Noob question- What is the benefit of bar ends?
#1
Junior Member
Thread Starter
Join Date: Aug 2005
Posts: 14
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Noob question- What is the benefit of bar ends?
I have seen bar ends on mountain bikes. What is the benefit of using them when you ride.
#2
singletrackmamma
Join Date: Sep 2005
Location: Maine
Posts: 84
Bikes: 1992 trek 2300 carbon frame, 2001 cannondale jekyl 600
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by Average Jose
I have seen bar ends on mountain bikes. What is the benefit of using them when you ride.
The bar ends give another riding position for your comfort and are a tremendous use for the uphill dirt climb. I feel they are benefit to the mtn riding. They are a little expense for the pay off that they give!
#5
Junior Member
Join Date: Sep 2005
Posts: 7
Bikes: SCOTT G-ZERO FX 2005
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Why not on Riser bars? Another noob here with his first post too :-)
I just bought a scott G-Zero FX 2005 that has riser bars. I also bought some bar ends based on the fact I had them on 15 year old Raleigh Yukon and loved the hand position change as much as anything else.
Is there a technical reason for not adding to riser bars?
I just bought a scott G-Zero FX 2005 that has riser bars. I also bought some bar ends based on the fact I had them on 15 year old Raleigh Yukon and loved the hand position change as much as anything else.
Is there a technical reason for not adding to riser bars?
Last edited by chelton; 10-05-05 at 06:06 AM.
#6
Newbie
Join Date: Oct 2005
Location: N/A
Posts: 25
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
When you grab onto bars ends while climbing, you're applying torque through the handle bars to the bike which pushes the rear tire into the ground for better traction on steeps. I had them for several years until I decided they were more of a distraction than they were worth. The same effect can be achieved by rotating your hands forward on the bars, gripping down tightly, and then trying to twist the handle bars toward you to apply the same torque. If you do this as you approach a really steep climb and get low and forward on the bike (nose of the seat in your crack) you will be able to climb anything without needing bar ends.
#7
Senior Member
Join Date: Mar 2004
Location: Tasmania, Australia
Posts: 540
Bikes: GT3 trike,Viper chopper, electric assist Viper chopper,Electric moped(Vespa style)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I am also new to the MTB side of biking, but going on the trails I have ridden I would think they would be lethal, as there would be a real chance of getting them hooked in a branch or undergrowth which could prove a little more entertaining than I would like.
I had them on a road going MTB a couple of years ago and they were good for changing hand positions and body angle on longer rides.
I had them on a road going MTB a couple of years ago and they were good for changing hand positions and body angle on longer rides.
#8
Member
Join Date: May 2005
Location: Gijon, Spain
Posts: 41
Bikes: 2003 Kona Smoke, 2004 Fuji Touring, 2005 Brompton L3, 2008 Dahon MU XL Sport
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by chelton
Why not on Riser bars? Another noob here with his first post too :-)
I just bought a scott G-Zero FX 2005 that has riser bars. I also bought some bar ends based on the fact I had them on 15 year old Raleigh Yukon and loved the hand position change as much as anything else.
Is there a technical reason for not adding to riser bars?
I just bought a scott G-Zero FX 2005 that has riser bars. I also bought some bar ends based on the fact I had them on 15 year old Raleigh Yukon and loved the hand position change as much as anything else.
Is there a technical reason for not adding to riser bars?
#9
Custom User
Join Date: Jul 2005
Location: T0L0K0
Posts: 3,739
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I don't like bar ends; I find that they do not provide any benefits to me personally. I feel that I can climb better without them. Plus, I can't run them on the carbon bar I have on my bike.
The good thing is that they are cheap so get a pair and try them out...see if you like them and if they help your riding.
The good thing is that they are cheap so get a pair and try them out...see if you like them and if they help your riding.
#10
DNPAIMFB
Join Date: Aug 2005
Location: Cowtown, AB
Posts: 4,655
Bikes: Titus El Guapo, Misfit diSSent, Cervelo Soloist Carbon, Wabi Lightning, et al.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Barends turn your wrist so that your thumb is pointed up, this means that your radius and ulna are oriented so that the biceps muscle in your arm has greater mechanical advantage than it does when in the palm-down standard riding position. Hmmm. I should probably get some.
They don't usually show up on riser bars 'cause it looks kinda silly. Then again, riser bars are more about style than function. [stirs the pot...]
They don't usually show up on riser bars 'cause it looks kinda silly. Then again, riser bars are more about style than function. [stirs the pot...]
#11
I drink your MILKSHAKE
Join Date: Jul 2002
Location: St. Petersburg, FL
Posts: 15,061
Bikes: 2003 Specialized Rockhopper FSR Comp, 1999 Specialized Hardrock Comp FS, 1971 Schwinn Varsity
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Originally Posted by chelton
Why not on Riser bars? Another noob here with his first post too :-)
I just bought a scott G-Zero FX 2005 that has riser bars. I also bought some bar ends based on the fact I had them on 15 year old Raleigh Yukon and loved the hand position change as much as anything else.
Is there a technical reason for not adding to riser bars?
I just bought a scott G-Zero FX 2005 that has riser bars. I also bought some bar ends based on the fact I had them on 15 year old Raleigh Yukon and loved the hand position change as much as anything else.
Is there a technical reason for not adding to riser bars?
Originally Posted by FergusF
I have heard this before but could never figure out why. I too have bar ends on my riser bars & haven't had any problems with them.
Riser bars aren't designed to cope with the stresses produced by barends. They add to the leverage at the bends of the riser.
This is another reason why carbon riser bars don't reinforce the ends of risers to allow barends to be mounted.
That plus with many bar ends the angle is way off when mounted to a riser due to the greater sweep. Some companies have a pivot mount for their bar ends that allows for some tinkering, but the space allowed between the bar and the interior surface of the bar closes down reducing the effectivenss of one of the main postitions the bar end is there to provide.
If you want bar ends skip the riser and go to flat bar with a steeper stem to keep your ride height
Last edited by Raiyn; 10-07-05 at 01:23 AM.
#13
Montani Semper Liberi
Join Date: Oct 2005
Location: Southern WV
Posts: 248
Bikes: Specialized Hardrock
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Noob here (to the forum, not to riding). I live live in West Virginia, so it goes without saying that you are either going up a hill or down a hill. I use bar ends due to the amount of climbing I do (50% of every ride). I can climb better with them. YMMV.
#14
Old School Rad
Join Date: Sep 2004
Location: The old Mountains
Posts: 8,206
Bikes: Blur LT
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
They also work great to impale you in a crash.
__________________
Like a circus monkey on a stolen Harley......
Like a circus monkey on a stolen Harley......
#15
enjoy the ride
Join Date: Aug 2005
Location: Columbus, Ohio
Posts: 74
Bikes: The Ship of Theseus - the only bicycle that I own or have ever owned. It is a bike that I built, with a constantly shifting constellation of parts & frames.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
The only caveat I would note is that it is possible (sometimes quite easy) to snag a tree limb or a bush with bar ends.
On my first ride with them, I rode a narrow bit of single track that happens to have a few bits where you have to slalom between pairs of small trees. I snagged one of the trees, which stopped all of my forward momentum (instantly) and sent me off my bike.
Having said that, I still use bar ends, and find them to be a big help on steep/technical climbs. Just be careful.
On my first ride with them, I rode a narrow bit of single track that happens to have a few bits where you have to slalom between pairs of small trees. I snagged one of the trees, which stopped all of my forward momentum (instantly) and sent me off my bike.
Having said that, I still use bar ends, and find them to be a big help on steep/technical climbs. Just be careful.
#16
Senior Member
Join Date: Apr 2005
Location: Minneapolis, MN, USA
Posts: 1,152
Bikes: 1990 Burley Bossa Nova, 1992 Paramount PDG-70, 1993 Specialized Stumpjumper, 2005 Jamis Dakar XC Pro, 2007 Rivendell Bleriot
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 28 Post(s)
Likes: 0
Liked 5 Times
in
3 Posts
I used to use bar-ends on my old bike, but had the bars cut rather narrow.
I no longer use them on either my old or new bike, although i might put them back on for old-time's sake.. they're the old knurled aluminum Control Tech Stix I ones from the early '90s.
I no longer use them on either my old or new bike, although i might put them back on for old-time's sake.. they're the old knurled aluminum Control Tech Stix I ones from the early '90s.
#19
Middle-ground Communist
Join Date: Nov 2004
Location: Isle of Wight - UK
Posts: 484
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by mtnbiker66
They also work great to impale you in a crash.
#22
Newbie
Join Date: Oct 2005
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Jose,
Bar ends will be good for open single Ts, but may pose a problem for tight winding Single Ts...may grab a branch or a trunk of the tree!
JD
Bar ends will be good for open single Ts, but may pose a problem for tight winding Single Ts...may grab a branch or a trunk of the tree!
JD
#23
Senior Member
Join Date: Apr 2004
Location: Suburban Boston
Posts: 473
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I use Onza bar ends with a double bend. I usually only use the secondary hand positions on flat roads when I want to stretch out a bit. Mainly I put them on as I am new to mountain biking and I wanted something to protect my hands from tree trunks and they do that!
#24
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,380
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6227 Post(s)
Liked 4,230 Times
in
2,373 Posts
Originally Posted by pinkrobe
They don't usually show up on riser bars 'cause it looks kinda silly. Then again, riser bars are more about style than function. [stirs the pot...]
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#25
Colorado Trail Rider
Join Date: Nov 2004
Posts: 194
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Well, I know that are way out of fashion, but I have had bar ends on every mtn bike that I have since 1990, and yes, I have a set on my riser bars today.
I have a set of the Profile Boxers, purchased in the matte black finish, used some much, that finish is worn off in spots.
I use climbing, as it stretches me out, and keeps more weight over the front wheels. Long climbs as well as cleaning technical waterbars and rocks.
It is a personal preference kinda thing, like so many things in mtn biking, maker you own choice.
I have a set of the Profile Boxers, purchased in the matte black finish, used some much, that finish is worn off in spots.
I use climbing, as it stretches me out, and keeps more weight over the front wheels. Long climbs as well as cleaning technical waterbars and rocks.
It is a personal preference kinda thing, like so many things in mtn biking, maker you own choice.