Bike Forums
Frame is pretty tall. 9inch head tube and 21inch seat tube. Canti brake bosses and rack eyelets.
Frame is pretty tall. 9inch head tube and 21inch seat tube. Canti brake bosses and rack eyelets.
0 2022/04/25 14:49:47
0 2022/04/12 07:45:17
This was with a lacquer based clear coat. It may not show up well, but the reds have bled a bit and left a hazy yellow surround where the red ink is. I put the clear on heavy so It would show any problems. It might not bleed through if using very thin coats to build the clear up.
This was with a lacquer based clear coat. It may not show up well, but the reds have bled a bit and left a hazy yellow surround where the red ink is. I put the clear on heavy so It would show any problems. It might not bleed through if using very thin coats to build the clear up.
0 2022/04/12 07:44:50
0 2022/04/12 07:44:30
Clear coat with a urethane paint. No running of the ink and a good clear seal. Note the Reynolds decal for size comparison. The 2K clear coats are urethane based and should cover well but being the cheapo I am, I didn't buy a $30 can to test.
Clear coat with a urethane paint. No running of the ink and a good clear seal. Note the Reynolds decal for size comparison. The 2K clear coats are urethane based and should cover well but being the cheapo I am, I didn't buy a $30 can to test.
0 2022/04/12 07:44:15
0 2022/04/12 07:43:29
0 2022/04/12 07:43:08
The second prototype and final version
The second prototype and final version
0 2022/04/11 13:39:49
The first prototype of the new sticker
The first prototype of the new sticker
0 2022/04/11 13:39:46
The slide bars hold the uprights stable and have heavy bearings in the uprights. The slide is a single control bar for actuation utilizing an offset pair of control rods.
The slide bars hold the uprights stable and have heavy bearings in the uprights. The slide is a single control bar for actuation utilizing an offset pair of control rods.
0 2022/04/01 08:41:43
Heavy and a robust tool note the slide bars made of square tubing steel, and the single adjustment wheel that controls the side and latera runout gauge.
Heavy and a robust tool note the slide bars made of square tubing steel, and the single adjustment wheel that controls the side and latera runout gauge.
0 2022/04/01 08:41:41
After checking out pics of the BB, I dug these out of the tool box, and they are likely what you need for one side of the BB. My junk yard tool will remove the other cup if this one doesn't work.
After checking out pics of the BB, I dug these out of the tool box, and they are likely what you need for one side of the BB. My junk yard tool will remove the other cup if this one doesn't work.
0 2022/03/27 10:03:25
The way the tool fits in a cup to remove it from a BB. It is a junk yard tool but it does the work, you may need to find a washer for the inside of the cup to get a tight fit.
The way the tool fits in a cup to remove it from a BB. It is a junk yard tool but it does the work, you may need to find a washer for the inside of the cup to get a tight fit.
0 2022/03/27 10:03:10
The other tool that will remove a cup from either side. Make out of 1/2" drive sockets and race car lug and lug nuts.
The other tool that will remove a cup from either side. Make out of 1/2" drive sockets and race car lug and lug nuts.
0 2022/03/27 10:03:05
Var pin spanner. My first thoughts were to lock the pins down with washers and spindle bolts. But they may slip on the square ends of the BB cups.
Var pin spanner. My first thoughts were to lock the pins down with washers and spindle bolts. But they may slip on the square ends of the BB cups.
0 2022/03/27 10:03:03
Note the robust seals on the Nachi bearings.
Note the robust seals on the Nachi bearings.
0 2022/03/26 18:29:14
Hub with old bearing showing the rusted insides of the bearing. Nachi replacement bearings from local bearing house.
Hub with old bearing showing the rusted insides of the bearing. Nachi replacement bearings from local bearing house.
0 2022/03/26 18:29:11
0 2022/03/26 13:34:46
The dust cap as it came out still on the tool.
The dust cap as it came out still on the tool.
0 2022/03/22 15:45:02
A gentle tap with a small persuader.
A gentle tap with a small persuader.
0 2022/03/22 15:44:31
Use of an old solid axle as a drift pin.
Use of an old solid axle as a drift pin.
0 2022/03/22 15:42:37
Installed in the hub and capturing the dust caps.
Installed in the hub and capturing the dust caps.
0 2022/03/22 15:41:34
The blind bore tool.
The blind bore tool.
0 2022/03/22 15:41:24
How not to remove the dust covers!
How not to remove the dust covers!
0 2022/03/22 15:40:39
This is the bigger problem to be solved, appears to be bent.
This is the bigger problem to be solved, appears to be bent.
0 2022/03/22 15:39:22
The way it came in. pretty dirty and almost unrecognize-able.
The way it came in. pretty dirty and almost unrecognize-able.
0 2022/03/22 15:39:11
Rider quality FD with updated cable clamp bolt. Seat post could use a bit of polishing and cleaning. I'd put it in the rider quality range also.
Rider quality FD with updated cable clamp bolt. Seat post could use a bit of polishing and cleaning. I'd put it in the rider quality range also.
0 2022/03/22 13:14:22
The other side of the parts
The other side of the parts
0 2022/03/22 08:11:06
Some FD and RD parts for repairs
Some FD and RD parts for repairs
0 2022/03/22 08:11:03
Another cryptic logo in Italian.
Another cryptic logo in Italian.
0 2022/03/16 13:13:16
Cromor tubes for both frame and fork.
Cromor tubes for both frame and fork.
0 2022/03/16 13:12:55
Old aluminum head badge.
Old aluminum head badge.
0 2022/03/16 13:11:46
Fancy paint in sparkly silver.
Fancy paint in sparkly silver.
0 2022/03/16 13:11:43
I measure it as 56 ctc or 57 ctt.
I measure it as 56 ctc or 57 ctt.
0 2022/03/16 13:10:50
It says it is Italian.
It says it is Italian.
0 2022/03/16 13:10:08
0 2022/03/16 13:09:56
Regina with a bail out for the hills
Regina with a bail out for the hills
0 2022/03/15 15:03:37
Perfect with wide range gears for hills
Perfect with wide range gears for hills
0 2022/03/15 15:03:35
one perfect and one Regina Oro
one perfect and one Regina Oro
0 2022/03/15 15:03:30
front decals and pantographic detail
front decals and pantographic detail
0 2022/03/12 13:30:36
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences | Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.