Bike Forums
A shot of the northeast side of the track and the soccer facility. The scoreboard is partially visible in the right upper corner.
A shot of the northeast side of the track and the soccer facility. The scoreboard is partially visible in the right upper corner.
0 2021/05/26 09:03:28
Empty track except for a few last minute set ups. this is from the south end of the track looking east.
Empty track except for a few last minute set ups. this is from the south end of the track looking east.
0 2021/05/26 09:03:25
Tires at 25c which is a bit more than I expected but clearance is OK and it should ride a bit softer than an 18c.
Tires at 25c which is a bit more than I expected but clearance is OK and it should ride a bit softer than an 18c.
0 2021/05/23 17:27:41
Rear wheel after install.
Rear wheel after install.
0 2021/05/23 17:27:36
I had to change the brake securing nut and add a spacer to get the right spacing to hold the brake set secure.
I had to change the brake securing nut and add a spacer to get the right spacing to hold the brake set secure.
0 2021/05/23 17:27:33
Front wheel installed and checked for clearances.
Front wheel installed and checked for clearances.
0 2021/05/23 17:27:29
Added brake set and bottle cages, along with seat post.
Added brake set and bottle cages, along with seat post.
0 2021/05/23 17:27:25
Final true and the lateral true clearance of about half a mm. Note spacing on the left arm.
Final true and the lateral true clearance of about half a mm. Note spacing on the left arm.
0 2021/05/20 17:30:51
Truing for radial roundness
Truing for radial roundness
0 2021/05/20 17:30:45
Oiling the spoke nipples to make tightening easier.
Oiling the spoke nipples to make tightening easier.
0 2021/05/20 17:30:39
The tools I use for this step: screwdriver, bicycle research driver, and a handful of spoke wrenches.
The tools I use for this step: screwdriver, bicycle research driver, and a handful of spoke wrenches.
0 2021/05/20 17:30:37
The wheel goes into the truing stand.
The wheel goes into the truing stand.
0 2021/05/20 17:30:33
This little feller stopped in to observe/supervise my work. He is one of the early hatchlings of Brood X cicadas. Soon he will be joined by a few billion of his siblings and the noise will be incessant for early mornignto t=nightfall.
This little feller stopped in to observe/supervise my work. He is one of the early hatchlings of Brood X cicadas. Soon he will be joined by a few billion of his siblings and the noise will be incessant for early mornignto t=nightfall.
0 2021/05/20 07:35:11
Finished lacing and the wheel is ready to go to the truing stand. Total build time this morning with pictures was fifteen minutes.
Finished lacing and the wheel is ready to go to the truing stand. Total build time this morning with pictures was fifteen minutes.
0 2021/05/20 07:32:47
Nhe non-drive side spokes installed. Note that the star patterns for both sides are identical.
Nhe non-drive side spokes installed. Note that the star patterns for both sides are identical.
0 2021/05/20 07:31:03
By placing the spokes through the star pattern closest to the hub flange they will drop through a bit easier.
By placing the spokes through the star pattern closest to the hub flange they will drop through a bit easier.
0 2021/05/20 07:27:41
The last nine spokes being added from the drive side of the wheel.
The last nine spokes being added from the drive side of the wheel.
0 2021/05/20 07:27:39
The non-drive side of the rim and the current installed spokes.
The non-drive side of the rim and the current installed spokes.
0 2021/05/20 07:27:34
All spokes after will fall right into place for ease in the build process.
All spokes after will fall right into place for ease in the build process.
0 2021/05/19 18:54:12
Same here easy-peasy lacing
Same here easy-peasy lacing
0 2021/05/19 18:54:03
When the spokes are put from the inside out there are no impediments to the lacing
When the spokes are put from the inside out there are no impediments to the lacing
0 2021/05/19 18:53:54
both spokes in place and laced holding the wheel into position for the rest of the lacing work
both spokes in place and laced holding the wheel into position for the rest of the lacing work
0 2021/05/19 18:53:38
The spokes are placed into the hub from the inside to the outside. And then laced over two and under one spoke for it's final position. The way it looks in place
The spokes are placed into the hub from the inside to the outside. And then laced over two and under one spoke for it's final position. The way it looks in place
0 2021/05/19 18:53:35
These tow spokes will set the wheel for it's finsh
These tow spokes will set the wheel for it's finsh
0 2021/05/19 18:53:28
The way the wheel will look after lacing the non-drive spokes.
The way the wheel will look after lacing the non-drive spokes.
0 2021/05/19 18:13:27
The non-drive side spoke closest in the pic and drive side spoke leading the non-drive side spoke
The non-drive side spoke closest in the pic and drive side spoke leading the non-drive side spoke
0 2021/05/19 18:13:20
position of the non drive side spokes in the hub
position of the non drive side spokes in the hub
0 2021/05/19 18:12:58
bending the spokes to seat into the hub-shell
bending the spokes to seat into the hub-shell
0 2021/05/19 18:12:50
0 2021/05/19 18:12:30
the radial pattern from step one
the radial pattern from step one
0 2021/05/19 18:12:21
0 2021/05/19 18:11:55
0 2021/05/19 18:11:31
0 2021/05/19 18:11:14
0 2021/05/19 18:11:01
0 2021/05/19 18:10:48
added eight other drive side spokes. i will post extra pics in a later addition
added eight other drive side spokes. i will post extra pics in a later addition
0 2021/05/19 16:48:22
0 2021/05/19 16:47:55
note the placement of logos on top of each other
note the placement of logos on top of each other
0 2021/05/19 16:45:14
0 2021/05/19 16:45:09
first spoke into the hub toward the center of the hub
first spoke into the hub toward the center of the hub
0 2021/05/19 16:45:08
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences | Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.