that the water drips in behind your glasses, making them useless. With the cover, I am able to see where I am going. If the rain is heavy, I can see under the visor and over my glasses.
#13
Thread Starter
Senior Member
Joined: Feb 2006
Posts: 808
Likes: 16
From: Beaverton, OR
Bikes: It's the motor, not the bike, right?
Packing tape is an ingenious idea.
demoncyclist- thanks for your reply. I would imagine I would wear it in those types of rain where it's really coming down. On my commute this morning the rain was just kind of a steady light rain so my head didn't even get that wet without one. But when we have our times of complete deluge, it might be nice.
demoncyclist- thanks for your reply. I would imagine I would wear it in those types of rain where it's really coming down. On my commute this morning the rain was just kind of a steady light rain so my head didn't even get that wet without one. But when we have our times of complete deluge, it might be nice.
#14
Senior Member

Joined: Oct 2009
Posts: 1,280
Likes: 322
From: Sherwood, OR
I use the J&G Cyclewear Waterproof Breathable Helmet Cover and really like it. I don't put it on until the rain really starts to fall, but I love it. I use a rain jacket with no hood, and the rain drains from the helmet cover over the collar and down the outside my jacket in the back - not inside the collar and inside my shirt.
The breathable fabric makes a big difference. I don't wear anything under it unless it is below freezing, and stay very comfortable. My head gets very hot, so this is a big deal for me. Th breathable fabric makes it nice for the "transition temperatures" - when it is too warm for a waterproof layer, but too cold for nothing. For me, this is between about 50°F and 30°F. Above 50, I just get wet.
If I lost it, I would replace it in a heartbeat. Especially where we live. Even if the waterproof breathable was not an option, I would still use a helmet cover. I'm not a fan of getting the "runoff" from the top of my head into my mouth during a steady rain.
The breathable fabric makes a big difference. I don't wear anything under it unless it is below freezing, and stay very comfortable. My head gets very hot, so this is a big deal for me. Th breathable fabric makes it nice for the "transition temperatures" - when it is too warm for a waterproof layer, but too cold for nothing. For me, this is between about 50°F and 30°F. Above 50, I just get wet.
If I lost it, I would replace it in a heartbeat. Especially where we live. Even if the waterproof breathable was not an option, I would still use a helmet cover. I'm not a fan of getting the "runoff" from the top of my head into my mouth during a steady rain.
#15
Senior Member

Joined: Oct 2009
Posts: 1,280
Likes: 322
From: Sherwood, OR
I just looked at the Garneau helmet cover and it looks like it is a breathable fabric. That's the one I would recommend between the two you are considering.
If you use a helmet with a visor, I would definitely look into the J&G. They come in a regular and a long. I have the long, and it easily fits over my visor. This is a big deal, especially if you wear glasses.
If you use a helmet with a visor, I would definitely look into the J&G. They come in a regular and a long. I have the long, and it easily fits over my visor. This is a big deal, especially if you wear glasses.
#16
Senior Member

Joined: Oct 2004
Posts: 3,077
Likes: 4
From: Cary, NC
Bikes: 1983 Trek 500, 2002 Lemond Zurich, 2023 Litespeed Watia
I use an older Sugio brand helmet cover similar to the second one. It's a little more subtle in appearance and it reduces the runoff effect and makes it easier to see when using glasses. I prefer to wear glasses for eye protection when cycling even in the rain.
#17
Senior Member
Joined: Dec 2010
Posts: 1,965
Likes: 6
From: Falls City, OR
Bikes: 2012 Salsa Fargo 2, Rocky Mountain Fusion, circa '93
All of those covers look like they would cover my Blackburn Flea light that I wear on my helmet, so I would stick with what I use now: a hood (from my O2 rain jacket) under the helmet. If it's much over 45 degrees I would be inclined to just let my hair get wet.
I like my helmet visor but I don't think any of them are long enough to keep rain off my glasses at 35 mph which I hit on the downhill side of my ridge. I wear contact lenses in the rain. My optical correction is about minus 11 diopters, so wet glasses mean I'm blind.
I like my helmet visor but I don't think any of them are long enough to keep rain off my glasses at 35 mph which I hit on the downhill side of my ridge. I wear contact lenses in the rain. My optical correction is about minus 11 diopters, so wet glasses mean I'm blind.
#18
Senior Member
Joined: Aug 2009
Posts: 5,720
Likes: 111
From: North of Boston
Bikes: Kona Dawg, Surly 1x1, Karate Monkey, Rockhopper, Crosscheck , Burley Runabout,
I use the J&G helmet cover and a head light. My minewt mini has straps the need the vent holes to fasten to. I just slide the helmet cover up a little on the sides to do this. Works great.
#21
Banned
Joined: Jun 2010
Posts: 43,586
Likes: 1,380
From: NW,Oregon Coast
Bikes: 8
I got one sent down here from MEC, thru a friend, as commecial export is a PIA.
it adds a brim, to keep your eyes under,
and a bit of a cape/flap on the back to keep the back of your neck dry
water resistant breathable coating ..
might get a Bern helmet, then I just have a couple holes to tape up ..
General problem no helmet light mount and rain cover work together.
it adds a brim, to keep your eyes under,
and a bit of a cape/flap on the back to keep the back of your neck dry
water resistant breathable coating ..
might get a Bern helmet, then I just have a couple holes to tape up ..
General problem no helmet light mount and rain cover work together.
#23
Senior Member
Joined: Jul 2011
Posts: 2,647
Likes: 6
From: Sudbury, ON, CA
Bikes: 2012 Kona Sutra, 2002 Look AL 384, 2018 Moose Fat bike
If you search Google images for images of bike helmet covers, you can find some interesting ideas.
#24
just ride

Joined: Nov 2007
Posts: 375
Likes: 0
From: Philadelphia
I have the one made by gore. I'm on the road by 5AM so that pretty much means jumping out of the shower and onto the bike with a wet head.
I use mine for warmth when the temperature is below 25 degrees - makes a huge difference. Would replace in a heartbeat if lost.
In the Pacific Northwest context - I don't use it for rain or if the temperatures are much above 25.
#25
experience over lungs
Joined: Mar 2008
Posts: 215
Likes: 0
From: SF Bay Area, CA
Bikes: Marin Cortina, Bianchi San Jose
I've used similar in the past, as well as hoods. My favorite solution continues to be a cycling cap under the helmet. There are many waterproof ones out there, but I have stuck to the standard cotton/poly blend caps which do get damp, but breathe well and protect my head a lot better than nothing at all.



