Bike Forums
Raleigh LTD 3. The SA three speed system is intact with shifter and cabling. If anyone wants just the hubs and shift parts PM me. It leaves Monday morning.
Raleigh LTD 3. The SA three speed system is intact with shifter and cabling. If anyone wants just the hubs and shift parts PM me. It leaves Monday morning.
0 2024/06/08 14:53:10
I'm not sure about the vintage of the tool, but it looks to be complete with little use. The dies don't have huge thread cutter spacing like some of the others I have, but appear to be fine.
I'm not sure about the vintage of the tool, but it looks to be complete with little use. The dies don't have huge thread cutter spacing like some of the others I have, but appear to be fine.
0 2024/06/06 15:10:31
Some assembly required, but I think I can figure it out, and if not I ask the BF members to help me.
Some assembly required, but I think I can figure it out, and if not I ask the BF members to help me.
0 2024/06/06 15:10:29
installed on rear mech.
installed on rear mech.
0 2024/06/06 14:49:22
Two lever blades, and two clamps with nuts.
Two lever blades, and two clamps with nuts.
0 2024/06/02 14:36:46
complete after a rebuild and a new pair of covers from EuroAsia.
complete after a rebuild and a new pair of covers from EuroAsia.
0 2024/06/01 15:20:34
A nice longer stem, and some 3t bars that are only 39's, so another set will be used.
A nice longer stem, and some 3t bars that are only 39's, so another set will be used.
0 2024/06/01 11:08:19
The three levers form Shop Dog Bikes. Not the broken one on the left side. Pretty crusty but I think they will work.
The three levers form Shop Dog Bikes. Not the broken one on the left side. Pretty crusty but I think they will work.
0 2024/06/01 11:08:15
There are six singles available and will get a polish before going out to an end user. The mirror shown in the cone on the axle assembly is the proper finish.
There are six singles available and will get a polish before going out to an end user. The mirror shown in the cone on the axle assembly is the proper finish.
0 2024/05/31 15:11:01
The hub parts box. Lower left is front axles and upper center is rear axles. GS cones are in the lower left above axles, lock nuts above and the upper left has the SR cones.
The hub parts box. Lower left is front axles and upper center is rear axles. GS cones are in the lower left above axles, lock nuts above and the upper left has the SR cones.
0 2024/05/31 15:10:55
It can be used to align both caliper arms and chain rings when not correct. The wider section fits the caliper arms and the smaller slot fits the chain rings.
It can be used to align both caliper arms and chain rings when not correct. The wider section fits the caliper arms and the smaller slot fits the chain rings.
0 2024/05/26 18:52:04
I have this tool and normally don't even think about having to use it. It isn't big maybe 12" long but is incredible at what it does.
I have this tool and normally don't even think about having to use it. It isn't big maybe 12" long but is incredible at what it does.
0 2024/05/26 18:51:46
0 2024/05/26 18:51:26
0 2024/05/26 18:51:24
The front seems to be another close fit, so I will lock the calipers down after a good cleaning, and try to get the pads to match the rims.
The front seems to be another close fit, so I will lock the calipers down after a good cleaning, and try to get the pads to match the rims.
0 2024/05/26 12:05:27
The brake calipers are short reach, and appear to just barely enough room to get the pads on the rim. A previous owner had cut the tire guides off the pads, and I don't like the old Mathauser pads so a change will be in order.
The brake calipers are short reach, and appear to just barely enough room to get the pads on the rim. A previous owner had cut the tire guides off the pads, and I don't like the old Mathauser pads so a change will be in order.
0 2024/05/26 12:05:23
The wheels are on and the next thing will be a set of bars and stem to get a set up that I can ride.
The wheels are on and the next thing will be a set of bars and stem to get a set up that I can ride.
0 2024/05/26 12:05:16
Getting to test out the new stand and it looks to hold things well.
Getting to test out the new stand and it looks to hold things well.
0 2024/05/26 12:05:15
I had considered this dork disc, but as you can see the tabs will interfere with the turning of the freewheel when installed, so no DD on this build.
I had considered this dork disc, but as you can see the tabs will interfere with the turning of the freewheel when installed, so no DD on this build.
0 2024/05/24 14:46:49
All cleaned up, new paint on the rings and spaced at ultra 6. Runs smooth with very little noise so I am not going to break the body down for a rebuild.
All cleaned up, new paint on the rings and spaced at ultra 6. Runs smooth with very little noise so I am not going to break the body down for a rebuild.
0 2024/05/24 14:46:42
Freewheel body ready for the cogs to be re-installed.
Freewheel body ready for the cogs to be re-installed.
0 2024/05/23 20:41:38
Repainting after rust removal.
Repainting after rust removal.
0 2024/05/23 20:41:36
All of the bladed spokes, and the rim attaching nipples, and the brass nipples that are locked in place buy the aluminum nipples. And the hub. No cassette cause it didn't have one when I got it.
All of the bladed spokes, and the rim attaching nipples, and the brass nipples that are locked in place buy the aluminum nipples. And the hub. No cassette cause it didn't have one when I got it.
0 2024/05/19 14:24:06
The three parts of the spoke system after cleaning them up. Straight pull bladed spoke, alloy LH nipple and brass inner nipple.
The three parts of the spoke system after cleaning them up. Straight pull bladed spoke, alloy LH nipple and brass inner nipple.
0 2024/05/18 09:08:47
The spoke nipple assembly as first removed. The alloy outer body is LH thread and the inner body is a normal nipple made of brass.
The spoke nipple assembly as first removed. The alloy outer body is LH thread and the inner body is a normal nipple made of brass.
0 2024/05/18 09:08:42
The hub: 20 spoke with CF body and what appears to be a normal cassette.
The hub: 20 spoke with CF body and what appears to be a normal cassette.
0 2024/05/18 09:08:42
A very cool Mavic spoke wrench that fits three different size spoke nipples. Now to find the torch and tear a Mavic wheel apart
A very cool Mavic spoke wrench that fits three different size spoke nipples. Now to find the torch and tear a Mavic wheel apart
0 2024/05/17 14:39:33
I am hoping to make two use-able levers from all three of these damaged ones.
I am hoping to make two use-able levers from all three of these damaged ones.
0 2024/05/17 14:39:31
Bearings are clean and show very little wear, and the races show no damage marks.
Bearings are clean and show very little wear, and the races show no damage marks.
0 2024/05/17 14:17:16
English threading and clean with small scuffs from prior installation.
English threading and clean with small scuffs from prior installation.
0 2024/05/17 14:17:16
The logo has faded a bit.
The logo has faded a bit.
0 2024/05/15 10:23:31
A few scuffs or battle scars but functional.
A few scuffs or battle scars but functional.
0 2024/05/15 10:23:31
The test before final mounting of the display piece. I think it is gonna work.
The test before final mounting of the display piece. I think it is gonna work.
0 2024/05/12 14:37:33
The display part sez adjustable arms.
The display part sez adjustable arms.
0 2024/05/12 14:37:30
Old Pro-line speaker tripod
Old Pro-line speaker tripod
0 2024/05/12 14:37:26
I don't know anything about this company but I think it is going to work.
I don't know anything about this company but I think it is going to work.
0 2024/05/12 14:37:24
Weinmann pad inserts.
Weinmann pad inserts.
0 2024/05/09 16:04:21
Cross pads with post style mounts
Cross pads with post style mounts
0 2024/05/09 16:04:19
And two lower race pieces that are hard to find undamaged.
And two lower race pieces that are hard to find undamaged.
0 2024/05/08 15:35:31
The box of parts included a full bottom bracket.
The box of parts included a full bottom bracket.
0 2024/05/08 15:35:24
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences | Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.