Bike Forums
0 2021/05/19 16:45:06
Rim with log up
Rim with log up
0 2021/05/19 16:45:06
Hub with logo up
Hub with logo up
0 2021/05/19 16:45:03
The non-drive side flange to over-nut measurement
The non-drive side flange to over-nut measurement
0 2021/05/19 15:23:08
The The drive side flange to over-nut measurement.
The The drive side flange to over-nut measurement.
0 2021/05/19 15:23:03
The calculator needs to know the center of the hub so I measure the over lock nut spacing and divide by 2. Here it is 126mm so center of hub is 63mm. This part of the calculations done later.
The calculator needs to know the center of the hub so I measure the over lock nut spacing and divide by 2. Here it is 126mm so center of hub is 63mm. This part of the calculations done later.
0 2021/05/19 15:22:57
I read 604 for the inner rim diameter but I have to add two mm to account for the spokes seated in the SS inserts in the rim. Thus ERD is 606.
I read 604 for the inner rim diameter but I have to add two mm to account for the spokes seated in the SS inserts in the rim. Thus ERD is 606.
0 2021/05/19 15:22:55
I use a metal ruler that measures in cm/mm.
I use a metal ruler that measures in cm/mm.
0 2021/05/19 15:22:47
0 2021/05/19 15:10:16
The calculator needs to know the measurement of the over lock nuts here it is 126mm
The calculator needs to know the measurement of the over lock nuts here it is 126mm
0 2021/05/19 15:06:50
In measuring the rim I get 604 mm for the inner diameter of the rim. To account for the position of the spoke nipples on inside of the stainless inserts for the rim I add 2mm to the measured rim. In this case it is 606mm My ERD then is 606mm.
In measuring the rim I get 604 mm for the inner diameter of the rim. To account for the position of the spoke nipples on inside of the stainless inserts for the rim I add 2mm to the measured rim. In this case it is 606mm My ERD then is 606mm.
0 2021/05/19 15:02:25
the ERD or effective rim diameter measurement method I use a ruler marked in CM/MM
the ERD or effective rim diameter measurement method I use a ruler marked in CM/MM
0 2021/05/19 15:01:39
The threads are protected in coating so the bike will be easy to re-assemble
The threads are protected in coating so the bike will be easy to re-assemble
0 2021/05/18 17:36:23
They keep the chrome details the way they should be to stay period correct
They keep the chrome details the way they should be to stay period correct
0 2021/05/18 17:35:33
0 2021/05/18 17:34:56
the powder coaters clear coat the details of the serial numbers
the powder coaters clear coat the details of the serial numbers
0 2021/05/18 17:32:00
The detail of the methods of the painter's use of tapes to cover the essential pieces
The detail of the methods of the painter's use of tapes to cover the essential pieces
0 2021/05/18 17:31:44
0 2021/05/18 17:31:25
0 2021/05/18 15:56:18
clear coat over the serial number to make identification easy
clear coat over the serial number to make identification easy
0 2021/05/18 15:56:02
a bit of detail on the way they treat the chrome bits
a bit of detail on the way they treat the chrome bits
0 2021/05/18 15:55:40
they cover everything I ask for including shift bosses
they cover everything I ask for including shift bosses
0 2021/05/18 15:55:13
0 2021/05/18 15:54:57
The rims acquired at the local co-op from a bunch of Little Five Hundred training wheels. These things look almost new and will need only a bit of cleaning to do the wheel build.
The rims acquired at the local co-op from a bunch of Little Five Hundred training wheels. These things look almost new and will need only a bit of cleaning to do the wheel build.
0 2021/05/16 19:21:16
Spokes from 365 cycles and there should be enough to do both wheels.
Spokes from 365 cycles and there should be enough to do both wheels.
0 2021/05/16 19:21:11
Record hubs all cleaned up and ready to go.
Record hubs all cleaned up and ready to go.
0 2021/05/16 19:21:07
365 Cycles comes through with the two sides of the rear wheel. It is interesting that I can buy the spokes by the box for 56 cents per spoke but to buy them as individuals the the cost goes up to a dollar each.
365 Cycles comes through with the two sides of the rear wheel. It is interesting that I can buy the spokes by the box for 56 cents per spoke but to buy them as individuals the the cost goes up to a dollar each.
0 2021/05/13 17:28:08
0 2021/04/10 14:00:12
0 2021/04/10 13:19:05
Not a perfect match but some Testors paint and it will match. Also needs skewer
Not a perfect match but some Testors paint and it will match. Also needs skewer
0 2021/04/09 15:28:28
Bontrager rear wheel needs a new cassette and skewer
Bontrager rear wheel needs a new cassette and skewer
0 2021/04/09 15:27:45
Comes with a pair of tires but will need tubes and maybe rim strips
Comes with a pair of tires but will need tubes and maybe rim strips
0 2021/04/09 15:26:29
Spare parts to complete the build. Tektro brakes, spacers, dropout hanger, Deore XT rear, 105 Triple FD. extra clamp for the seat post, and extra stem
Spare parts to complete the build. Tektro brakes, spacers, dropout hanger, Deore XT rear, 105 Triple FD. extra clamp for the seat post, and extra stem
0 2021/04/09 15:24:23
Bars and brifters, plenty of adjustable room for stem height
Bars and brifters, plenty of adjustable room for stem height
0 2021/04/09 15:21:24
Triple crank
Triple crank
0 2021/04/09 15:21:00
50 cm
50 cm
0 2021/04/09 15:20:38
It says it is a racing frame, but the girl who turned it in said it was wall art for a year or two, and she rode the PCH with it.
It says it is a racing frame, but the girl who turned it in said it was wall art for a year or two, and she rode the PCH with it.
0 2021/04/09 15:19:06
Trek 1.2 frame
Trek 1.2 frame
0 2021/04/09 15:18:56
32 hole front wheel new LP18 rim, it needs a skewer you will need a rear wheel and chain etc. But I don't have one here at this time. I think I can find a couple of cassets for you.
32 hole front wheel new LP18 rim, it needs a skewer you will need a rear wheel and chain etc. But I don't have one here at this time. I think I can find a couple of cassets for you.
0 2021/04/08 15:38:42
new dropout, spare seat clamp, and spacer rings. you will need to find a cap and screw for the headset
new dropout, spare seat clamp, and spacer rings. you will need to find a cap and screw for the headset
0 2021/04/08 15:37:29
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences | Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.