Bike Forums
I think maybe a BMX ring with three different bolt patterns
I think maybe a BMX ring with three different bolt patterns
0 2023/12/18 10:44:51
It has a lot of new parts like tires, tubes and other consumables.
It has a lot of new parts like tires, tubes and other consumables.
0 2023/12/13 17:01:24
Bike is complete but needs a couple of cable housing decisions. I was going to use it on a trainer but I have too many bikes here.
Bike is complete but needs a couple of cable housing decisions. I was going to use it on a trainer but I have too many bikes here.
0 2023/12/13 17:01:19
A bit of time on the buffing wheel but results seem to be OK.
A bit of time on the buffing wheel but results seem to be OK.
0 2023/12/06 18:00:29
0 2023/12/06 18:00:20
These don't really have any indication as to year of manufacture, but the size is correct for NR cups.
These don't really have any indication as to year of manufacture, but the size is correct for NR cups.
0 2023/12/06 08:04:54
It has been prepped for shipping just prior to having a deal fall through, So just need to box it up.
It has been prepped for shipping just prior to having a deal fall through, So just need to box it up.
0 2023/12/05 15:38:36
A dent in the seat tube. Frame is straight and spaced normally for 1973.
A dent in the seat tube. Frame is straight and spaced normally for 1973.
0 2023/12/05 15:36:58
Head tube detail
Head tube detail
0 2023/12/05 15:36:30
0 2023/12/05 15:36:13
Bottle cage included
Bottle cage included
0 2023/12/05 15:35:40
Fork crown detail
Fork crown detail
0 2023/12/05 15:35:38
Frame detail
Frame detail
0 2023/12/05 15:34:36
Frame detail
Frame detail
0 2023/12/05 15:34:33
Frame detail
Frame detail
0 2023/12/05 15:34:32
Serial number
Serial number
0 2023/12/05 15:34:28
Ready to go back into service.
Ready to go back into service.
0 2023/12/05 11:15:04
All dressed up and ready to travel. Small parts and bottle cage still need to fit in a small box for the trip.
All dressed up and ready to travel. Small parts and bottle cage still need to fit in a small box for the trip.
0 2023/12/04 13:53:36
There is this dent on the non drive side of the seat tube. it can be easily seen on both the outside and inside of the seat tube. But with the seat tube installed upside down, you would need something on the order of a hydraulic tube bending tool to push the dent out. There is not enough room to get a mandrel inside the tube from the bottom bracket. So for now the dent is gonna stay.
There is this dent on the non drive side of the seat tube. it can be easily seen on both the outside and inside of the seat tube. But with the seat tube installed upside down, you would need something on the order of a hydraulic tube bending tool to push the dent out. There is not enough room to get a mandrel inside the tube from the bottom bracket. So for now the dent is gonna stay.
0 2023/12/04 13:45:32
Mel Pinto to the rescue! This set of pins are still available to buy to keep the tool in new working order.
Mel Pinto to the rescue! This set of pins are still available to buy to keep the tool in new working order.
0 2023/12/02 16:13:58
The pin spanner showed up without the pins! But...
The pin spanner showed up without the pins! But...
0 2023/12/02 16:13:56
And another picture trying to get the sparkle to show up. The color does a pretty good job of making the lug lining unnecessary.
And another picture trying to get the sparkle to show up. The color does a pretty good job of making the lug lining unnecessary.
0 2023/12/02 15:57:45
Hopefully this shows the sparkle in the paint
Hopefully this shows the sparkle in the paint
0 2023/12/02 15:57:40
More frame detail even though I think it is a Friday afternoon build after a wine break for lunch.
More frame detail even though I think it is a Friday afternoon build after a wine break for lunch.
0 2023/12/02 15:57:37
Seat after polishing today with most of the detail being pretty clean.
Seat after polishing today with most of the detail being pretty clean.
0 2023/12/02 15:57:37
Must be some kind of serial number FWIW. But the new paint is pretty good about frame detail.
Must be some kind of serial number FWIW. But the new paint is pretty good about frame detail.
0 2023/12/02 15:57:33
And it would have plenty of screamers about blasphemy
And it would have plenty of screamers about blasphemy
0 2023/12/01 15:29:02
It would certainly be a clash with the lavender color!
It would certainly be a clash with the lavender color!
0 2023/12/01 15:29:01
One of the right colors, but the wrong builder.
One of the right colors, but the wrong builder.
0 2023/12/01 15:24:22
The rust blooms are not even able to be seen after the PKI treatment
The rust blooms are not even able to be seen after the PKI treatment
0 2023/12/01 13:55:36
0 2023/12/01 13:55:22
Even matching bottle cage
Even matching bottle cage
0 2023/12/01 13:55:06
The coat is nice enough that the lug detail shows clearly
The coat is nice enough that the lug detail shows clearly
0 2023/12/01 13:54:42
There is a small dent on the stay that still shows. But the folks at PKI do some nice detail work cleaning up the frame prior to coating
There is a small dent on the stay that still shows. But the folks at PKI do some nice detail work cleaning up the frame prior to coating
0 2023/12/01 13:54:27
The shell after serious sandblasting and refinishing
The shell after serious sandblasting and refinishing
0 2023/12/01 13:54:13
0 2023/12/01 13:54:07
0 2023/12/01 13:54:02
More of the rust blooms
More of the rust blooms
0 2023/12/01 13:49:35
Rust damage to BB shell
Rust damage to BB shell
0 2023/12/01 13:49:26
Rust bloom on underside of top tube
Rust bloom on underside of top tube
0 2023/12/01 13:48:26
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences | Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.