Go Back  Bike Forums > Bike Forums > Road Cycling
Reload this Page >

Click's are driving me nuts

Search
Notices
Road Cycling “It is by riding a bicycle that you learn the contours of a country best, since you have to sweat up the hills and coast down them. Thus you remember them as they actually are, while in a motor car only a high hill impresses you, and you have no such accurate remembrance of country you have driven through as you gain by riding a bicycle.” -- Ernest Hemingway

Click's are driving me nuts

Thread Tools
 
Search this Thread
 
Old 08-02-08 | 03:00 PM
  #1  
bikerboy869's Avatar
Thread Starter
94 Trek 1400
 
Joined: May 2005
Posts: 260
Likes: 0
From: Chi Town baby!

Bikes: Mountainsmith Mountain bike and a Trek 1400.

Click's are driving me nuts

Hello everybody. After a quick and hard ride today I felt the need to post. I have had a click going on that got exponentially worse today. It started only when I would put "digging" force on the right pedal i.e. going up a slight incline, pushing at a stop etc. It was nothing much and never got worse and actually for a while went away. Well, today it was bad. It was to the point where both pedals (which has never happened) started going for it. Always when there was down force being applied. The only way I was able to stop it was by almost eliminating my down force and only pulling the pedals up. Sure it was quiet but not so easy to do. I went through Sheldon's articles and did some tests and nothing really seemed to match. I think it may be the BB but I thought I would see what you all thought. Any ideas or thoughts throw them my way! Thanks!
bikerboy869 is offline  
Reply
Old 08-02-08 | 03:07 PM
  #2  
Allegheny Jet's Avatar
Senior Member
 
Joined: Oct 2007
Posts: 5,804
Likes: 1
From: Medina, OH

Bikes: confidential infromation that I don't even share with my wife

I recently had a problem with creaking everytime I got out of the saddle. Greasing the front skewer took care of it. The noise seemed to be coming from my head set. Check your skewer. Also, try a drop of oil on the chain ring bolts or even tighten them.
Allegheny Jet is offline  
Reply
Old 08-02-08 | 03:08 PM
  #3  
mollusk's Avatar
Elite Fred
20 Anniversary
 
Joined: Aug 2005
Posts: 10,953
Likes: 44
From: Edge City

Bikes: 2009 Spooky (cracked frame), 2006 Curtlo, 2002 Lemond (current race bike) Zurich, 1987 Serotta Colorado, 1986 Cannondale for commuting, a 1984 Cannondale on loan to my son

It could be so many things.

It could be as easy as needing to tighten a front or back quick release a little more. (Check them first!)

If that doesn't work, ping the group again.
mollusk is offline  
Reply
Old 08-02-08 | 03:35 PM
  #4  
Banned.
 
Joined: Sep 2007
Posts: 1,765
Likes: 0
From: Hammerland
iPod up - no more clicks.
CharlieWoo is offline  
Reply
Old 08-02-08 | 04:12 PM
  #5  
Nachoman's Avatar
well hello there
20 Anniversary
 
Joined: May 2005
Posts: 15,486
Likes: 387
From: Point Loma, CA

Bikes: Bill Holland (Road-Ti), Fuji Roubaix Pro (back-up), Bike Friday (folder), Co-Motion (tandem) & Trek 750 (hybrid)

Originally Posted by CharlieWoo
iPod up - no more clicks.
So true. And if you can still hear the clicking with the ear phones in, just turn up the volume.
__________________
.
.

Two wheels good. Four wheels bad.
Nachoman is offline  
Reply
Old 08-02-08 | 04:39 PM
  #6  
bikerboy869's Avatar
Thread Starter
94 Trek 1400
 
Joined: May 2005
Posts: 260
Likes: 0
From: Chi Town baby!

Bikes: Mountainsmith Mountain bike and a Trek 1400.

HAHA I love the ipod idea... infact I just saw in the Nashbar magazine an ipod/cell phone hookup for handlebars! Safety first right??
bikerboy869 is offline  
Reply
Old 08-02-08 | 05:14 PM
  #7  
Banned.
 
Joined: May 2004
Posts: 508
Likes: 0
From: Orange County, California
Try making sure your crank arms are tight. Ever so slightly loose cranks can cause a creak.
The Carpenter is offline  
Reply
Old 08-02-08 | 05:36 PM
  #8  
Hickeydog's Avatar
Crushing souls
 
Joined: Jun 2007
Posts: 1,591
Likes: 1
From: Sagamore Hills, Ohio.

Bikes: Trek 1500

Try tightening the pedals.
__________________
Originally Posted by Wordbiker

What's frightening is how coherent Hickey was in posting that.
Hickeydog is offline  
Reply
Old 08-02-08 | 05:37 PM
  #9  
sp00ki's Avatar
partly metal, partly real
 
Joined: Aug 2005
Posts: 3,597
Likes: 0
From: Philadelphia.

Bikes: Hummer H2

i bet this has something to do with your pedals and cleats interfacing.
sp00ki is offline  
Reply
Old 08-02-08 | 05:39 PM
  #10  
Rober's Avatar
Senior Member
 
Joined: Jan 2008
Posts: 389
Likes: 0
From: Salt Lake City

Bikes: 1986 Univega Grand Touring; 1983 Puch A/D Pacifica; 2006 LeMond Sarthe

Its a crank torque problem. Use the search for this forum. There was a very useful thread about exactly this problem - and the solution to it.
Rober is offline  
Reply
Old 08-02-08 | 06:29 PM
  #11  
Homebrew01's Avatar
Super Moderator
20 Anniversary
 
Joined: Jul 2004
Posts: 21,978
Likes: 1,153
From: Ffld Cnty Connecticut

Bikes: Old Steelies I made, Old Cannondales

Originally Posted by Nachoman
So true. And if you can still hear the clicking with the ear phones in, just turn up the volume.
Same answer the Car Talk guys give !!
__________________
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.

FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
Homebrew01 is offline  
Reply
Old 08-02-08 | 06:46 PM
  #12  
Senior Member
 
Joined: May 2008
Posts: 566
Likes: 0
From: Berkeley, CA

Bikes: Specialized Allez Elite, BMC SLC01

Originally Posted by Homebrew01
Same answer the Car Talk guys give !!
If they were real car guys, they'd just roll down the windows and downshift a gear or two.
erliuic is offline  
Reply
Old 08-02-08 | 06:50 PM
  #13  
Spreggy's Avatar
King of the Plukers
15 Anniversary
 
Joined: May 2007
Posts: 895
Likes: 9
From: Rochester, NY
Had that one several times, first it was loose pedals. Months later it was worn out pedals.
Spreggy is offline  
Reply
Old 08-02-08 | 09:55 PM
  #14  
bikerboy869's Avatar
Thread Starter
94 Trek 1400
 
Joined: May 2005
Posts: 260
Likes: 0
From: Chi Town baby!

Bikes: Mountainsmith Mountain bike and a Trek 1400.

I did do a search and it led me to Sheldon's page. I searched there and like I said came up with nothing. Maybe I just did not search the for the right thing. Rober, the link would have been nice :/
As for pedals, they are only about 2 years old. They still look pretty good so I would hope that is not the problem. I will double check the crank arms and their tightness though, Thanks for that!!
bikerboy869 is offline  
Reply
Old 08-02-08 | 09:57 PM
  #15  
Rober's Avatar
Senior Member
 
Joined: Jan 2008
Posts: 389
Likes: 0
From: Salt Lake City

Bikes: 1986 Univega Grand Touring; 1983 Puch A/D Pacifica; 2006 LeMond Sarthe

Originally Posted by bikerboy869
I did do a search and it led me to Sheldon's page. I searched there and like I said came up with nothing. Maybe I just did not search the for the right thing. Rober, the link would have been nice :/
As for pedals, they are only about 2 years old. They still look pretty good so I would hope that is not the problem. I will double check the crank arms and their tightness though, Thanks for that!!
Wish I could have been of more help.
Rober is offline  
Reply
Old 08-03-08 | 10:51 AM
  #16  
rusto's Avatar
Corrosive Attitude
 
Joined: Aug 2007
Posts: 207
Likes: 0
From: Maynard, MA

Bikes: 2007 LeMond Alpe D'Huez

I suffered with a click/creak problem on my new bike ever since I got it two weeks ago... until today. I had taken it back to the LBS where I purchased it, having told them of the noise which I assumed was coming from the BB. This I determined by still getting the noise while pedaling even with the chain removed. They also adjusted the (expected) stretched cables and tuned the derailleurs. Got it back yesterday and still, same noise.

So, after today's ride, I took off the chain again then swapped out the pedals (Look Keo Sprints) with some Shimano SPD pedals from my MTB. No more noise!

Put chain back on and pumped around the block... no noise!

Put the Sprints back on... NOISE!

So, I got out the allen wrench and increased the release tension on the pedals about 5 clicks and that cured it!
rusto is offline  
Reply
Old 08-03-08 | 11:55 AM
  #17  
cccorlew's Avatar
Erect member since 1953
 
Joined: Dec 2006
Posts: 7,000
Likes: 38
From: Antioch, CA (SF Bay Area)

Bikes: Trek 520 Grando, Roubaix Expert, Motobecane Ti Century Elite turned commuter, Some old French thing gone fixie

This stuff makes everyone nuts. And it's almost impossible to hear the true source.

I had clicks from the rear. Tried everything. I mean everything. Turned out it was teh headset spacer. I greased up and it's all better. But it took forever to track down.

Good luck.
cccorlew is offline  
Reply
Old 08-03-08 | 02:27 PM
  #18  
bikerboy869's Avatar
Thread Starter
94 Trek 1400
 
Joined: May 2005
Posts: 260
Likes: 0
From: Chi Town baby!

Bikes: Mountainsmith Mountain bike and a Trek 1400.

THANK GOD FOR YOU GUYS!!! I went to my new favorite LBS and picked up a GIANT brand wrench and puller for a whole $16 bucks. Came home, unscrewed and tightened both crank bolts and I'll be damned if there is not a single little click or squeak out of the darn bike! They only noise I hear are my tires running against the street. I tried mashing, pushing everything that used to make the noise and it feels solid as a rock. Thank you all for your help!! YOU GUYS ROCK!!!
bikerboy869 is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.