Bike Forums
0 2024/10/22 19:25:12
0 2024/10/22 14:56:08
0 2024/10/22 14:56:05
0 2024/10/22 14:54:57
0 2024/10/22 14:54:54
I think the drop out will look just fine after the welding and repainting.
I think the drop out will look just fine after the welding and repainting.
0 2024/10/19 15:11:51
I probably got the tint a little too dark, but it is going to keep rust from forming, and will be blue as I speed past any observer. You know speeding horse concept.
I probably got the tint a little too dark, but it is going to keep rust from forming, and will be blue as I speed past any observer. You know speeding horse concept.
0 2024/10/19 15:11:49
A complete set of long Knuckle Savers in metric. this set is like the ones used daily for the last 25 years here in the shop.
A complete set of long Knuckle Savers in metric. this set is like the ones used daily for the last 25 years here in the shop.
0 2024/10/19 12:56:25
More orphan parts.
More orphan parts.
0 2024/10/18 15:34:24
Some Simplex Delryn parts.
Some Simplex Delryn parts.
0 2024/10/18 15:34:21
More parts, the brake set can be complete, but were removed in two different visits of the box.
More parts, the brake set can be complete, but were removed in two different visits of the box.
0 2024/10/18 15:34:17
All parts are on the display board and are in sequence. A few parts are potentially fixable but most are just ready for he scrapyard.
All parts are on the display board and are in sequence. A few parts are potentially fixable but most are just ready for he scrapyard.
0 2024/10/18 15:34:14
The box brimming with plenty of working parts and some new shop stickers. Ready to be sealed up waiting for players to sign up.
The box brimming with plenty of working parts and some new shop stickers. Ready to be sealed up waiting for players to sign up.
0 2024/10/18 15:24:07
Stickers before being repackaged as singles.
Stickers before being repackaged as singles.
0 2024/10/18 15:24:02
New frame stickers that are going into the box as it moves forward.
New frame stickers that are going into the box as it moves forward.
0 2024/10/16 17:40:46
The problem is how to get all the stuff back in the box.
The problem is how to get all the stuff back in the box.
0 2024/10/16 15:57:16
Cleaning up netted a truckload of junk.
Cleaning up netted a truckload of junk.
0 2024/10/14 16:17:05
Chrome dust cap is about the same patina as yours.
Chrome dust cap is about the same patina as yours.
0 2024/10/14 14:33:09
The mate as found in the trunk full of junk.
The mate as found in the trunk full of junk.
0 2024/10/14 14:33:06
non-drive side photo. No skewer!
non-drive side photo. No skewer!
0 2024/10/12 14:54:15
Five speed FW.
Five speed FW.
0 2024/10/12 14:54:07
FW side of hub.
FW side of hub.
0 2024/10/12 14:54:06
Non drive side.
Non drive side.
0 2024/10/12 14:42:34
Freewheel looks like Suntour five speed.
Freewheel looks like Suntour five speed.
0 2024/10/12 14:42:30
Hub and FW seems to have cleaned up nicely.
Hub and FW seems to have cleaned up nicely.
0 2024/10/12 14:42:29
The bad section of the rim, note the chatter marks.
The bad section of the rim, note the chatter marks.
0 2024/10/12 12:51:50
The hub looks to be what is being discussed here.
The hub looks to be what is being discussed here.
0 2024/10/12 12:51:44
The wheel and it looks like it took a pretty good ding about the 2 O'clock position
The wheel and it looks like it took a pretty good ding about the 2 O'clock position
0 2024/10/12 12:51:41
And a few new endorsements from a few contributors.
And a few new endorsements from a few contributors.
0 2024/10/11 16:00:19
Back to a nice square shape with plenty of dings and dents showing that the liner has indeed done it's job over the lifetime in use.
Back to a nice square shape with plenty of dings and dents showing that the liner has indeed done it's job over the lifetime in use.
0 2024/10/11 16:00:17
The left side damage to the Huffente was mitigated and now is back to normal. I did have to tighten a few loose screw holding the angle plates in place.
The left side damage to the Huffente was mitigated and now is back to normal. I did have to tighten a few loose screw holding the angle plates in place.
0 2024/10/11 16:00:14
Today's tool of choice is a Mac Tools ball peen hammer. It will be used exclusively for many blows to the aluminum liner.
Today's tool of choice is a Mac Tools ball peen hammer. It will be used exclusively for many blows to the aluminum liner.
0 2024/10/11 16:00:10
My two foot breaker bar bought in a pawn shop for $10.
My two foot breaker bar bought in a pawn shop for $10.
0 2024/10/01 15:21:51
The junk yard tool as made here in the race car shop. Parts were about $12 for black sockets, and used lug spindle and two use lug nuts from the race car. Maybe $20 total for parts.
The junk yard tool as made here in the race car shop. Parts were about $12 for black sockets, and used lug spindle and two use lug nuts from the race car. Maybe $20 total for parts.
0 2024/10/01 15:21:49
This is the item needed. I will look for a potential find for purchase.
This is the item needed. I will look for a potential find for purchase.
0 2024/10/01 08:30:43
And this one is definitely a seven.
And this one is definitely a seven.
0 2024/09/24 13:15:26
Same here best I can tell it is a seven.
Same here best I can tell it is a seven.
0 2024/09/24 13:15:23
This one kinda shows the wear marks from the cassette.
This one kinda shows the wear marks from the cassette.
0 2024/09/24 13:15:20
I tried to count the wear marks in the freehub from cassette wear. This one is on a Paralax hub.
I tried to count the wear marks in the freehub from cassette wear. This one is on a Paralax hub.
0 2024/09/24 13:15:18
And some new plastic with no holes in it that drains clearly and correctly.
And some new plastic with no holes in it that drains clearly and correctly.
0 2024/09/21 15:52:27
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences | Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.