Bike Forums
This is the side view of a ledge washer that has had the bushing portion shaved off, It is now a spacer washer (1mm thick) that can be used to get the correct cage plate spacing.
This is the side view of a ledge washer that has had the bushing portion shaved off, It is now a spacer washer (1mm thick) that can be used to get the correct cage plate spacing.
0 2024/02/05 08:45:32
This is the bushing ledge washer from the side view. Note the step down for the bushing portion of the washer.
This is the bushing ledge washer from the side view. Note the step down for the bushing portion of the washer.
0 2024/02/05 08:45:29
The new version of the bushing spacers as they come out of the mold.
The new version of the bushing spacers as they come out of the mold.
0 2024/02/05 08:45:29
Finished pad install and back to a normal look for the brake blocks.
Finished pad install and back to a normal look for the brake blocks.
0 2024/02/04 12:51:14
After removing a bit of the center oft he pad.
After removing a bit of the center oft he pad.
0 2024/02/04 12:51:10
The modification; remove a bit of the pad with a Dremel and sanding wheel.
The modification; remove a bit of the pad with a Dremel and sanding wheel.
0 2024/02/04 12:51:08
The pad and the holder. Note the post in the middle of the holder, which prevents the pad from full insertion.
The pad and the holder. Note the post in the middle of the holder, which prevents the pad from full insertion.
0 2024/02/04 12:51:04
Repair parts for rear derailleurs.
Repair parts for rear derailleurs.
0 2024/02/02 17:16:18
More Campy stash!
More Campy stash!
0 2024/02/02 17:16:17
Two sets of Campy replacement blocks and holders.
Two sets of Campy replacement blocks and holders.
0 2024/01/31 15:52:58
Some replacement blocks and holders for DA and some mountain brakes.
Some replacement blocks and holders for DA and some mountain brakes.
0 2024/01/31 15:52:56
The guy who spotted this, has assured me it is one if the last remaining prototypes made by Simplex for the C-Record group. Seems to have all the markings of a Simplex logo, so it may be a pretty rare item to have in the parts stash here.
The guy who spotted this, has assured me it is one if the last remaining prototypes made by Simplex for the C-Record group. Seems to have all the markings of a Simplex logo, so it may be a pretty rare item to have in the parts stash here.
0 2024/01/29 14:35:28
Kinda cool for a shipping bag!
Kinda cool for a shipping bag!
0 2024/01/29 14:34:05
How nice? Proposal for trade$ or how deep are your pockets
How nice? Proposal for trade$ or how deep are your pockets
0 2024/01/27 13:50:02
How nice? And what are you proposing for trade, or how deep are your pockets?
How nice? And what are you proposing for trade, or how deep are your pockets?
0 2024/01/27 13:38:41
Back together and all blinged up.
Back together and all blinged up.
0 2024/01/27 12:34:18
All apart and cleaned up.
All apart and cleaned up.
0 2024/01/27 12:34:17
When you look inside the body you can see where it anchors. The coiled part fits in this area and the grub bolt holds the spring in place.
When you look inside the body you can see where it anchors. The coiled part fits in this area and the grub bolt holds the spring in place.
0 2024/01/27 09:58:55
This is the part of the body where the spring is anchored.
This is the part of the body where the spring is anchored.
0 2024/01/27 09:58:53
0 2024/01/26 14:10:21
All blinged up and ready for more service.
All blinged up and ready for more service.
0 2024/01/26 09:48:05
Dualco grease gun for easy lube in side the body.
Dualco grease gun for easy lube in side the body.
0 2024/01/26 09:47:13
0 2024/01/26 09:40:42
0 2024/01/26 09:40:40
You can see where the break was just in front of the masking tape. There is a slight amount of the weld left inside the triangle to add just a bit of support to the repair area.
You can see where the break was just in front of the masking tape. There is a slight amount of the weld left inside the triangle to add just a bit of support to the repair area.
0 2024/01/26 08:22:13
A standard wire weld that has been reshaped and given a protective paint until further work can be done.
A standard wire weld that has been reshaped and given a protective paint until further work can be done.
0 2024/01/26 08:22:13
All cleaned up and ready for some green bling. Man was the solvent dirty from this one, and the cage plates had something on them that turned the aluminum black. So some extra time with a buffing wheel and polishing compound to bring them back.
All cleaned up and ready for some green bling. Man was the solvent dirty from this one, and the cage plates had something on them that turned the aluminum black. So some extra time with a buffing wheel and polishing compound to bring them back.
0 2024/01/25 14:45:10
Center of bearing set is 7mm and I always ask for the bushing set to get to the Campy 5mm bolt. The bushings will need a slight modification for a great fit, but it is only a few minutes to do.
Center of bearing set is 7mm and I always ask for the bushing set to get to the Campy 5mm bolt. The bushings will need a slight modification for a great fit, but it is only a few minutes to do.
0 2024/01/25 11:22:39
0 2024/01/25 11:14:03
When they are finished they are a bit brighter and with new jockeys they will run better. What you can't see is the machined down spacers for the inner side of the bearing race. The ?Chaser come with a 7mm diameter inner race hole and the spacers reduce the hole to 5mm which is thecampy bolt spec.
When they are finished they are a bit brighter and with new jockeys they will run better. What you can't see is the machined down spacers for the inner side of the bearing race. The ?Chaser come with a 7mm diameter inner race hole and the spacers reduce the hole to 5mm which is thecampy bolt spec.
0 2024/01/24 14:10:20
This one is pretty clean for what it is. It still has not been serviced in along time, and it is due for a good going over.
This one is pretty clean for what it is. It still has not been serviced in along time, and it is due for a good going over.
0 2024/01/24 14:10:16
And a newer conversion model from just last year.
And a newer conversion model from just last year.
0 2024/01/23 08:20:07
This is an original conversion unit (circa@1978) that surfaced while cleaning up the stash box.
This is an original conversion unit (circa@1978) that surfaced while cleaning up the stash box.
0 2024/01/23 08:20:01
Model number and back side.
Model number and back side.
0 2024/01/21 09:50:01
Fair condition but could use a cleaning, and an adjuster barrel.
Fair condition but could use a cleaning, and an adjuster barrel.
0 2024/01/21 09:49:59
A few parts scored at the co-op today.
A few parts scored at the co-op today.
0 2024/01/20 15:02:43
An exact match found today in the junk caliper box.
An exact match found today in the junk caliper box.
0 2024/01/20 12:59:02
My damaged caliper, The heat from a house fire melted the adjuster mechanism in two.
My damaged caliper, The heat from a house fire melted the adjuster mechanism in two.
0 2024/01/20 12:59:00
Two rolls of maroon tape and some lightly used wide tape.
Two rolls of maroon tape and some lightly used wide tape.
0 2024/01/20 12:49:00
Finished today's set after a couple of hours of wrap time.
Finished today's set after a couple of hours of wrap time.
0 2024/01/19 15:29:05
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences | Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.