![]() |
Cleave - Thanks. :) That was right after the build and I was still tweaking the fit. I did rotate the bars up a tad.
|
Originally Posted by ravenmore
(Post 11884712)
I thought I posted this bike in the thread but did a quick search and didn't see it. If it is a repeat I apologize. This came up in a BD thread thought it'd be fun to show what you can do with a BD bike. Note the cranks. :)
http://img.photobucket.com/albums/v7...f/IMG_0371.jpg http://img.photobucket.com/albums/v7...f/IMG_0363.jpg |
^nice bike
|
Bike I've been building for a while:
http://img.photobucket.com/albums/v6...keSaturday.jpg I'm still playing with fit. |
|
Originally Posted by x43x
(Post 11915929)
My wife bought her first road bike last year after a few years on a hybrid. This year I surprised her with a new wheelset. Added some light tires and dropped nearly 2 lbs from stock weight.
http://i2.photobucket.com/albums/y1/...s/Orbea1-1.jpg http://i2.photobucket.com/albums/y1/...s/Orbea2-1.jpg |
Ok here's bike Number 2 for me, #1 and #3 to come later..
http://i1042.photobucket.com/albums/...l/DSC08672.jpg |
Originally Posted by Juan Torres
(Post 11926961)
Ok here's bike Number 2 for me, #1 and #3 to come later..
http://i1042.photobucket.com/albums/...l/DSC08672.jpg |
Originally Posted by javal
(Post 11926834)
Very hot! But, isnt saddle a bit low (or rather, bar a bit high?).
|
Originally Posted by Juan Torres
(Post 11926961)
Ok here's bike Number 2 for me, #1 and #3 to come later..
http://i1042.photobucket.com/albums/...l/DSC08672.jpg So bizzare to do that to a set of Aksiums but props for following through |
Yes i did and let me tell you IT SUCKED! The powder was acatone based and "brushed on" then baked at 325 for 5 min.I chose P/C because it is felxable and very hard to chip.it will get me by till i get the SL's..
|
Originally Posted by Juan Torres
(Post 11928335)
Yes i did and let me tell you IT SUCKED! The powder was acatone based and "brushed on" then baked at 325 for 5 min.I chose P/C because it is felxable and very hard to chip.it will get me by till i get the SL's..
|
Few new parts..Reynolds strikes, Ti seatpost, 3T carbon stem, FSA winged handlebars, Elite carbon cage and the all important Red anodized 5mm spacer :D
http://i90.photobucket.com/albums/k277/883elder/011.jpg |
Here's #2 for me a Carbon Motobecane Immortal Force
http://i1042.photobucket.com/albums/...e/DSC08609.jpg http://i1042.photobucket.com/albums/...e/DSC08596.jpg |
1 Attachment(s)
Here's one of two (the other one is currently too dirty for pics :o).
http://bikeforums.net/attachment.php...hmentid=182151 |
Originally Posted by x43x
(Post 11927611)
Well my wife is 5'1", and I wasn't crazy about the fit that the lbs gave her when she bought the bike. I wasn't there unfortunately so I could only go by what was said over the phone. When I got home I thought the frame was a bit too large for her, but she seemed comfortable on it, and rode 2k miles her first year which I thought was pretty good. We did some tweaks but are going to get a pro fit done next month. Hopefully they will be able to dial it in better. I just hope he doesn't recommend a smaller frame!
|
Originally Posted by alexvpaq
(Post 11928433)
well let me tell you, it may have sucked but it looks nice
|
Originally Posted by WHOOOSSHHH...
(Post 11928642)
Few new parts..Reynolds strikes, Ti seatpost, 3T carbon stem, FSA winged handlebars, Elite carbon cage and the all important Red anodized 5mm spacer :D
http://i90.photobucket.com/albums/k277/883elder/011.jpg |
the new whip...Super six on the way too...pics to come.
http://i9.photobucket.com/albums/a99...6/PC100512.jpg |
hot.
|
Hot
(nice bike Crash) |
|
Originally Posted by x43x
(Post 11915929)
My wife bought her first road bike last year after a few years on a hybrid. This year I surprised her with a new wheelset. Added some light tires and dropped nearly 2 lbs from stock weight.
http://i2.photobucket.com/albums/y1/...s/Orbea1-1.jpg http://i2.photobucket.com/albums/y1/...s/Orbea2-1.jpg |
|
Orbea's hawt; Trek has a dork disc and wheel reflectors.
|
| All times are GMT -6. The time now is 07:32 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.