Bike Forums
Standard A tubing for the model year.
Standard A tubing for the model year.
0 2024/11/16 15:47:13
Model is oversized tubing with correct seat post
Model is oversized tubing with correct seat post
0 2024/11/16 15:47:10
Seems to be an '80 or '90 model.
Seems to be an '80 or '90 model.
0 2024/11/16 15:47:08
During clean up and resetting HS and BB
During clean up and resetting HS and BB
0 2024/11/16 15:47:07
A small dent on the tube but won't affect ride.
A small dent on the tube but won't affect ride.
0 2024/11/16 15:37:35
Oversized tubes and has the correct seat post for the frame.
Oversized tubes and has the correct seat post for the frame.
0 2024/11/16 15:37:31
Trek 1200 looks like '89 or '90. Comes with Shimano drive components.
Trek 1200 looks like '89 or '90. Comes with Shimano drive components.
0 2024/11/16 15:37:29
During cleaning and resetting HS and BB.
During cleaning and resetting HS and BB.
0 2024/11/16 15:37:28
Frame has a small ding on one of the tubes but otherwise looks like it will build up nicely.
Frame has a small ding on one of the tubes but otherwise looks like it will build up nicely.
0 2024/11/16 13:30:38
Most all of the parts are sitting in a box on the side, and are getting cleaned up with most just in need of some TLC.
Most all of the parts are sitting in a box on the side, and are getting cleaned up with most just in need of some TLC.
0 2024/11/16 13:30:35
The paint is fair, but could stand some touch up in a few places.
The paint is fair, but could stand some touch up in a few places.
0 2024/11/16 13:30:32
it looks like about a 1990 Trek.
it looks like about a 1990 Trek.
0 2024/11/16 13:30:29
The Loto had some serious rust pitting on the lower side of the BB and got repainted so a good cleaning of the threads was in order before installing a bottom bracket.
The Loto had some serious rust pitting on the lower side of the BB and got repainted so a good cleaning of the threads was in order before installing a bottom bracket.
0 2024/11/15 17:00:54
The grey came off with just a bit of lacquer thinner in a rag. I am going to try to clean and revive the frame for a new life for a BF member.
The grey came off with just a bit of lacquer thinner in a rag. I am going to try to clean and revive the frame for a new life for a BF member.
0 2024/11/14 16:15:26
Both the stem and seat post came out with no problems. A few bits are damaged but the parts seem OK Sora looks to be the group.
Both the stem and seat post came out with no problems. A few bits are damaged but the parts seem OK Sora looks to be the group.
0 2024/11/14 16:15:20
0 2024/11/14 16:14:37
I put it in the stand wondering if there were any salvageable parts and most of the drive train and brakes are intact.
I put it in the stand wondering if there were any salvageable parts and most of the drive train and brakes are intact.
0 2024/11/14 16:14:32
This frame was part of a scrap load from my co-op. Bad rattle can over original paint, has all the looks of being stolen and dumped at the co-op.
This frame was part of a scrap load from my co-op. Bad rattle can over original paint, has all the looks of being stolen and dumped at the co-op.
0 2024/11/14 16:14:30
This grey bike was yellow once and shows the signs of theft. But the group and bars will be salvaged before going into the shredder.
This grey bike was yellow once and shows the signs of theft. But the group and bars will be salvaged before going into the shredder.
0 2024/11/12 16:52:34
Plenty of room to house the tool and spare dies inside the case.
Plenty of room to house the tool and spare dies inside the case.
0 2024/11/06 15:47:12
The pass around tool case! It needs branding to help with the BF cause.
The pass around tool case! It needs branding to help with the BF cause.
0 2024/11/06 15:47:10
A little dusty from hanging here in the shop but they are still rolling well.
A little dusty from hanging here in the shop but they are still rolling well.
0 2024/11/06 13:35:20
Front and rear from the Raleigh he used as a race bike
Front and rear from the Raleigh he used as a race bike
0 2024/11/06 13:35:17
Same thing on the top race.
Same thing on the top race.
0 2024/11/06 12:19:24
Some pitting on the surface but just surface issue.
Some pitting on the surface but just surface issue.
0 2024/11/06 12:19:22
It did not have a spacer, but you are going to adjust for the steerer which would be a few spacers.
It did not have a spacer, but you are going to adjust for the steerer which would be a few spacers.
0 2024/11/06 12:19:19
My VAR 13 spanner and new pins on top. Wayne's info under that with his phone number from my invoice. And then the two Italian dies for the Pass Around Tool.
My VAR 13 spanner and new pins on top. Wayne's info under that with his phone number from my invoice. And then the two Italian dies for the Pass Around Tool.
0 2024/11/04 15:20:43
My VAR model 13 pin spanner in need of a couple of new pins. The pins are in the upper two packets. Wayne's phone number is on the invoice just under my tool Because I am posting it so those wanting to get something can't find a web site currently, so call him. The bottom two parts are new dies for the Pass Around BB tool, which makes it change from English to Italian BB's.
My VAR model 13 pin spanner in need of a couple of new pins. The pins are in the upper two packets. Wayne's phone number is on the invoice just under my tool Because I am posting it so those wanting to get something can't find a web site currently, so call him. The bottom two parts are new dies for the Pass Around BB tool, which makes it change from English to Italian BB's.
0 2024/11/04 14:51:59
Inner side view with the newer lever.
Inner side view with the newer lever.
0 2024/11/03 08:50:50
Right side of the newer model exploded view.
Right side of the newer model exploded view.
0 2024/11/03 08:50:46
Inner side washers and example of blacked out older model shift lever.
Inner side washers and example of blacked out older model shift lever.
0 2024/11/03 08:50:43
Right side exploded outer washers on the older model.
Right side exploded outer washers on the older model.
0 2024/11/03 08:50:40
High E hubs but no skewers.
High E hubs but no skewers.
0 2024/10/31 16:21:56
Front and rear with Ergal and Mavic tubular rims.
Front and rear with Ergal and Mavic tubular rims.
0 2024/10/31 16:21:53
These came in as items in a parcel of Campy bits, and I won't use them.
These came in as items in a parcel of Campy bits, and I won't use them.
0 2024/10/30 15:23:07
Tippo axle assembly salvaged from a hub destroyed removing a freewheel that was on a hub with the spokes cut before FW removal.
Tippo axle assembly salvaged from a hub destroyed removing a freewheel that was on a hub with the spokes cut before FW removal.
0 2024/10/25 10:29:38
This one can wait for a while. A lot of projects to finish before snow hits.
This one can wait for a while. A lot of projects to finish before snow hits.
0 2024/10/24 14:16:37
looks like a weak wrap up spring.
looks like a weak wrap up spring.
0 2024/10/24 07:45:48
Broken adjuster screw.
Broken adjuster screw.
0 2024/10/24 07:45:46
0 2024/10/22 19:25:15
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences | Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.