Bike Forums
Cones got polished back to mirror finish.
Cones got polished back to mirror finish.
0 2024/12/31 09:54:00
Nice and clean and ready for reassembly.
Nice and clean and ready for reassembly.
0 2024/12/31 09:53:56
Everything gets a bath in solvent, and then some polishing.
Everything gets a bath in solvent, and then some polishing.
0 2024/12/31 09:53:51
Rear D's two Gt cages and one short cage.
Rear D's two Gt cages and one short cage.
0 2024/12/27 11:52:30
Front D's band on.
Front D's band on.
0 2024/12/27 11:52:27
Shift lever sets, one each style of lever stops.
Shift lever sets, one each style of lever stops.
0 2024/12/27 11:52:23
All cyclone except one Vx front.
All cyclone except one Vx front.
0 2024/12/27 11:52:20
Three spindles, 68 on the bottom 70's on the top. The original spindle from the complete BB on top with the bolts.
Three spindles, 68 on the bottom 70's on the top. The original spindle from the complete BB on top with the bolts.
0 2024/12/27 11:00:47
A quick drawing of how to create the forward lean Campy seat post in a Huffy sized seat tube.
A quick drawing of how to create the forward lean Campy seat post in a Huffy sized seat tube.
0 2024/12/25 07:54:17
a used 25.0 seat post top with the fluting intact. Perfect for a weld on a forward set seat post.
a used 25.0 seat post top with the fluting intact. Perfect for a weld on a forward set seat post.
0 2024/12/25 07:54:14
Second generation Ultimate portable bike stand. It even came with the tote bag. Durable and will hold most any bike.
Second generation Ultimate portable bike stand. It even came with the tote bag. Durable and will hold most any bike.
0 2024/12/19 14:05:14
My three way wrench that can use either hex bits or sockets. This one is 1/4" drive but A 3/8" drive can be fabricated. the same way.
My three way wrench that can use either hex bits or sockets. This one is 1/4" drive but A 3/8" drive can be fabricated. the same way.
0 2024/12/19 13:36:43
Get four of these. About two dollars each and weld together into a four way wrench.
Get four of these. About two dollars each and weld together into a four way wrench.
0 2024/12/19 13:36:40
Bottom bracket for Athena group but can be used elsewhere if it fits.
Bottom bracket for Athena group but can be used elsewhere if it fits.
0 2024/12/14 17:45:24
Not sure how it got into the stash, but it can be used by someone. Cable guides, and clamps for cables.
Not sure how it got into the stash, but it can be used by someone. Cable guides, and clamps for cables.
0 2024/12/14 17:45:22
misc. headset parts
misc. headset parts
0 2024/12/12 14:39:56
The paper is mounted with a piece of masking tape and the length of the paper determines the thickness of the reaming diameter.
The paper is mounted with a piece of masking tape and the length of the paper determines the thickness of the reaming diameter.
0 2024/12/03 10:00:24
The tool is a spool of wood mounted on an all thread rod, and used with a drill for creating a circular motion of the grit paper.
The tool is a spool of wood mounted on an all thread rod, and used with a drill for creating a circular motion of the grit paper.
0 2024/12/03 10:00:21
Both are reconditioned but are very serviceable for a daily rider.
Both are reconditioned but are very serviceable for a daily rider.
0 2024/12/02 13:54:46
Head set required a second spacer to get things correct. The new spacer is not quite the shiny chrome but works and will look just fine at 20mph.
Head set required a second spacer to get things correct. The new spacer is not quite the shiny chrome but works and will look just fine at 20mph.
0 2024/12/01 14:24:13
Shift levers required breaking into the stash for new washers.
Shift levers required breaking into the stash for new washers.
0 2024/12/01 14:24:04
Gear installed for the drive train with nice clearance.
Gear installed for the drive train with nice clearance.
0 2024/12/01 14:24:02
The right length for an Italian bottom bracket.
The right length for an Italian bottom bracket.
0 2024/11/29 15:05:44
The down tube shows the proper gloss but I wonder how it will hold up.
The down tube shows the proper gloss but I wonder how it will hold up.
0 2024/11/29 14:46:42
Another view. Note the change from gloss to opaque. And it is on the top tube.
Another view. Note the change from gloss to opaque. And it is on the top tube.
0 2024/11/29 14:46:39
This is the polyurethane note the small scratches from just being in the shop.
This is the polyurethane note the small scratches from just being in the shop.
0 2024/11/29 14:46:36
You can see the gloss of the clear coat over the decals.
You can see the gloss of the clear coat over the decals.
0 2024/11/29 13:08:56
A little of the detail that comes through with Greg's decals.
A little of the detail that comes through with Greg's decals.
0 2024/11/29 13:08:53
Color is metallic anthracite, vinyl decals and lacquer clear coat.
Color is metallic anthracite, vinyl decals and lacquer clear coat.
0 2024/11/29 13:08:51
The tool for tight fitting tires.
The tool for tight fitting tires.
0 2024/11/25 14:49:53
This is the top tube and it has dead paint as seen on the right side of the tube.
This is the top tube and it has dead paint as seen on the right side of the tube.
0 2024/11/23 14:10:12
0 2024/11/23 14:10:04
The paint is chipping away in a bunch of places and the chrome underlayment is showing.
The paint is chipping away in a bunch of places and the chrome underlayment is showing.
0 2024/11/23 14:10:01
finished with the install and now on to shop cleaning.
finished with the install and now on to shop cleaning.
0 2024/11/21 13:32:25
0 2024/11/21 13:31:58
New Campy adjuster screws and hardware.
New Campy adjuster screws and hardware.
0 2024/11/21 13:31:49
Cleaning the threads of the DO's.
Cleaning the threads of the DO's.
0 2024/11/21 13:31:46
No markings but has four flats on the cones.
No markings but has four flats on the cones.
0 2024/11/21 11:23:46
St. Sheldon will now ride with the tool box as it moves around the country.
St. Sheldon will now ride with the tool box as it moves around the country.
0 2024/11/19 15:24:16
ascherer did this artwork for the box to identify it as the pass around tool.
ascherer did this artwork for the box to identify it as the pass around tool.
0 2024/11/18 16:36:50
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences | Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.