Bike Forums
Campy record shift parts for the stash.
Campy record shift parts for the stash.
0 2025/02/06 14:30:06
These dustcaps fit my pedals.
These dustcaps fit my pedals.
0 2025/02/02 16:56:01
Pair of pedals that I won't use here.
Pair of pedals that I won't use here.
0 2025/02/02 13:35:30
Left arm with logo molded in.
Left arm with logo molded in.
0 2025/02/02 13:35:27
A bit of funky paint but still some good bones and the paint should clean off easily. Original crank and BB. Size is 23" and comes as found.
A bit of funky paint but still some good bones and the paint should clean off easily. Original crank and BB. Size is 23" and comes as found.
0 2025/01/31 16:33:08
This one came in to be scrapped, but is a nice bit of history that should be saved. Paint is funky but easily cleaned up.
This one came in to be scrapped, but is a nice bit of history that should be saved. Paint is funky but easily cleaned up.
0 2025/01/31 16:21:16
The skewers are marked Speidel and should be the correct ones for this set.
The skewers are marked Speidel and should be the correct ones for this set.
0 2025/01/31 15:50:41
These are ready for build into some new wheels. I have tried to get everything matching including the skewers. New labels ready for the new owner to put on.
These are ready for build into some new wheels. I have tried to get everything matching including the skewers. New labels ready for the new owner to put on.
0 2025/01/31 15:50:39
Just a lucky find at the co-op but it completes a set of hubs for me. 700's are likely the best of the French I have used.
Just a lucky find at the co-op but it completes a set of hubs for me. 700's are likely the best of the French I have used.
0 2025/01/29 16:32:53
Hard to say why he had the correct levers to complete my two sets, but it was a good match.
Hard to say why he had the correct levers to complete my two sets, but it was a good match.
0 2025/01/29 16:32:52
The real reason I grabbed it. The crank and Bottom bracket that some folks might find interesting for a build.
The real reason I grabbed it. The crank and Bottom bracket that some folks might find interesting for a build.
0 2025/01/28 18:14:55
Upgraded death fork with the reinforced solid aluminum connection and pinned.
Upgraded death fork with the reinforced solid aluminum connection and pinned.
0 2025/01/28 18:14:27
Cool paint scheme by what looks like Crayola.
Cool paint scheme by what looks like Crayola.
0 2025/01/28 18:14:24
Original NOS chuck from the 1980's.
Original NOS chuck from the 1980's.
0 2025/01/26 13:44:11
Headset caged bearings to the rescue.
Headset caged bearings to the rescue.
0 2025/01/24 09:46:55
Found these damaged bearings inside one of them.
Found these damaged bearings inside one of them.
0 2025/01/24 09:46:52
My favorite pedals. No tips to restrict wide feet.
My favorite pedals. No tips to restrict wide feet.
0 2025/01/24 09:46:48
Flea Bay bottom bracket. Was listed cheap with only pictures of the cups, but it was the whole thing!
Flea Bay bottom bracket. Was listed cheap with only pictures of the cups, but it was the whole thing!
0 2025/01/21 14:54:47
The cleared ones are pretty new looking and seem fine. The bottom set are pretty worn but may be of some use. The tag is the correct number for bearing replacements.
The cleared ones are pretty new looking and seem fine. The bottom set are pretty worn but may be of some use. The tag is the correct number for bearing replacements.
0 2025/01/20 12:39:06
Rear D. The pulleys are a bit rough but the new bearings are available locally and will be good again after a refresh.
Rear D. The pulleys are a bit rough but the new bearings are available locally and will be good again after a refresh.
0 2025/01/18 15:05:15
Headset spacers. Aluminum but the price was pretty nice. Better that the $1.50 per item from another supplier.
Headset spacers. Aluminum but the price was pretty nice. Better that the $1.50 per item from another supplier.
0 2025/01/18 15:05:11
Wire rush attachment for impact driver.
Wire rush attachment for impact driver.
0 2025/01/16 12:34:08
It is a bad resolution picture but you get the idea.
It is a bad resolution picture but you get the idea.
0 2025/01/16 12:23:40
bottom bracket bearings after new balls installed. Note the discoloration from the old balls in the bearing.
bottom bracket bearings after new balls installed. Note the discoloration from the old balls in the bearing.
0 2025/01/14 19:12:03
Cages with the bearings removed and ready for a good cleaning of the cage with a Dremel wire brush. New balls will be installed and cages tightened up before going into the parts stash.
Cages with the bearings removed and ready for a good cleaning of the cage with a Dremel wire brush. New balls will be installed and cages tightened up before going into the parts stash.
0 2025/01/14 19:12:00
These two compound pad style of brake pad holders are pretty nice and have the replaceable pads for the long haul.
These two compound pad style of brake pad holders are pretty nice and have the replaceable pads for the long haul.
0 2025/01/13 16:46:25
I think the blue anodized looks like a close match and I will go to the Kool Stop inventory to find a suitable pair of pads for the build.
I think the blue anodized looks like a close match and I will go to the Kool Stop inventory to find a suitable pair of pads for the build.
0 2025/01/13 16:39:51
Spacers for Italian bottom brackets from MTB tools
Spacers for Italian bottom brackets from MTB tools
0 2025/01/11 15:13:28
1mm spacers for Italian Bottom brackets from MTB tools.
1mm spacers for Italian Bottom brackets from MTB tools.
0 2025/01/11 14:43:51
The anodized Modolo I found as an orphan at the co-op. This is the only blue one I have found. No original pad holders so it will get some KS
The anodized Modolo I found as an orphan at the co-op. This is the only blue one I have found. No original pad holders so it will get some KS
0 2025/01/11 13:14:51
Campy almost finished, just have to find the pads for the blocks. They are somewhere in the disaster zone on my workbench, or in the stash boxes.
Campy almost finished, just have to find the pads for the blocks. They are somewhere in the disaster zone on my workbench, or in the stash boxes.
0 2025/01/11 13:14:47
Same for the front bolt through.
Same for the front bolt through.
0 2025/01/06 15:18:47
Rear caliper is bolt through with replacement KS pads.
Rear caliper is bolt through with replacement KS pads.
0 2025/01/06 15:18:45
Dia Compe Gran Compe calipers. These have replacement adjusters but otherwise everything is mainly original design.
Dia Compe Gran Compe calipers. These have replacement adjusters but otherwise everything is mainly original design.
0 2025/01/06 15:18:42
I think I found it!
I think I found it!
0 2025/01/02 14:50:58
After a quick cleaning from polishing adding dust caps and final loading of grease into the bearing races and replacing oil cap. Ready for a build in to a new wheel.
After a quick cleaning from polishing adding dust caps and final loading of grease into the bearing races and replacing oil cap. Ready for a build in to a new wheel.
0 2024/12/31 13:04:24
0 2024/12/31 13:04:22
After a good polishing and the hub is now back to nice and shiny.
After a good polishing and the hub is now back to nice and shiny.
0 2024/12/31 13:04:20
Hub is in the polishing fixture. it is still rather dull in finish even though clean.
Hub is in the polishing fixture. it is still rather dull in finish even though clean.
0 2024/12/31 13:04:18
When cones go bad! This pair of halves do however show that the cones are hardened all the way through. So I don't feel so bad about polishing aggressively to remove pitting, and then restoring to mirrir brightness.
When cones go bad! This pair of halves do however show that the cones are hardened all the way through. So I don't feel so bad about polishing aggressively to remove pitting, and then restoring to mirrir brightness.
0 2024/12/31 09:54:05
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences | Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.