Bike Forums
Face with all numbers on the moveable bezel to keep my play on time.
Face with all numbers on the moveable bezel to keep my play on time.
0 2023/01/05 13:32:25
Back side
Back side
0 2023/01/05 13:32:21
I think the set on the lower right is Shimano. The sets are complete with bronze bearings and washers.
I think the set on the lower right is Shimano. The sets are complete with bronze bearings and washers.
0 2023/01/03 14:26:45
Red bike with a lot of bling on it. Needs bar tape though. I didn't like the maroon cotton that I first put on it. You will need to take a journey to the bike Mecca of Indiana to pick it up! Har!
Red bike with a lot of bling on it. Needs bar tape though. I didn't like the maroon cotton that I first put on it. You will need to take a journey to the bike Mecca of Indiana to pick it up! Har!
0 2023/01/02 15:21:23
Lighting is not the best but they have some bling left in them. Rear measures in at 124 so there may be some extra room if you are spreading the stays. FW clearance is enough for a potential seven speed normal spacing but would definitely handle a seven ultra.
Lighting is not the best but they have some bling left in them. Rear measures in at 124 so there may be some extra room if you are spreading the stays. FW clearance is enough for a potential seven speed normal spacing but would definitely handle a seven ultra.
0 2023/01/02 13:04:22
The hub logo is the early version of the Shimano logo and they are both the same logo.
The hub logo is the early version of the Shimano logo and they are both the same logo.
0 2023/01/02 10:43:00
The rear axle and cones are in the parts washer. I can scare up a pair of skewers for them and make a complete set for your build.
The rear axle and cones are in the parts washer. I can scare up a pair of skewers for them and make a complete set for your build.
0 2023/01/02 10:42:57
Rim says 6106 tubular
Rim says 6106 tubular
0 2022/12/29 15:22:26
Hub is spaced for seven speed freewheel, no QR. Rim has little use marks on it
Hub is spaced for seven speed freewheel, no QR. Rim has little use marks on it
0 2022/12/29 15:22:23
New pulley wheels honeycomb design. Black paint with white printed logos.
New pulley wheels honeycomb design. Black paint with white printed logos.
0 2022/12/29 15:10:56
Says it is a Power Pro BB-7420 seem smooth.
Says it is a Power Pro BB-7420 seem smooth.
0 2022/12/29 14:15:50
As they came from the original package. Black oxide and nickel finish knurled ends.
As they came from the original package. Black oxide and nickel finish knurled ends.
0 2022/12/27 14:57:49
It was going to go on Maddona Gislane site any way so not going to stay here.
It was going to go on Maddona Gislane site any way so not going to stay here.
0 2022/12/26 12:35:55
0 2022/12/22 13:29:02
0 2022/12/22 13:28:59
Rear D's and BBs
Rear D's and BBs
0 2022/12/22 08:19:12
Front D's and headsets
Front D's and headsets
0 2022/12/22 08:19:06
Miss Cellanious skewer sand spare bits
Miss Cellanious skewer sand spare bits
0 2022/12/22 08:19:03
Hubs
Hubs
0 2022/12/22 08:19:01
The bench before today. That crank went on a bike that went to WGB and got held in captivity for almost a year during the lock-down at the border.
The bench before today. That crank went on a bike that went to WGB and got held in captivity for almost a year during the lock-down at the border.
0 2022/12/18 14:53:45
0 2022/12/18 14:51:29
Today the bench is clear. It likely won't stay this way for long, but it is a start for the new year.
Today the bench is clear. It likely won't stay this way for long, but it is a start for the new year.
0 2022/12/18 14:51:19
The spare Campy drawer at the beginning of the challenge. It has been cleared and looks like a tool box drawer again.
The spare Campy drawer at the beginning of the challenge. It has been cleared and looks like a tool box drawer again.
0 2022/12/18 14:51:05
The work bench wit way too many items on it. Does anyone see the 8mm wrench anywhere?
The work bench wit way too many items on it. Does anyone see the 8mm wrench anywhere?
0 2022/12/18 14:50:52
0 2022/12/18 14:50:50
32 hole low flange hub new sealed bearings
32 hole low flange hub new sealed bearings
0 2022/12/15 13:37:34
Plastic dust shield on crank bolt
Plastic dust shield on crank bolt
0 2022/12/15 13:05:43
Crank attaching bolt
Crank attaching bolt
0 2022/12/15 13:05:38
Skewer detail
Skewer detail
0 2022/12/15 13:05:35
Skewer, Rear derailleur spring for newer RD, and crank bolt
Skewer, Rear derailleur spring for newer RD, and crank bolt
0 2022/12/15 13:05:30
Newer style skewers.
Newer style skewers.
0 2022/12/15 12:55:23
NOS complete hub
NOS complete hub
0 2022/12/11 10:21:27
Took a while to get pics. I had to work on the War Department's car this afternoon. This is what I have found so far. I doubt I can find anything else even if I dig deeper in the trunk.
Took a while to get pics. I had to work on the War Department's car this afternoon. This is what I have found so far. I doubt I can find anything else even if I dig deeper in the trunk.
0 2022/12/09 14:45:08
This set of NIB calipers, Shimano BR-R451. Front and rear models shipping will take a larger Flat rate box.
This set of NIB calipers, Shimano BR-R451. Front and rear models shipping will take a larger Flat rate box.
0 2022/12/07 08:28:42
A close look at the hubs. Rear still in original wrapper and matching front out of wrapper. Newer style QR mechanisms. Spaced for 5 speed FW.
A close look at the hubs. Rear still in original wrapper and matching front out of wrapper. Newer style QR mechanisms. Spaced for 5 speed FW.
0 2022/12/07 08:28:31
Hubs and box as found in the trunk. Some of the glue for the box has disappeared and it is not in the best of shape.
Hubs and box as found in the trunk. Some of the glue for the box has disappeared and it is not in the best of shape.
0 2022/12/07 08:28:21
Top is the $4 tool I made today to send to you. Bottom is the Park tool I have had for about 35 years. They both work the same way.
Top is the $4 tool I made today to send to you. Bottom is the Park tool I have had for about 35 years. They both work the same way.
0 2022/12/05 16:50:23
This one has been in the toolbox drawer for probably the last 35 years, and I don't think I'll be using it.
This one has been in the toolbox drawer for probably the last 35 years, and I don't think I'll be using it.
0 2022/12/04 11:02:18
These are all available should duffer not want them.
These are all available should duffer not want them.
0 2022/12/01 08:32:26
Hubs are clean and lubricated with new grease. The logo is the campy shield from the mid 90's I'm guessing.
Hubs are clean and lubricated with new grease. The logo is the campy shield from the mid 90's I'm guessing.
0 2022/11/30 11:02:54
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences | Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.