Bike Forums
There is a slight rise in the center of the saddle that makes it a bit uncomfortable for me.
There is a slight rise in the center of the saddle that makes it a bit uncomfortable for me.
0 2024/08/13 13:45:56
The bars are nice and show very little use. Not sure if it shows but they are 64/40.
The bars are nice and show very little use. Not sure if it shows but they are 64/40.
0 2024/08/13 13:39:53
some Shimano arms that also fits he 130bcd.
some Shimano arms that also fits he 130bcd.
0 2024/08/12 18:17:26
Taller guy cranks set. 172.5, but fits your request.
Taller guy cranks set. 172.5, but fits your request.
0 2024/08/12 18:17:25
And I have always known this one as a second hand.
And I have always known this one as a second hand.
0 2024/08/10 16:33:43
For the last forty years I have called this tool a third hand.
For the last forty years I have called this tool a third hand.
0 2024/08/10 16:33:40
A 27.2 SR seat post.
A 27.2 SR seat post.
0 2024/08/10 11:32:51
0 2024/08/10 11:27:07
The other side of the bars marked Fiamme.
The other side of the bars marked Fiamme.
0 2024/08/10 11:27:05
A cool pair of bars that say made in Italy. Feels like 40/64 to me.
A cool pair of bars that say made in Italy. Feels like 40/64 to me.
0 2024/08/10 11:26:56
I think it is from a known parts supplier.
I think it is from a known parts supplier.
0 2024/08/10 11:26:54
A triple crank with sealed bb. A take off from a mountain bike. Also a weird FD for oversize tubing that clamps through the BB.
A triple crank with sealed bb. A take off from a mountain bike. Also a weird FD for oversize tubing that clamps through the BB.
0 2024/08/10 11:26:52
Either of these can be used to repair your caliper. but they should work jus fine.
Either of these can be used to repair your caliper. but they should work jus fine.
0 2024/08/09 17:55:41
0 2024/08/09 16:26:33
No real markings but does have a Minn line stamped in it. No Campy but fits a 27.0 seat diameter.
No real markings but does have a Minn line stamped in it. No Campy but fits a 27.0 seat diameter.
0 2024/08/09 15:27:13
A closer look at the hub.
A closer look at the hub.
0 2024/08/09 14:59:10
Closer look a the FW.
Closer look a the FW.
0 2024/08/09 14:59:10
The complete wheel innerds hub, spokes, and freewheel.
The complete wheel innerds hub, spokes, and freewheel.
0 2024/08/09 14:59:08
Not adjustable but will give more cable pull.
Not adjustable but will give more cable pull.
0 2024/08/09 14:45:04
Cable hanger that rides between the seat post ears.
Cable hanger that rides between the seat post ears.
0 2024/08/09 14:45:00
Almost all eyelets are having to be dug and cut out with an X-acto knife. Argh!
Almost all eyelets are having to be dug and cut out with an X-acto knife. Argh!
0 2024/08/08 16:58:18
I'm thinking it was Tubasti from a rookie doing the job.
I'm thinking it was Tubasti from a rookie doing the job.
0 2024/08/08 16:58:17
A 39 tooth inner ring, alloy.
A 39 tooth inner ring, alloy.
0 2024/08/08 14:33:36
Close as I can read is 122-123 bolt pattern.
Close as I can read is 122-123 bolt pattern.
0 2024/08/08 14:33:35
A handful of skewers various lengths and models.
A handful of skewers various lengths and models.
0 2024/08/08 14:33:29
Has all the looks of the real thing but the parts are all different sizes than they should be. Bolt sizes and lower plate are different.
Has all the looks of the real thing but the parts are all different sizes than they should be. Bolt sizes and lower plate are different.
0 2024/08/05 16:01:19
I'm gonna say the size is 27.0 although it was marked 26.6 on the bottom of the post.
I'm gonna say the size is 27.0 although it was marked 26.6 on the bottom of the post.
0 2024/08/05 16:01:19
The impostor with no markings as to origin. It is functional but just is a bit off from he real thing.
The impostor with no markings as to origin. It is functional but just is a bit off from he real thing.
0 2024/08/05 16:01:15
Rear hub spaced at 127mm and no ring markings for FW.
Rear hub spaced at 127mm and no ring markings for FW.
0 2024/08/04 13:01:15
Front hub spaced at 100 mm.
Front hub spaced at 100 mm.
0 2024/08/04 13:01:15
Both hubs, with straight QR arms, and cone shaped adjustors.
Both hubs, with straight QR arms, and cone shaped adjustors.
0 2024/08/04 13:01:13
Freehub models for parts or build up. 36 hole QR axles.
Freehub models for parts or build up. 36 hole QR axles.
0 2024/08/04 12:11:35
New Chaser Tech pulleys with brass spacers for correct chain clearance.
New Chaser Tech pulleys with brass spacers for correct chain clearance.
0 2024/08/01 14:22:08
Body is clean and no pitting in the Al. You can see the new rivet head for the rear body plate.
Body is clean and no pitting in the Al. You can see the new rivet head for the rear body plate.
0 2024/08/01 14:22:08
NR rear in probably an 8-9 condition.
NR rear in probably an 8-9 condition.
0 2024/08/01 14:22:05
A lot of small parts and few bigger items.
A lot of small parts and few bigger items.
0 2024/07/31 17:30:07
Attaching hardware for Huret/Simplex.
Attaching hardware for Huret/Simplex.
0 2024/07/30 08:35:15
Phil freewheel removal tool.
Phil freewheel removal tool.
0 2024/07/26 16:10:20
This hasn't failed me yet. Needs about 90 PSI to run but always spins the FW's off pretty fast.
This hasn't failed me yet. Needs about 90 PSI to run but always spins the FW's off pretty fast.
0 2024/07/21 16:09:54
But all of the pars are there to change you hub over to a newer size OLD and freehub body.
But all of the pars are there to change you hub over to a newer size OLD and freehub body.
0 2024/07/20 19:37:28
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences | Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.