2010 Zipp 404 Alloy/Carbon Clincher - fair value?
#1
Senior Member
Thread Starter
Join Date: Jun 2014
Location: Houston TX
Posts: 282
Bikes: 2018 Diamondback Podium Equipe Dura Ace Disc, 2013 Felt z85 (now a frankenbike,) 1994 Serotta Colorado TG, 1999 Lemond Buenos Aires, 2017 State Undefeated II Track Bike, 2005 Litespeed Tuscany project
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 29 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
2010 Zipp 404 Alloy/Carbon Clincher - fair value?
Looking for some opinions.
I can usually get a fairly good grasp on bike frame/part value by looking at comparable items for sale on ebay/craigslist/pinkbike/etc.
However, I'm having a nightmare of a time finding comps to a wheelset I'm looking into.
It's an older model 2010 set of Zipp 404s (NOT firecrests.) Its one of the last years they made them with an aluminum brake track bonded to carbon. They have a 10 speed hub, and it is not 11 speed compatible, would need a new hub and full rebuild to make them so. (that's ok for my purposes, I want them for a 10 speed build, but I figure it affects value.)
Firecrests 2012 and after are easy to find. These however, are not. I would assume they have a much lower value than all carbon firecrests, especially considering the hub issue.
The only pair on ebay has a powertap hub, and is on offer for 700. These don't have the powertap.
I was thinking maybe somewhere in the 400-500 range, but that's based on a couple I found on an Austrailian site, not a US site.
Am I too high? Too low? In the ballpark? Trying to come up with an offer that isn't insulting to the seller, but is also fair to my pocketbook.
I can usually get a fairly good grasp on bike frame/part value by looking at comparable items for sale on ebay/craigslist/pinkbike/etc.
However, I'm having a nightmare of a time finding comps to a wheelset I'm looking into.
It's an older model 2010 set of Zipp 404s (NOT firecrests.) Its one of the last years they made them with an aluminum brake track bonded to carbon. They have a 10 speed hub, and it is not 11 speed compatible, would need a new hub and full rebuild to make them so. (that's ok for my purposes, I want them for a 10 speed build, but I figure it affects value.)
Firecrests 2012 and after are easy to find. These however, are not. I would assume they have a much lower value than all carbon firecrests, especially considering the hub issue.
The only pair on ebay has a powertap hub, and is on offer for 700. These don't have the powertap.
I was thinking maybe somewhere in the 400-500 range, but that's based on a couple I found on an Austrailian site, not a US site.
Am I too high? Too low? In the ballpark? Trying to come up with an offer that isn't insulting to the seller, but is also fair to my pocketbook.
Likes For Mindcrime:
#2
Should Be More Popular
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,055
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Mentioned: 560 Post(s)
Tagged: 2 Thread(s)
Quoted: 22599 Post(s)
Liked 8,926 Times
in
4,159 Posts
#3
Senior Member
keep an eye on the front hub on any of the older Zipp Wheels, go to the Zipp website for the recalled hub details. I still see wheels with the recalled hubs coming up on Ebay.
If you can spring the extra cash try to get a pair firecrest they are so much stiffer.
If you can spring the extra cash try to get a pair firecrest they are so much stiffer.
#7
Senior Member
Join Date: Dec 2012
Posts: 1,163
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 344 Post(s)
Likes: 0
Liked 20 Times
in
18 Posts
Yeah, that's close enough. Mine weigh 1570 grams. But, I see a lot of full carbon clinchers just barley under 1500 grams with most over 1500. So, is it worth spending $$ just to save less than 100 grams for a nice set of 50mm carbon clinchers as opposed to the 404s with alloy brake tracks?
FYI: I have both, 2010 Zipp 404 and a set of 2017 China Bomb 50mm full carbon clinchers that I built up to 1475 grams from FarSports.
FYI: I have both, 2010 Zipp 404 and a set of 2017 China Bomb 50mm full carbon clinchers that I built up to 1475 grams from FarSports.
#9
Senior Member
Thread Starter
Join Date: Jun 2014
Location: Houston TX
Posts: 282
Bikes: 2018 Diamondback Podium Equipe Dura Ace Disc, 2013 Felt z85 (now a frankenbike,) 1994 Serotta Colorado TG, 1999 Lemond Buenos Aires, 2017 State Undefeated II Track Bike, 2005 Litespeed Tuscany project
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 29 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
We have a result. I have acquired them for $300. They are in pristine shape, have less than 2000 miles. They will look awesome on my classic 90s steel serotta build. Thanks everyone.
Likes For Mindcrime:
Thread
Thread Starter
Forum
Replies
Last Post
bargainguy
Classic and Vintage Bicycles: Whats it Worth? Appraisals.
7
07-07-19 10:05 AM
mikehighlife
Classic and Vintage Bicycles: Whats it Worth? Appraisals.
0
06-09-13 03:06 PM
BG2
Classic and Vintage Bicycles: Whats it Worth? Appraisals.
11
01-28-12 01:16 AM
Bustedlink
Classic and Vintage Bicycles: Whats it Worth? Appraisals.
1
11-18-10 11:12 AM