The dark nights are drawing in..........
#1
The dark nights are drawing in..........
With the depressing thought that its already getting dark earlier, a young man's thoughts turn to rear lighting. I need a rear light to fit the seatpost of my Dahon Mu. I need to remove it too. I am on lit roads and journeys are usually 40 mins. I have read the reviews but a lot of products dont actually fit. Even when the spec says they will.
Any recommendations for a sensibly priced rear light to fit my seatpost?
Any recommendations for a sensibly priced rear light to fit my seatpost?
#3
Senior Member
Joined: Dec 2008
Posts: 799
Likes: 2
From: Bay Area, California
Bikes: Pacific Reach, Strida
How about something like the Serfas Thunderbolt? I have two of them, and they are VERY bright. I'm not familiar with the dimensions of the Mu seatpost, so I don't know how well they would fit. The straps are stretchy, and they fit around the seatpost of my mountain bike, although I normally attach the lights to my rack or rear stays (depending on which bike I'm riding) instead.
#5
Senior Member
Joined: Sep 2012
Posts: 1,031
Likes: 6
From: NW Arkansas, USA
Bikes: 2015 Giant Roam 2 Hybrid
Damn it! You had to remind us?! 
I missed a few days this week due to nasty storms rolling through. I couldn't get over the fact how much longer the shadows are at the same time of day from just a few weeks ago.

I missed a few days this week due to nasty storms rolling through. I couldn't get over the fact how much longer the shadows are at the same time of day from just a few weeks ago.
#6
weirdo
Joined: Jan 2008
Posts: 1,962
Likes: 5
From: Reno, NV
#7
Senior Member


Joined: Jul 2008
Posts: 30,486
Likes: 4,563
From: 25 miles northwest of Boston
Bikes: Bottecchia Sprint, GT Timberline 29r, Marin Muirwoods 29er, Trek FX Alpha 7.0
in a pinch you can go rogue and fabricate your own mount
- buy perforated strapping
- cut to length with vise and hack saw
- wrap and bolt to PBSF mount
- adjust and tighten
- light clips in and out easily
- since I've lost PBSFs on bumps, I add the rubber band
#9
Banned
Joined: Jun 2010
Posts: 43,586
Likes: 1,380
From: NW,Oregon Coast
Bikes: 8
Have a Rain Cape I throw over myself in the wet weather , so I mounted the lights Low enough to not be covered ..
Hub Dynamo ... already done on the Bike Friday.. about to invest in a new Brompton wheel..
Hub Dynamo ... already done on the Bike Friday.. about to invest in a new Brompton wheel..
Last edited by fietsbob; 08-15-13 at 12:12 PM.
#10
For those who like closure, I bought a Smart Lunar R1. https://www.amazon.co.uk/s/ref=nb_sb_...rds=REAR+LIGHT It didn't fit the seat post despite the blurb suggesting it will. However, it also came with a bracket to fit it to the rear rack. I use Mini Ortliebs so can't fit the light there. Good news, it fits the seat rail (using a lot of the rubber matting it comes with) and is in a great position. It doesn't mess the fold and is easily seen. The light is small, flashy and bright. I still carry spare lights and usually hang one off my panniers, but its great to have the main tail light sorted.
So if you have an MU, a Smart Lunar R1 is an option.
So if you have an MU, a Smart Lunar R1 is an option.
#11
Banned.
Joined: Feb 2013
Posts: 1,662
Likes: 1
From: Brighton UK
Bikes: 20" Folder, Road Bike
That is debatable. You can get way with a well positioned
rear reflector and reflective pedals from the rear but a front
light IMO is mandatory to be seen coming.
rgds, sreten.
FWIW in the UK the 99p/£1 shop lights are surprisingly good.
#12
Galveston County Texas
Joined: Nov 2007
Posts: 33,335
Likes: 1,286
From: In The Wind
Bikes: 02 GTO, 2011 Magnum
#13
Agreed... especially since cyclists usually travel in a lane where traffic approaches us from behind. It's foolhardy to not use at least one good bright flashing light.
#14
The Recumbent Quant

Joined: Jan 2012
Posts: 3,094
Likes: 8
From: Fairfield, CT
Bikes: 2012 Cruzbike Sofrider, 2013 Cruzigami Mantis, 2016 Folding CruziTandem
I personally mount a Cygolite Hotshot to my helmet (it has a seatpost mount, but I've never used it). It's quite bright and USB chargeable (so it's easy to charge at work).
#15
Banned
Joined: Jun 2010
Posts: 43,586
Likes: 1,380
From: NW,Oregon Coast
Bikes: 8
Had the 1st Rain in months , and of course the 1st Rear end collision happened as drivers were braking late
which they could get away with on dry pavement ,
but wet, with a wee bit of Petroleum weeping out of the summer traffic , getting floated by the rain ,
and the stopping distance difference got longer..
which they could get away with on dry pavement ,
but wet, with a wee bit of Petroleum weeping out of the summer traffic , getting floated by the rain ,
and the stopping distance difference got longer..
#16
What if that one light fail, or fall off?? Just asking.
#17
Full Member

Joined: Apr 2012
Posts: 440
Likes: 1
From: Nottingham
Bikes: Mezzo I4, Trek 1200, Rudge (Montague) BiFrame, Bickerton
Agreed, I have one of the 5 led front lights that looks like a torch and its surprising how bright it is. Not suitable for unlit roads although there is enough light to see the edges of the road. They make a good "get you seen" light for town and city riding. Cheap enough to have several on the bike. The brackets break easily so I use a Velcro and rubber mount from Deal Extreme.
Thread
Thread Starter
Forum
Replies
Last Post
JohnnyCyclist
Advocacy & Safety
9
04-23-16 10:37 AM
Chris_W
Long Distance Competition/Ultracycling, Randonneuring and Endurance Cycling
11
02-24-15 06:04 AM





