Bike Forums
This scratch was hiding under a sticker about one inch long, and could be touched up easily.
This scratch was hiding under a sticker about one inch long, and could be touched up easily.
0 2022/09/19 15:42:32
Bike frame with fork attached
Bike frame with fork attached
0 2022/09/19 15:42:19
Type of frame
Type of frame
0 2022/09/19 15:42:16
The fork as it came back from the Shelbyville Chrome shop. It will need a bit of yellow paint fill for the panto on the crown.
The fork as it came back from the Shelbyville Chrome shop. It will need a bit of yellow paint fill for the panto on the crown.
0 2022/09/16 09:58:54
another crappy picture of the still in original shipping bits. I never opened it up but there is a reveal when it comes out of it's wrappers
another crappy picture of the still in original shipping bits. I never opened it up but there is a reveal when it comes out of it's wrappers
0 2022/09/16 09:58:50
Not the usual M cut-out but stamped instead. The 56 is a bit of a mystery unless they measured from the bottom of the shell to the top tube.
Not the usual M cut-out but stamped instead. The 56 is a bit of a mystery unless they measured from the bottom of the shell to the top tube.
0 2022/09/16 09:58:47
crappy picture, but yellow decals over blue with Made in Italy decal
crappy picture, but yellow decals over blue with Made in Italy decal
0 2022/09/16 09:58:46
Tubing sticker notes 653 likely for the main tubes
Tubing sticker notes 653 likely for the main tubes
0 2022/09/16 09:58:43
Checkout the Var logo on this item. Very cool for a C&V person.
Checkout the Var logo on this item. Very cool for a C&V person.
0 2022/08/14 16:04:08
Cool tool that I have wanted for a while.
Cool tool that I have wanted for a while.
0 2022/08/14 16:04:03
0 2022/08/06 16:43:18
Can't find these much anymore.
Can't find these much anymore.
0 2022/08/05 13:08:29
0 2022/08/05 13:08:27
no fender supports
no fender supports
0 2022/08/02 15:33:42
Universal replacement fork
Universal replacement fork
0 2022/08/02 15:33:39
Two presta only heads one NIB.
Two presta only heads one NIB.
0 2022/07/30 14:33:34
presta/shrader heads one new in box but all work well and Silca still has parts for them.
presta/shrader heads one new in box but all work well and Silca still has parts for them.
0 2022/07/30 14:33:32
Note that the nuts make a perfect contact so no slippage can occur.
Note that the nuts make a perfect contact so no slippage can occur.
0 2022/07/21 15:49:07
Both ends of the tool that screw together inside the bottom bracket and outside the stuck cup.
Both ends of the tool that screw together inside the bottom bracket and outside the stuck cup.
0 2022/07/21 15:49:04
Assembled bar for increased leverage in the tool.
Assembled bar for increased leverage in the tool.
0 2022/07/21 13:20:52
The ground down tip and a 4 head screwdriver body tapped out to hold set screws for two handed operation.
The ground down tip and a 4 head screwdriver body tapped out to hold set screws for two handed operation.
0 2022/07/21 13:20:50
The screwdriver that was adapted for a leverage bar. Mac Part number is accurate if you want to make one. Just remember it is pricey.
The screwdriver that was adapted for a leverage bar. Mac Part number is accurate if you want to make one. Just remember it is pricey.
0 2022/07/21 13:20:44
It sure is nice working on one when everything is new again.
It sure is nice working on one when everything is new again.
0 2022/07/20 14:53:03
Rear derailleur out of it's packaging after refurbishing and a quick install.
Rear derailleur out of it's packaging after refurbishing and a quick install.
0 2022/07/20 14:52:39
After setting and a quick adjustment it looks to be ready for action.
After setting and a quick adjustment it looks to be ready for action.
0 2022/07/20 14:52:29
Newer style of FD but still the same old Campy.
Newer style of FD but still the same old Campy.
0 2022/07/20 14:52:19
Only a few turns and the arm is secure and ready for the FD install. I had this right arm that I bought from e-bay about a year ago, but it is an orphan. I am now looking for a rider quality left arm to complete the set.
Only a few turns and the arm is secure and ready for the FD install. I had this right arm that I bought from e-bay about a year ago, but it is an orphan. I am now looking for a rider quality left arm to complete the set.
0 2022/07/20 12:30:14
Mac tools ratchet with a long handle for plenty of torque and a six point socket. I use an 8 grade bolt with new washers for the spindle assembly.
Mac tools ratchet with a long handle for plenty of torque and a six point socket. I use an 8 grade bolt with new washers for the spindle assembly.
0 2022/07/20 12:30:03
Same here for this lock ring tool about 35 years and still going strong.
Same here for this lock ring tool about 35 years and still going strong.
0 2022/07/20 12:29:46
More of the Var tools to set the adjustable cup. I have had this tool for at least 35 years and still have not had to replace the pins for it.
More of the Var tools to set the adjustable cup. I have had this tool for at least 35 years and still have not had to replace the pins for it.
0 2022/07/20 12:29:24
Used the Var cup installing tool for the fixed cup. Plenty of leverage to seat the cup properly.
Used the Var cup installing tool for the fixed cup. Plenty of leverage to seat the cup properly.
0 2022/07/20 12:29:12
After refurbishing the part looks like new for the install. I am thinking the yellow might blend in with the yellow bits on the frame logo.
After refurbishing the part looks like new for the install. I am thinking the yellow might blend in with the yellow bits on the frame logo.
0 2022/07/14 14:07:27
Refurbished NR rear derailleur with new stainless adjuster bolts and sealed pulleys.
Refurbished NR rear derailleur with new stainless adjuster bolts and sealed pulleys.
0 2022/07/14 14:07:25
0 2022/07/14 14:07:21
Nothing special on this BB choice. I am low on the Italian size but have plenty of English on hand. I guess I need to do a few more non-Italian frames.
Nothing special on this BB choice. I am low on the Italian size but have plenty of English on hand. I guess I need to do a few more non-Italian frames.
0 2022/07/14 14:06:37
The box of reconditioned front derailleurs. I picked one that ad damaged threads when it came fir the cable binder bolt. I re-tap the arm to 6X1 and use a button head stainless bolt to replace the original.
The box of reconditioned front derailleurs. I picked one that ad damaged threads when it came fir the cable binder bolt. I re-tap the arm to 6X1 and use a button head stainless bolt to replace the original.
0 2022/07/14 14:06:28
These held up the headset install for a couple of days. No chrome rings available so the HS has a racing stripe now.
These held up the headset install for a couple of days. No chrome rings available so the HS has a racing stripe now.
0 2022/07/14 14:06:24
Today's progress headset installed.
Today's progress headset installed.
0 2022/07/10 16:57:06
bit used to clean the BB threads
bit used to clean the BB threads
0 2022/07/09 15:37:28
Long screwdriver to push the oil cloth through the tubes.
Long screwdriver to push the oil cloth through the tubes.
0 2022/07/09 15:31:13
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences | Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.