Bike Forums
The oil cloth on a wire used to oil the insides of the tubes.
The oil cloth on a wire used to oil the insides of the tubes.
0 2022/07/09 15:31:06
Cleaning up the threads for the derailleur.
Cleaning up the threads for the derailleur.
0 2022/07/09 15:30:25
Shift boss cleaning with same tap.
Shift boss cleaning with same tap.
0 2022/07/09 15:30:23
Water bottle receiver cleaning with a 5X.8mm tap.
Water bottle receiver cleaning with a 5X.8mm tap.
0 2022/07/09 15:30:20
I buy the barrel end caps from VieVelo on e-bay. A couple of bucks each and gives a nice finishing touch for the like new look.
I buy the barrel end caps from VieVelo on e-bay. A couple of bucks each and gives a nice finishing touch for the like new look.
0 2022/07/07 14:30:50
When I install the adjuster screw the grease pushes out.( it confirms that I have indeed filled the threaded chamber).
When I install the adjuster screw the grease pushes out.( it confirms that I have indeed filled the threaded chamber).
0 2022/07/07 14:30:45
I have a light grease mix in the Dualco gun that I fill the screw opening with
I have a light grease mix in the Dualco gun that I fill the screw opening with
0 2022/07/07 14:30:40
Removal of any paint or debris in the drop out adjuster holes. 3X.05mm tap and easy- peasy to clean.
Removal of any paint or debris in the drop out adjuster holes. 3X.05mm tap and easy- peasy to clean.
0 2022/07/07 14:28:13
I buy the Stainless Steel screws by the 100 from Fastenal.
I buy the Stainless Steel screws by the 100 from Fastenal.
0 2022/07/07 14:28:10
What is in the toolkit for today's surgery.
What is in the toolkit for today's surgery.
0 2022/07/07 14:28:08
after a one hour bath and new lube with a lot of new bearings
after a one hour bath and new lube with a lot of new bearings
0 2022/07/04 14:52:04
freehub parts all rusted up
freehub parts all rusted up
0 2022/07/04 14:52:00
Fork crown close up. No tubing markings on the steering tube
Fork crown close up. No tubing markings on the steering tube
0 2022/06/30 09:19:55
57cm center to top
57cm center to top
0 2022/06/30 09:19:22
0 2022/06/30 09:18:29
Head tube lugs and fork crown
Head tube lugs and fork crown
0 2022/06/30 09:18:25
nothing special nylon cable guides
nothing special nylon cable guides
0 2022/06/30 09:18:15
0 2022/06/30 09:17:41
Rear dropouts with no serial number
Rear dropouts with no serial number
0 2022/06/30 09:15:34
seat tube lugs
seat tube lugs
0 2022/06/30 09:15:22
Bottom bracket shell
Bottom bracket shell
0 2022/06/30 09:15:11
Frame and fork
Frame and fork
0 2022/06/30 09:14:59
Carlton cutout lug in BB.
Carlton cutout lug in BB.
0 2022/06/22 15:17:36
Original decals on the down tube.
Original decals on the down tube.
0 2022/06/22 15:17:35
531 tubes throughout.
531 tubes throughout.
0 2022/06/22 15:17:30
Frame and fork. New paint for the top tub and is a close match but not perfect.
Frame and fork. New paint for the top tub and is a close match but not perfect.
0 2022/06/22 15:17:29
531 frame and fork
531 frame and fork
0 2022/06/21 15:36:50
Built by Carlton
Built by Carlton
0 2022/06/21 15:36:46
It is a Raleigh professional
It is a Raleigh professional
0 2022/06/21 15:36:42
Frame and fork a matched set.
Frame and fork a matched set.
0 2022/06/21 15:36:36
I'm thinking the top tube looks fine, but the paint match is being darn hard to get right.
I'm thinking the top tube looks fine, but the paint match is being darn hard to get right.
0 2022/06/20 17:17:33
I am trying to match 30 years of sun damage to the paint of the original.
I am trying to match 30 years of sun damage to the paint of the original.
0 2022/06/20 17:17:23
There was a large rust area about four inches long on this side of the top tube. Totally removed and ready for final coatings.
There was a large rust area about four inches long on this side of the top tube. Totally removed and ready for final coatings.
0 2022/06/06 14:42:32
The ears came out fairly clean and a couple of pinholes in the welds were tidied up.
The ears came out fairly clean and a couple of pinholes in the welds were tidied up.
0 2022/06/06 14:42:29
The front lug was damaged by a spray bomb paint job and could not be brought back to original paint without damage, so It will be recoated. Top tube underside where rust blooms were forming, after mitigation and primer coat.
The front lug was damaged by a spray bomb paint job and could not be brought back to original paint without damage, so It will be recoated. Top tube underside where rust blooms were forming, after mitigation and primer coat.
0 2022/06/06 14:42:25
nice sheen after the spray. 24 hours of cure time and then wax
nice sheen after the spray. 24 hours of cure time and then wax
0 2022/06/04 13:40:13
Clear Coat gloss
Clear Coat gloss
0 2022/06/04 13:40:13
a lot of hand sanding before primer goes on but thank goodness it is only the top tube that needs it
a lot of hand sanding before primer goes on but thank goodness it is only the top tube that needs it
0 2022/06/01 14:55:04
nor the rounded stamped that was factory but a bit more substantial
nor the rounded stamped that was factory but a bit more substantial
0 2022/06/01 14:55:00
excess weld removed
excess weld removed
0 2022/06/01 14:54:58
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences | Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.