Bike Forums
0 2021/02/02 12:49:29
0 2021/02/02 12:49:23
These are old school Reynolds frame tube and fork tube decals.
These are old school Reynolds frame tube and fork tube decals.
0 2021/01/26 12:56:10
0 2021/01/26 12:53:42
These are the alcohol decals from the factory for down tubes. The frame stickers are same application as current paste on ones. I think the USA stickers are from some of the team bikes in the early 80's or a few of the higher end models.
These are the alcohol decals from the factory for down tubes. The frame stickers are same application as current paste on ones. I think the USA stickers are from some of the team bikes in the early 80's or a few of the higher end models.
0 2021/01/26 12:53:29
These are the five colors that the down tube bands came in. I worked in a very large sales shop and these came in as replacements for damaged bands from the older Parks stands.
These are the five colors that the down tube bands came in. I worked in a very large sales shop and these came in as replacements for damaged bands from the older Parks stands.
0 2021/01/26 12:53:24
The initial reveal. Pics of each item will go out on a daily basis until it is all catalogued.
The initial reveal. Pics of each item will go out on a daily basis until it is all catalogued.
0 2021/01/25 14:41:19
bwilli88's BOC arrival at MH's shop.
bwilli88's BOC arrival at MH's shop.
0 2021/01/23 14:40:43
completed sets of hubs and bottom brackets, derailleur still needs to be dealt with and install sealed bearing pulleys.
completed sets of hubs and bottom brackets, derailleur still needs to be dealt with and install sealed bearing pulleys.
0 2021/01/23 13:54:44
0 2021/01/23 12:46:49
0 2021/01/23 12:46:27
0 2021/01/22 14:34:05
0 2021/01/22 14:33:42
0 2021/01/22 14:24:11
0 2021/01/22 14:23:03
0 2021/01/22 14:22:41
Fuji frame decal indicating tubing type
Fuji frame decal indicating tubing type
0 2021/01/20 16:05:03
frame paint still has decals but will have to come off
frame paint still has decals but will have to come off
0 2021/01/20 16:04:02
the rear didn't fare very well
the rear didn't fare very well
0 2021/01/20 16:03:10
front wheel is almost intact the bikes were hung on a steel rack and the worst damage was to the area near the top of the rack. close look to the bars show how the tape literally melted on the bars
front wheel is almost intact the bikes were hung on a steel rack and the worst damage was to the area near the top of the rack. close look to the bars show how the tape literally melted on the bars
0 2021/01/20 15:59:31
the fire damage doesn't show well but the paint is destroyed and the tires were burned off the rear rim
the fire damage doesn't show well but the paint is destroyed and the tires were burned off the rear rim
0 2021/01/20 15:59:15
This is how everything goes together. Each piece clamps on the cup when screwed together. Then the tool can be tightened with a 1/2" drive socket as shown, or if extra leverage is needed a long breaker bar can be used. I have a 2 foot bar here in the shop for plenty of extra leverage.
This is how everything goes together. Each piece clamps on the cup when screwed together. Then the tool can be tightened with a 1/2" drive socket as shown, or if extra leverage is needed a long breaker bar can be used. I have a 2 foot bar here in the shop for plenty of extra leverage.
0 2021/01/18 15:05:06
This picture shows the fit of the tool inside the cup. The stud has a clearance of about 2mm (the same as my Var fixed cup tool).
This picture shows the fit of the tool inside the cup. The stud has a clearance of about 2mm (the same as my Var fixed cup tool).
0 2021/01/18 15:04:48
This is how the pieces fit together to clamp the cup. The tool actually clamps the cup by engaging the cup by the center area inside the races 0f the cup.
This is how the pieces fit together to clamp the cup. The tool actually clamps the cup by engaging the cup by the center area inside the races 0f the cup.
0 2021/01/18 15:04:39
The tool is two pieces that fit together clamping the cup between them. The length on each piece needs to be long enough to extend past the outer shell of the bottom bracket. Each piece and a BB cup pictured.
The tool is two pieces that fit together clamping the cup between them. The length on each piece needs to be long enough to extend past the outer shell of the bottom bracket. Each piece and a BB cup pictured.
0 2021/01/18 15:04:20
0 2021/01/16 16:47:36
0 2021/01/16 16:30:36
0 2021/01/13 16:18:52
0 2021/01/13 16:07:07
0 2021/01/13 16:06:58
not a great picture but I hope you can see what the rings look like. I took these out of some Mavic Tubulars so may have been someone's race wheels
not a great picture but I hope you can see what the rings look like. I took these out of some Mavic Tubulars so may have been someone's race wheels
0 2021/01/08 15:33:54
I have not cleaned them, so a good cleaning and lubrication is in order
I have not cleaned them, so a good cleaning and lubrication is in order
0 2021/01/08 15:32:48
0 2021/01/03 13:33:03
0 2021/01/03 13:32:53
0 2021/01/02 18:57:10
0 2021/01/02 18:56:35
a newer version of the Record rear hub. I don't have anything it fits so it is leaving
a newer version of the Record rear hub. I don't have anything it fits so it is leaving
0 2021/01/01 17:27:13
most of this is broken or damaged like the two aluminum arms (one needs a heli-coil and the other is a cut apart right arm to look like a left. That arm would break and ankle if a pedal was attached to it on the left side.)
most of this is broken or damaged like the two aluminum arms (one needs a heli-coil and the other is a cut apart right arm to look like a left. That arm would break and ankle if a pedal was attached to it on the left side.)
0 2021/01/01 16:57:19
0 2021/01/01 16:56:46
The reveal as it came into the shop.
The reveal as it came into the shop.
0 2020/12/31 13:35:24
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences | Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.