What would be faster used Schwinn Paramount or entry level Trek Road bike?
#26
Senior Member
Join Date: Jun 2013
Location: Bozeman
Posts: 4,094
Bikes: 199? Landshark Roadshark, 198? Mondonico Diamond, 1987 Panasonic DX-5000, 1987 Bianchi Limited, Univega... Chrome..., 1989 Schwinn Woodlands, Motobecane USA Record, Raleigh Tokul 2
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1131 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Buy the newer bike. For someone with little to no knowledge of cycling, buying an old Paramount - or any vintage bike - is not a good idea, imo. Also as others have said, you need to get yourself in shape, the bike really has very little to do with how fast or far you'll go. Even if you could afford a $10k race bike, you'd still get killed by people on much lesser rides going by what you said in your other thread. Practice makes perfect..
Buy the old bike. Why? Because you won't be afraid to screw it up. I own a few high end steel road bikes from the 80s and 90s. They are miles ahead of any entry level bike I could buy today. I know because I own one of those too. My steel Landshark with full dura ace 7400 is 100x better and more comfortable than riding a modern entry level aluminum bike with Tigara or 105. And yes, I can tell the difference in brifters between those. The shifting is more crisp, quicker, and is much more "positive." I have to move my dura ace lever a half inch (at the end of the lever) to shift. I have to move my sora lever 2-4 inches to accomplish the same thing.
My theory is this. If you buy old high end bikes, you're getting the best of the best. The absolute best, no holds barred components that are extremely nice. Whereas if you're buying a modern entry level you're getting the cheap, heavy, ugly sister to the best of the best.
Not to mention the price. You could easily buy 3-4 high end steel road bikes from the 80s-90s for less than a single entry level road bike.
In my garage right now I have 3 amazing steel road bikes from '85-'96. Two are hand built custom bikes (built for someone else obviously), one from italy, one from the US, and the last is a mass produced, but still very nice italian bike. I also have a modern entry level road bike. Between the three old steel bikes I've spent less than half of the money I spent on that entry level bike. Guess which ones get ridden more? In fact, the modern bike is my "rain" bike, that's how much I care about it.
And, if you buy an old bike and fix it up to spend the same amount of money, you end up with a truly bada** bike.
In conclusion: Buy the high end old bike. Take it to a shop and pay them $100-$150 to do a complete overhaul. That way you end up with a very nice bike that works well and you didn't have to work on. And you still end up spending less than half of a new bike.
Last edited by corrado33; 05-19-17 at 03:29 PM.
#27
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 643 Times
in
364 Posts
Why that's easy.
Whichever bike fits you better will definitely be faster and the faster you are able to ride the greater difference it will make.
Riders fret endlessly about details like shifting systems and components, wheels and tire rolling resistance. Once you surpass about 15 MPH, however, the effect of all other factors combined on your speed is exceeded by the energy that's required to push your torso through the air.
If you want to go faster, work on your position on the bike.
Whichever bike fits you better will definitely be faster and the faster you are able to ride the greater difference it will make.
Riders fret endlessly about details like shifting systems and components, wheels and tire rolling resistance. Once you surpass about 15 MPH, however, the effect of all other factors combined on your speed is exceeded by the energy that's required to push your torso through the air.
If you want to go faster, work on your position on the bike.
__________________
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
#28
Senior Member
The best analogy I can come up with is: You can drive a 1970 Fastback Mustang or a 2017 Mustang. The '17 is faster, has better handling and should be more reliable, but I'll feel a little more at one with the road driving the '70. Not to mention it'll be a conversation piece with true aficionados.
BTW, I have both, a 2006 Trek and a custom built from 1983
BTW, I have both, a 2006 Trek and a custom built from 1983
#29
Senior Member
The best analogy I can come up with is: You can drive a 1970 Fastback Mustang or a 2017 Mustang. The '17 is faster, has better handling and should be more reliable, but I'll feel a little more at one with the road driving the '70. Not to mention it'll be a conversation piece with true aficionados.
BTW, I have both, a 2006 Trek and a custom built from 1983
BTW, I have both, a 2006 Trek and a custom built from 1983
True, true but the same could have been said in e.g. '83... I could'a had'a '60 Schwinn Continental or maybe even a '63 15 speed Schwinn Sierra...
#30
Senior Member
I'm in Chicago. Putting a '91 58cm Basso on ebay today. Gotta pay my rent next week and I am short. $400 takes it. PM me if interested.
#31
Banned
Join Date: May 2017
Posts: 113
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 947 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I don't understand why you limited yourself to these two bikes, they're so different. You can get mint/hardly ridden vintage road bikes on local Craigslist's if you shop for couple months at giveaway prices. Learn the basics of repacking bearings and other adjustments and when you're ready sell that and buy what you really want. With an old Paramount you're probably going to need a new saddle and rims right off the bat besides the usual refurb costs. Gotta learn how to fix and maintain your own bikes to not be in the red at the start with vintage bikes.
Believe it or not Walmart might be good choice for you. Be prepared to go through all the bearings, the couple kids bikes I bought had the bearing adjustments way too tight, rolling resistance for sure.
Believe it or not Walmart might be good choice for you. Be prepared to go through all the bearings, the couple kids bikes I bought had the bearing adjustments way too tight, rolling resistance for sure.
#32
Senior Member
Join Date: Jan 2012
Location: Virginia
Posts: 339
Bikes: Motobecane Century Pro Ti Disc
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 69 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
So, fix it? Replace the worn components? My C&V bikes are no more or less finnicky than my fiancee's new road bike, and my old Miyata has the smoothest and quietest drivetrain I have ever ridden on. If you are going to compare worn out components, at least compare them to a worn out modern bike too, where I'd actually imagine the friction shifting and looser tolerances actually benefits the older system. Anyone buying used bikes could easily wind up with a worn out dud from either era, but a worn out old bike to a off-the-floor new bike is hardly a fair comparison.
But is it faster than any other road bike you may ride? I think few will argue that a road bike isn't faster than a hybrid, the argument becomes much more nuanced when the question becomes "Is road bike A or B faster?"
But is it faster than any other road bike you may ride? I think few will argue that a road bike isn't faster than a hybrid, the argument becomes much more nuanced when the question becomes "Is road bike A or B faster?"
Vintage bicycles really can not be upgraded to modern cassette/ hub combination due to drop out widths. You can force fit a cassette/hub assembly into a 126mm width freewheel, but its no fun. You can get the rear drop outs re-bent and hopefully the will be re-bent straight. A lot of vintage bicycles do not have index shifting, which leaves you searching for the right gear.
Vintage bicycles are a lot like vintage cars. They are nice to own and look at and to take to shows and charity rides but not really practical to ride everyday if you have a choice. Older style freewheels are getting harder to find, the older style stems are also getting harder to find. It is hard to beat new technologies and the new standards.
I will also argue that a road bike IS faster than a hybrid, given the cyclist riding the road and hybrid are equal.
Last edited by 2 Piece; 05-20-17 at 11:03 AM.
#33
Banned
Steel frames Can be spread, C&V thread on the topic is full of successes.
Faster .. is WORK !
Faster .. is WORK !
#34
Full Member
Join Date: Aug 2014
Location: California
Posts: 343
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 77 Post(s)
Likes: 0
Liked 2 Times
in
1 Post
If your plan is to buy the bike on credit and slowly pay it off over time, you can't afford the bike. If you put $20 into a jar every week, you will be able to pay cash for the bike in a year and that will give you lots of time to research what you really want in a bicycle.
#35
Senior Member
Join Date: Aug 2010
Location: Utah
Posts: 8,680
Bikes: Paletti,Pinarello Monviso,Duell Vienna,Giordana XL Super,Lemond Maillot Juane.& custom,PDG Paramount,Fuji Opus III,Davidson Impulse,Pashley Guv'nor,Evans,Fishlips,Y-Foil,Softride, Tetra Pro, CAAD8 Optimo,
Mentioned: 156 Post(s)
Tagged: 0 Thread(s)
Quoted: 2326 Post(s)
Liked 4,997 Times
in
1,780 Posts
Freewheels on vintage bicycles all have a wiggle in the due to the thread pitch on to the hub and can not be fixed.
Vintage bicycles really can not be upgraded to modern cassette/ hub combination due to drop out widths. You can force fit a cassette/hub assembly into a 126mm width freewheel, but its no fun. You can get the rear drop outs re-bent and hopefully the will be re-bent straight. A lot of vintage bicycles do not have index shifting, which leaves you searching for the right gear.
Vintage bicycles are a lot like vintage cars. They are nice to own and look at and to take to shows and charity rides but not really practical to ride everyday if you have a choice. Older style freewheels are getting harder to find, the older style stems are also getting harder to find. It is hard to beat new technologies and the new standards.
I will also argue that a road bike IS faster than a hybrid, given the cyclist riding the road and hybrid are equal.
Vintage bicycles really can not be upgraded to modern cassette/ hub combination due to drop out widths. You can force fit a cassette/hub assembly into a 126mm width freewheel, but its no fun. You can get the rear drop outs re-bent and hopefully the will be re-bent straight. A lot of vintage bicycles do not have index shifting, which leaves you searching for the right gear.
Vintage bicycles are a lot like vintage cars. They are nice to own and look at and to take to shows and charity rides but not really practical to ride everyday if you have a choice. Older style freewheels are getting harder to find, the older style stems are also getting harder to find. It is hard to beat new technologies and the new standards.
I will also argue that a road bike IS faster than a hybrid, given the cyclist riding the road and hybrid are equal.
__________________
Steel is real...and comfy.
Steel is real...and comfy.
#36
Senior Member
Join Date: Jun 2007
Location: Wisconsin
Posts: 6,319
Bikes: 2012 Salsa Casseroll, 2009 Kona Blast
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1031 Post(s)
Liked 208 Times
in
146 Posts
I feel stupid having this obsession really wanting someday to buy myself a road bike wasting money. I bought a Trek Hybrid a couple months ago should be happy with that, just can't get the thought of owning a road bike out of my head it is like an obsession. I could only afford the cheapest road bike Trek or Giant offers. I would slowly pay if off on credit. Would getting an entry level Trek Road bike, like $1,000 bike be better than say buying a used Schwinn Paramount off of eBay? Was trying figure out what would be the best road bike to buy for no more than $1,000. The problem with buying a used Schwinn Paramount is no warranty and don't know if the bike is in as good condition as seller on eBay claims.
What bike would be faster and a better bike? A used Schwinn Paramount or like a $1,000 entry level Trek or Giant road bike?
What bike would be faster and a better bike? A used Schwinn Paramount or like a $1,000 entry level Trek or Giant road bike?
Buy yourself a Schwinn Paramount and you get one of the best hand made bikes made, 35 or 40 years ago. It is a classic, but it probably has downtube shifters, standard double chainrings, and 5 or 6 speed freewheel. All out of date, but modernizing a Paramount is a bit like drawing a moustache on the Mona Lisa.
IMO, there is no comparison. If you are looking to ride a bike fast, the entry level modern bike is the way to go. If you are asking which is the better bike, the Paramount is a classic, and by far the more desireable bike.
FWIW, it isn't an either/or, as there are other alternatives. There are vintage bikes that are not as collectible as the Paramount, where you could play around with putting modern components on. And, there are modern mid level road bikes that 3 to 10 years old that are functionally almost identical to a modern entry level, maybe a bit better, available for 1/3 to 1/2 the cost of a modern bike.
Late last fall, I worked out a deal a used road bike for my son from a LBS. He needed a road bike as he had outgrown the hybrid he was riding for around town and road rides with his mother and me. Problem was, we had only recently paid a bunch of money for a new mountain bike and I didn't want to spend $900 or so for a new Trek or Giant road bike for occasional use.
My out of pocket was $225, though I did throw in a very old mountain bike that was just taking up space in my garage as part of the deal. It was sort of a one off project. The frame is a vintage Gitane from the early 80s, but surprisingly light. Standard double, which with a modern cassette is insanely tall gearing for an old guy like me, but perfectly functional for a teenager who competes in mountain bike races. Some quick research suggested it was an mid to upper end frame when it was new. Somebody put modern brifters on it sometime in the 90s, as they were Shimano 600 (the predecessor to 105) and it was 8 speed. The derailleurs are modern entry level Shimano. The package is completed by two mismatched wheels, one Mavic Open Pro and other Velocity. But, both wheels came with Ultegra hubs. And, older Ultegra brakes.
If you look around and have patience, deals like that are around. You just need to know what to look for.
#37
Senior Member
Join Date: Jun 2007
Location: Wisconsin
Posts: 6,319
Bikes: 2012 Salsa Casseroll, 2009 Kona Blast
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1031 Post(s)
Liked 208 Times
in
146 Posts
Freewheels on vintage bicycles all have a wiggle in them due to the thread pitch on to the hub and can not be fixed.
Vintage bicycles really can not be upgraded to modern cassette/ hub combination due to drop out widths. You can force fit a cassette/hub assembly into a 126mm width freewheel, but its no fun. You can get the rear drop outs re-bent and hopefully the will be re-bent straight. A lot of vintage bicycles do not have index shifting, which leaves you searching for the right gear.
Vintage bicycles are a lot like vintage cars. They are nice to own and look at and to take to shows and charity rides but not really practical to ride everyday if you have a choice. Older style freewheels are getting harder to find, the older style stems are also getting harder to find. It is hard to beat new technologies and the new standards.
I will also argue that a road bike IS faster than a hybrid, given the cyclist riding the road and hybrid are equal.
Vintage bicycles really can not be upgraded to modern cassette/ hub combination due to drop out widths. You can force fit a cassette/hub assembly into a 126mm width freewheel, but its no fun. You can get the rear drop outs re-bent and hopefully the will be re-bent straight. A lot of vintage bicycles do not have index shifting, which leaves you searching for the right gear.
Vintage bicycles are a lot like vintage cars. They are nice to own and look at and to take to shows and charity rides but not really practical to ride everyday if you have a choice. Older style freewheels are getting harder to find, the older style stems are also getting harder to find. It is hard to beat new technologies and the new standards.
I will also argue that a road bike IS faster than a hybrid, given the cyclist riding the road and hybrid are equal.
#38
Senior Member
Join Date: Jan 2012
Location: Virginia
Posts: 339
Bikes: Motobecane Century Pro Ti Disc
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 69 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
LOL, so wrong. Fitting a 130mm modern wheel into a vintage frame spaced at 126mm is no problem at all. You can have it done easily and professionally if you want but I'm running modern gear on quite a few CV bikes. Quill stems are plentiful too unless so weird unique size. I'm not saying CV bikes are for everyone but please at least be informed before sharing information. Any competent bike shop can align dropouts if you do want to spread the frame and am worried about it.
You making me laugh out loud as well. Guess you better tell all the bicycle manufactures to go back to 126mm no need for 130mm, or maybe tell them just to make 130mm and that way the free wheel guys can just squeeze the rear drop outs to fit their 126mm and the guys using 135mm can re bend their drop outs to fit. Just think how much money they could save having to only make one size drop out spacing frame! Of course I think they are now making some 146mm spacing and those guys are going to be out of luck. I did state you could bend your 126mm to fit 130mm. Still doesn't do anything about the vintage parts being practically obsolete. By the time the OP who is on a small budget and seems to have very little wrenching experience, tries to update a vintage frame he will be dollars had to just go ahead and buy newer spec'd bicycle.
#39
Senior Member
Join Date: Jun 2007
Location: Wisconsin
Posts: 6,319
Bikes: 2012 Salsa Casseroll, 2009 Kona Blast
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1031 Post(s)
Liked 208 Times
in
146 Posts
You making me laugh out loud as well. Guess you better tell all the bicycle manufactures to go back to 126mm no need for 130mm, or maybe tell them just to make 130mm and that way the free wheel guys can just squeeze the rear drop outs to fit their 126mm and the guys using 135mm can re bend their drop outs to fit. Just think how much money they could save having to only make one size drop out spacing frame! Of course I think they are now making some 146mm spacing and those guys are going to be out of luck. I did state you could bend your 126mm to fit 130mm. Still doesn't do anything about the vintage parts being practically obsolete. By the time the OP who is on a small budget and seems to have very little wrenching experience, tries to update a vintage frame he will be dollars had to just go ahead and buy newer spec'd bicycle.
#40
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,517
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2747 Post(s)
Liked 3,401 Times
in
2,058 Posts
Vintage bicycles really can not be upgraded to modern cassette/ hub combination due to drop out widths. You can force fit a cassette/hub assembly into a 126mm width freewheel, but its no fun. You can get the rear drop outs re-bent and hopefully the will be re-bent straight. A lot of vintage bicycles do not have index shifting, which leaves you searching for the right gear.
https://www.bikeforums.net/classic-vi...i-s-ergos.html
#41
Senior Member
Join Date: Jun 2007
Location: Wisconsin
Posts: 6,319
Bikes: 2012 Salsa Casseroll, 2009 Kona Blast
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1031 Post(s)
Liked 208 Times
in
146 Posts
I'll have to partially disagree with you here.
Buy the old bike. Why? Because you won't be afraid to screw it up. I own a few high end steel road bikes from the 80s and 90s. They are miles ahead of any entry level bike I could buy today. I know because I own one of those too. My steel Landshark with full dura ace 7400 is 100x better and more comfortable than riding a modern entry level aluminum bike with Tigara or 105. And yes, I can tell the difference in brifters between those. The shifting is more crisp, quicker, and is much more "positive." I have to move my dura ace lever a half inch (at the end of the lever) to shift. I have to move my sora lever 2-4 inches to accomplish the same thing.
My theory is this. If you buy old high end bikes, you're getting the best of the best. The absolute best, no holds barred components that are extremely nice. Whereas if you're buying a modern entry level you're getting the cheap, heavy, ugly sister to the best of the best.
Not to mention the price. You could easily buy 3-4 high end steel road bikes from the 80s-90s for less than a single entry level road bike.
In my garage right now I have 3 amazing steel road bikes from '85-'96. Two are hand built custom bikes (built for someone else obviously), one from italy, one from the US, and the last is a mass produced, but still very nice italian bike. I also have a modern entry level road bike. Between the three old steel bikes I've spent less than half of the money I spent on that entry level bike. Guess which ones get ridden more? In fact, the modern bike is my "rain" bike, that's how much I care about it.
And, if you buy an old bike and fix it up to spend the same amount of money, you end up with a truly bada** bike.
In conclusion: Buy the high end old bike. Take it to a shop and pay them $100-$150 to do a complete overhaul. That way you end up with a very nice bike that works well and you didn't have to work on. And you still end up spending less than half of a new bike.
Buy the old bike. Why? Because you won't be afraid to screw it up. I own a few high end steel road bikes from the 80s and 90s. They are miles ahead of any entry level bike I could buy today. I know because I own one of those too. My steel Landshark with full dura ace 7400 is 100x better and more comfortable than riding a modern entry level aluminum bike with Tigara or 105. And yes, I can tell the difference in brifters between those. The shifting is more crisp, quicker, and is much more "positive." I have to move my dura ace lever a half inch (at the end of the lever) to shift. I have to move my sora lever 2-4 inches to accomplish the same thing.
My theory is this. If you buy old high end bikes, you're getting the best of the best. The absolute best, no holds barred components that are extremely nice. Whereas if you're buying a modern entry level you're getting the cheap, heavy, ugly sister to the best of the best.
Not to mention the price. You could easily buy 3-4 high end steel road bikes from the 80s-90s for less than a single entry level road bike.
In my garage right now I have 3 amazing steel road bikes from '85-'96. Two are hand built custom bikes (built for someone else obviously), one from italy, one from the US, and the last is a mass produced, but still very nice italian bike. I also have a modern entry level road bike. Between the three old steel bikes I've spent less than half of the money I spent on that entry level bike. Guess which ones get ridden more? In fact, the modern bike is my "rain" bike, that's how much I care about it.
And, if you buy an old bike and fix it up to spend the same amount of money, you end up with a truly bada** bike.
In conclusion: Buy the high end old bike. Take it to a shop and pay them $100-$150 to do a complete overhaul. That way you end up with a very nice bike that works well and you didn't have to work on. And you still end up spending less than half of a new bike.
My view is, if you are just looking to ride, today's mass produced sub $1,000 bike is very good indeed. It might not win you any bragging rights, nor will it be a valuable collectors item, but you will probably get 5 to 10 years or more enjoyment from it, maybe more.
#42
Senior Member
Join Date: Aug 2010
Location: Utah
Posts: 8,680
Bikes: Paletti,Pinarello Monviso,Duell Vienna,Giordana XL Super,Lemond Maillot Juane.& custom,PDG Paramount,Fuji Opus III,Davidson Impulse,Pashley Guv'nor,Evans,Fishlips,Y-Foil,Softride, Tetra Pro, CAAD8 Optimo,
Mentioned: 156 Post(s)
Tagged: 0 Thread(s)
Quoted: 2326 Post(s)
Liked 4,997 Times
in
1,780 Posts
You making me laugh out loud as well. Guess you better tell all the bicycle manufactures to go back to 126mm no need for 130mm, or maybe tell them just to make 130mm and that way the free wheel guys can just squeeze the rear drop outs to fit their 126mm and the guys using 135mm can re bend their drop outs to fit. Just think how much money they could save having to only make one size drop out spacing frame! Of course I think they are now making some 146mm spacing and those guys are going to be out of luck. I did state you could bend your 126mm to fit 130mm. Still doesn't do anything about the vintage parts being practically obsolete. By the time the OP who is on a small budget and seems to have very little wrenching experience, tries to update a vintage frame he will be dollars had to just go ahead and buy newer spec'd bicycle.
Freewheels are getting harder to find yet not really. The beauty of Ebay as well as some new folks stepping in to produce them for the market.
And it's really not hard to find quality old bikes for cheap locally in my experience.
$50 and all I did was replace the bars, retape, and put on new brake handles because I could. Even the old tires were fine but I put on my preferred ones.
$300 and totally stripped and serviced. I've done nothing to it but ride it. Oh, and new saddle but to me that's a given with any "new to you" bike.
$400 and new tape.
A couple of hundred and this thing is mint and has needed nothing. In fact I'm fixing to head out for 25 miles on this one.
$600 with fresh repaint and service. I dare any modern $1000 bike to ride as smooth as this baby.
It really isn't hard and high quality old rides in the $200-$300 range aren't nothing to find. Even with another $100-$200 to pay a LBS to completely go over it and you're still ahead of most $1000 modern rides.
And really, the maintenance isn't any different. Bikes are still bikes. In fact the young guys at my LBS always gush over my bikes and who get's to work on them. You better believe they get well taken care of.
In fact my 2015 Lynskey ti bike gives me nothing that these don't and I'm selling it. What a waste of good money for pretty much zero gain....
__________________
Steel is real...and comfy.
Steel is real...and comfy.
#43
Senior Member
Join Date: Nov 2006
Posts: 887
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 241 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
You should check old bicycle catalogs from the 80s.
You'll find plenty of nice machines of that era.
1985 Bridgestone Bicycle Catalogue
Miyata Bicycle Catalogs
https://www.flickr.com/photos/jamesb...7613538725170/
These bikes appear quite often on Craigslist.
Team-Miyata: img037.jpg (image)
Miyata 912: img040.jpg (image)
Miyata 1000: img043.jpg (image)
You'll find plenty of nice machines of that era.
1985 Bridgestone Bicycle Catalogue
Miyata Bicycle Catalogs
https://www.flickr.com/photos/jamesb...7613538725170/
These bikes appear quite often on Craigslist.
Team-Miyata: img037.jpg (image)
Miyata 912: img040.jpg (image)
Miyata 1000: img043.jpg (image)
Last edited by Barabaika; 05-20-17 at 12:36 PM.
#44
Senior Member
Join Date: Nov 2006
Posts: 887
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 241 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Vintage bicycles really can not be upgraded to modern cassette/ hub combination due to drop out widths. You can force fit a cassette/hub assembly into a 126mm width freewheel, but its no fun. You can get the rear drop outs re-bent and hopefully the will be re-bent straight. A lot of vintage bicycles do not have index shifting, which leaves you searching for the right gear.
Most cogs of a typical 11-speed cassette are not used. While you can easily use the big chain ring -> the big cog combination on a 6-speed freewheel; for some reason, it doesn't work on an 11-speed cassette, which costs 5 time more.
ENE BAR END CONTROL | DIA-COMPE
#45
Senior Member
Join Date: Aug 2009
Posts: 8,550
Bikes: Wilier Izoard XP (Record);Cinelli Xperience (Force);Specialized Allez (Rival);Bianchi Via Nirone 7 (Centaur); Colnago AC-R Disc;Colnago V1r Limited Edition;De Rosa King 3 Limited(Force 22);DeRosa Merak(Red):Pinarello Dogma 65.1 Hydro(Di2)
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 551 Post(s)
Liked 277 Times
in
145 Posts
No need for me to address the dropout thing with you as many others have already chimed in. Really not trying to be snarky with you but the fact is it's really a non-issue.
Freewheels are getting harder to find yet not really. The beauty of Ebay as well as some new folks stepping in to produce them for the market.
And it's really not hard to find quality old bikes for cheap locally in my experience.
$50 and all I did was replace the bars, retape, and put on new brake handles because I could. Even the old tires were fine but I put on my preferred ones.
$300 and totally stripped and serviced. I've done nothing to it but ride it. Oh, and new saddle but to me that's a given with any "new to you" bike.
$400 and new tape.
A couple of hundred and this thing is mint and has needed nothing. In fact I'm fixing to head out for 25 miles on this one.
$600 with fresh repaint and service. I dare any modern $1000 bike to ride as smooth as this baby.
It really isn't hard and high quality old rides in the $200-$300 range aren't nothing to find. Even with another $100-$200 to pay a LBS to completely go over it and you're still ahead of most $1000 modern rides.
And really, the maintenance isn't any different. Bikes are still bikes. In fact the young guys at my LBS always gush over my bikes and who get's to work on them. You better believe they get well taken care of.
In fact my 2015 Lynskey ti bike gives me nothing that these don't and I'm selling it. What a waste of good money for pretty much zero gain....
Freewheels are getting harder to find yet not really. The beauty of Ebay as well as some new folks stepping in to produce them for the market.
And it's really not hard to find quality old bikes for cheap locally in my experience.
$50 and all I did was replace the bars, retape, and put on new brake handles because I could. Even the old tires were fine but I put on my preferred ones.
$300 and totally stripped and serviced. I've done nothing to it but ride it. Oh, and new saddle but to me that's a given with any "new to you" bike.
$400 and new tape.
A couple of hundred and this thing is mint and has needed nothing. In fact I'm fixing to head out for 25 miles on this one.
$600 with fresh repaint and service. I dare any modern $1000 bike to ride as smooth as this baby.
It really isn't hard and high quality old rides in the $200-$300 range aren't nothing to find. Even with another $100-$200 to pay a LBS to completely go over it and you're still ahead of most $1000 modern rides.
And really, the maintenance isn't any different. Bikes are still bikes. In fact the young guys at my LBS always gush over my bikes and who get's to work on them. You better believe they get well taken care of.
In fact my 2015 Lynskey ti bike gives me nothing that these don't and I'm selling it. What a waste of good money for pretty much zero gain....
Those are some sexy bikes
#46
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,617
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10969 Post(s)
Liked 7,495 Times
in
4,191 Posts
Still doesn't do anything about the vintage parts being practically obsolete. By the time the OP who is on a small budget and seems to have very little wrenching experience, tries to update a vintage frame he will be dollars had to just go ahead and buy newer spec'd bicycle.
- full Tiagra groupset for $325. Thats STI, brake calipers, crank, bb, chain, and cassette.
- New wheels from velomine or nashbar for $130-250 depending on what you want. From $200 up you can get excellent hubs, rims, and butted spokes.
- New bar tape for $15.
- new cables and housing for $15-30.
$480ish to $560ish for 10sp with all new everything.
$200 for a shop to fully clean and set up the bike.
That leaves $300-400 to get a great frame and still be at the same price as the entry level modern bike.
You will have a bike with more character and higher quality components.
Or- if a bike from '87ish thru '99ish is used(and more modern too) that is a quality steel frame, you can just keep the brake calipers and the derailleurs to save.
Add some $95 Sora STIs, a $55 crankset, a $20 cassette, and $10 chain. Bartape and cables for $40. Then new wheels.
Thats $360-430. And if your bike is from the mid90s or newer, you wont need new wheels.
Seriously though, this isnt scrounging to piece stuff together- a high quality steel frame with all new Tiagra everything AND assempbled by a shop for less than a Sora and generic component spec'd retail bike.
Or a sora drivetrain and high quality wheelset and components for less than a new bike.
You say it isnt realistic and costly, but all this can also be done for hundreds less than thebscenarios i listed too.
#48
Senior Member
The reason that freewheels wobble is that the bearing/pawl system has wobble. Which also happens in freehubs. The deciding factor is mostly just how good they are; the vintage SunTour Winner freewheel on my '79 Fuji America is nearly perfectly straight and stable, and the low-end freehub on my Stumpjumper drop bar conversion wobbles half as bad as a Walmart bike freewheel.
Vintage bicycles really can not be upgraded to modern cassette/ hub combination due to drop out widths. You can force fit a cassette/hub assembly into a 126mm width freewheel, but its no fun. You can get the rear drop outs re-bent and hopefully the will be re-bent straight.
A lot of vintage bicycles do not have index shifting, which leaves you searching for the right gear.
I have one bike where the rear shifter can index the 7s cassette, but I keep it in friction mode just because it feels lighter.
Older style freewheels are getting harder to find
the older style stems are also getting harder to find.
In some setups it might "just work" if you shift like that, but it's probably not giving you optimal shift performance, and it's more trouble than it's worth to be counting those fine clicks.
Last edited by HTupolev; 05-20-17 at 04:54 PM.
#49
Senior Member
Join Date: Aug 2015
Posts: 136
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 60 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Freewheels on vintage bicycles all have a wiggle in them due to the thread pitch on to the hub and can not be fixed.
Vintage bicycles really can not be upgraded to modern cassette/ hub combination due to drop out widths. You can force fit a cassette/hub assembly into a 126mm width freewheel, but its no fun. You can get the rear drop outs re-bent and hopefully the will be re-bent straight. A lot of vintage bicycles do not have index shifting, which leaves you searching for the right gear.
Vintage bicycles are a lot like vintage cars. They are nice to own and look at and to take to shows and charity rides but not really practical to ride everyday if you have a choice. Older style freewheels are getting harder to find, the older style stems are also getting harder to find. It is hard to beat new technologies and the new standards.
I will also argue that a road bike IS faster than a hybrid, given the cyclist riding the road and hybrid are equal.
Vintage bicycles really can not be upgraded to modern cassette/ hub combination due to drop out widths. You can force fit a cassette/hub assembly into a 126mm width freewheel, but its no fun. You can get the rear drop outs re-bent and hopefully the will be re-bent straight. A lot of vintage bicycles do not have index shifting, which leaves you searching for the right gear.
Vintage bicycles are a lot like vintage cars. They are nice to own and look at and to take to shows and charity rides but not really practical to ride everyday if you have a choice. Older style freewheels are getting harder to find, the older style stems are also getting harder to find. It is hard to beat new technologies and the new standards.
I will also argue that a road bike IS faster than a hybrid, given the cyclist riding the road and hybrid are equal.
#50
Senior Member
Join Date: Nov 2006
Posts: 887
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 241 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
That's not how those work. Those are friction shifters, basically a copy of the old SunTour LD-1400 with a different lever design. The "clicks" are coming from a ratchet attached to a friction plate, and don't align in a consistent way to the cogs.
In some setups it might "just work" if you shift like that, but it's probably not giving you optimal shift performance, and it's more trouble than it's worth to be counting those fine clicks.
In some setups it might "just work" if you shift like that, but it's probably not giving you optimal shift performance, and it's more trouble than it's worth to be counting those fine clicks.
Two or three clicks, and you switch to the next cog.
It won't work well with a 10-speed cassette.
But I only use 4 gears on my everyday ride anyway.