Jeremy_S

Ok, I'm ready for my abuse. 15 Fuji Altamira, full ultegra, carbon bars and seat post, selle italia flite carbon, and I figured I'd give tokyowheels a shot with their 1 year happiness guarantee and threw their 38mm carbon clinchers on. Bike weighs 16-4 ready to roll. Not a lightweight by any means but it's smooth and works very well for me.

Zurich

pdedes

multiple failures

pdedes

it needs better handlebars. those look they came out of a satanic noodle extruder

Jeremy_S

Bahahahaha. Points for creativity. I'm not sold on them either. Love them riding in the drops but in the hoods I'm not comfortable. Probably gonna go to a compact 75mm reach 120mm drop bar next and see how I like them. Everything else feels pretty good on it.

kbarch

The stripey spacers may be un-hot, but I kinda like 'em.

kcollier5

failure of a post. If you want to say not, at least say why you think it's a not. Or otherwise it's completely unproductive.

kcollier5

To me this is a not, and probably couldn't ever be a Hot because the frame isn't hot. Sorry, it's simply not an exciting frame to me so although I like your wheels and your bars (spacers not so much, wow) it's never going to be a hot bike to me, sorry.

kcollier5

Agree with pdedes, the bars are pretty awful, but otherwise it's hot. Well, I'd debadge those wheels. Unless Tokyo wheels is paying you? That doesn't increase their impressiveness... it kinda screams 'cheap Chinese wheel'. But great potential for hotness!

merlinextraligh

What brand wheels are those?

TenSpeedV2

I kind of like this. The spacers are too much, and not a huge fan of white bar tape, but that aside, this is a pretty cool looking bike. Bonus for not being an every day run of the mill Specialized or Trek.

SpeshulEd 

You haven't been hanging around in this thread long enough if you can't tell what the failures are.

Let's start with the 50mm spacer stack...then don't forget the chain on the wrong rings, the cranks in the wrong position, the bottle in the cage, wheels unaligned. One could even question the position of the quick release levers (at least the front) if they wanted to be picky.

This is the "improved" thread where position of parts has been deemed important. The bike has to be on-point, or else you're going to end up with comments like "multiple failures".

kcollier5

Never said I couldn't tell what the failures are. But the failures that you note may be a bit different than the failures that I note. Some are universal, but either way to simply say 'multiple failures' is at best lazy and at worst, arrogant. But if you take 30 more seconds to comment on the actual failures, you may help someone on here who isn't aware of every little considered failure. Plus, it's far more interesting reading... 'Multiple failures' doesn't really add to the discussion, that's all I was pointing out.

Jeremy_S

I agree with you guys, I've been looking for another set of bars, I want 42cm, 75 reach and 120 drop but I can't find any locally. I had another set of aluminum bars laying around that are 42/80/130 so I swapped them out today and took the stickers off the wheels, to give round 2 a try hahaha. I didn't want to take the stickers off just because it's a royal PITA but I agree with you, it looks better.

dtrain

better

SpeshulEd 

Hands down! Definitely better.

kcollier5

Absolutely! Looks great, that's a hot bike.

Csdhlhcky

WHEW!

Jeremy_S

Ok it's done. I'm a sucker for a sale, performance had the Reynolds 46mm clinchers 20% off yesterday and I had a decent amount of points because I haven't been using them for a good while so I snagged a set and moved the tokyowheel carbon wheels to my podium 5. I cannot complain about the Tokyowheel clinchers at all but these Reynolds wheels are NICE. Also found a set of zipp service course bars that were within 5mm of my "ideal" bar (just a guess I had made judging feel of off the 5 other bars I've tried that didn't make the cut) so I took a shot since the bike shop knows me really well and if I hated them I could return them no questions asked and I love them so far. So now this bike is officially done and exactly how I want it for at least 10,000 miles so my wallet should be happier until 2017.



Now I actually look at it myself and think "that's a hot bike".

90% of the aesthetic cues came from reading this harsh yet entertaining thread from beginning to end one night at work.

DCwheeler

Here's my new GIANT TCR SLR Aluxx (2014) - With other wheels it weighs 16.9lbs.

69chevy

arben

If a (more) neutral background is desired:

pdedes

level your seat. otherwise, acceptable

Jeremy_S

Love the giant, I'd probably go to black cages/seat/tape because I just love all black (my podium is as black as they get) but great looking bike to me.

The cannondale is just ridiculous, I'd probably put some carbon cages on it just for a touch more bling but still love it.

Like the trek on zipps too.

YoEdgar

2013 Jamis Icon Pro
I bought it new at the end of 2013. It has been a great bike to ride.