I need a replacement hybrid frame
11-05-10 | 07:04 PM
#1
Thread Starter
Senior Member
Joined: Nov 2010
Posts: 52
Likes: 0
From: Rocklin, CA
Bikes: marin hybrid (broken), GMC Denali Pro Road Bike (new)
I need a replacement hybrid frame
i need one to fit my 700c35 wheels, and 18-19" frame. i'm going to out an octo crank set since square tapered been a pain. current bike is a Marin Lackspur.
Last edited by bloodhawke83; 11-05-10 at 07:59 PM.
11-06-10 | 09:39 AM
#2
Senior Member
Joined: Apr 2007
Posts: 4,129
Likes: 56
From: Munising, Michigan, USA
Bikes: Priority 600, Priority Continuum, Devinci Dexter
You can get a Civia Hyland frame for $250ish. Here's one in the 58mm size:
https://www.bikeman.com/FM2428.html?u...ign=GoogleBase
What's wrong w/your current frame? You're not replacing the frame just because of the crankset, are you?
https://www.bikeman.com/FM2428.html?u...ign=GoogleBase
What's wrong w/your current frame? You're not replacing the frame just because of the crankset, are you?
11-06-10 | 06:37 PM
#5
Banned
Joined: Mar 2004
Posts: 5,155
Likes: 5
From: Maryland
Bikes: rockhopper, delta V, cannondale H300, Marin Mill Valley
I broke a Marin Mill Valley frame which was not covered by warranty. Marin offered to replace the broken frame for $150 plus $20 for shipping. If this sounds reasonable to you, look into getting a replacement frame from Marin. A Larkspur replacement frame will probably cost less than my Mill Valley frame did.
Thread
Thread Starter
Forum
Replies
Last Post
Bevik
Long Distance Competition/Ultracycling, Randonneuring and Endurance Cycling
0
05-24-14 12:59 PM
