Addiction 2024.2
#1501
Klaatu..Verata..Necktie?
Join Date: May 2007
Location: SF Bay Area
Posts: 18,391
Bikes: Litespeed Ultimate, Ultegra; Canyon Endurace, 105; Battaglin MAX, Chorus; Bianchi 928 Veloce; Ritchey Road Logic, Dura Ace; Cannondale R500 RX100; Schwinn Circuit, Sante; Lotus Supreme, Dura Ace
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 10642 Post(s)
Liked 12,297 Times
in
6,296 Posts
#1502
cowboy, steel horse, etc
Join Date: Sep 2008
Location: The hot spot.
Posts: 45,244
Bikes: everywhere
Mentioned: 74 Post(s)
Tagged: 1 Thread(s)
Quoted: 13020 Post(s)
Liked 7,945 Times
in
4,225 Posts
In other bike tool news, I found a shock pump in the van!
I was pretty sure I'd grabbed one at some point but it wasn't in the bike toolbox so I thought I was SOL for a little while.
Looking forward to ride again, the ass end of the Ellsworth was sitting at about 70% sag on my last outing.
I was pretty sure I'd grabbed one at some point but it wasn't in the bike toolbox so I thought I was SOL for a little while.
Looking forward to ride again, the ass end of the Ellsworth was sitting at about 70% sag on my last outing.
Likes For LesterOfPuppets:
#1503
Should Be More Popular
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,258
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Mentioned: 561 Post(s)
Tagged: 2 Thread(s)
Quoted: 22762 Post(s)
Liked 9,157 Times
in
4,248 Posts
Ride was good. Luckily, 5 of the riders took a different route so the rest of us were mostly cohesive. I still had to break us into two a few times on busy roads, but it was all good.
I dropped the Saturn off at the shop before the ride for what may be its last oil change. I mentioned the shudder and they checked some codes and told me likely suspect is EGR valve but would cost some $$$$ to run the full diagnostic. Since the car is working reasonably well and will not pass next inspection at end of the year, I chose to skip that for now.
I dropped the Saturn off at the shop before the ride for what may be its last oil change. I mentioned the shudder and they checked some codes and told me likely suspect is EGR valve but would cost some $$$$ to run the full diagnostic. Since the car is working reasonably well and will not pass next inspection at end of the year, I chose to skip that for now.
#1504
Senior Member
Join Date: Sep 2005
Location: In the foothills of Los Angeles County
Posts: 25,567
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 8442 Post(s)
Liked 9,392 Times
in
4,615 Posts
Ride was good. Luckily, 5 of the riders took a different route so the rest of us were mostly cohesive. I still had to break us into two a few times on busy roads, but it was all good.
I dropped the Saturn off at the shop before the ride for what may be its last oil change. I mentioned the shudder and they checked some codes and told me likely suspect is EGR valve but would cost some $$$$ to run the full diagnostic. Since the car is working reasonably well and will not pass next inspection at end of the year, I chose to skip that for now.
I dropped the Saturn off at the shop before the ride for what may be its last oil change. I mentioned the shudder and they checked some codes and told me likely suspect is EGR valve but would cost some $$$$ to run the full diagnostic. Since the car is working reasonably well and will not pass next inspection at end of the year, I chose to skip that for now.
If it does the only way it could affect the idle is if it is stuck open. If it's stuck open either there is a piece of carbon lodged in the pintle or carbon has built up on the pintle preventing it from closing. Take it off and look at it. You might need a new gasket if you do.
If it has failed closed or will not operate it will have no affect on the idle.
Also, just because it has an EGR code doesn't necessarily mean there is something currently wrong with the EGR. Nor does it mean the EGR is the cause of your issue. It's pretty simple to remove the valve, though.
1994-1999 Saturn SW2 EGR Valve - Standard Motor Products EGV544T - - PartsGeek.com
#1505
Should Be More Popular
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,258
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Mentioned: 561 Post(s)
Tagged: 2 Thread(s)
Quoted: 22762 Post(s)
Liked 9,157 Times
in
4,248 Posts
Does it have an EGR valve like this?
If it does the only way it could affect the idle is if it is stuck open. If it's stuck open either there is a piece of carbon lodged in the pintle or carbon has built up on the pintle preventing it from closing. Take it off and look at it. You might need a new gasket if you do.
If it has failed closed or will not operate it will have no affect on the idle.
Also, just because it has an EGR code doesn't necessarily mean there is something currently wrong with the EGR. Nor does it mean the EGR is the cause of your issue. It's pretty simple to remove the valve, though.
1994-1999 Saturn SW2 EGR Valve - Standard Motor Products EGV544T - - PartsGeek.com
If it does the only way it could affect the idle is if it is stuck open. If it's stuck open either there is a piece of carbon lodged in the pintle or carbon has built up on the pintle preventing it from closing. Take it off and look at it. You might need a new gasket if you do.
If it has failed closed or will not operate it will have no affect on the idle.
Also, just because it has an EGR code doesn't necessarily mean there is something currently wrong with the EGR. Nor does it mean the EGR is the cause of your issue. It's pretty simple to remove the valve, though.
1994-1999 Saturn SW2 EGR Valve - Standard Motor Products EGV544T - - PartsGeek.com
#1506
Senior Member
Join Date: Sep 2005
Location: In the foothills of Los Angeles County
Posts: 25,567
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 8442 Post(s)
Liked 9,392 Times
in
4,615 Posts
Likes For big john:
#1507
Should Be More Popular
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,258
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Mentioned: 561 Post(s)
Tagged: 2 Thread(s)
Quoted: 22762 Post(s)
Liked 9,157 Times
in
4,248 Posts
Understood and agree. For humans.
For the Saturn, retirement = death. It may be an organ donor, but now that Saturn forums is kaput idk how to find a recipient.
For the Saturn, retirement = death. It may be an organ donor, but now that Saturn forums is kaput idk how to find a recipient.
#1508
VFL For Life
Join Date: Feb 2005
Location: Knoxville, TN
Posts: 51,626
Bikes: Velo Volmobile
Mentioned: 781 Post(s)
Tagged: 2 Thread(s)
Quoted: 28970 Post(s)
Liked 1,934 Times
in
1,362 Posts
Likes For gnome:
#1510
Should Be More Popular
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,258
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Mentioned: 561 Post(s)
Tagged: 2 Thread(s)
Quoted: 22762 Post(s)
Liked 9,157 Times
in
4,248 Posts
#1511
Senior Member
Join Date: May 2016
Location: Yucatán. México
Posts: 6,522
Bikes: 79 Trek 930 is back on the road, 80 Trek 414, 84 Schwinn Letour Luxe,87 Schwinn Prelude, 92 Schwinn Paramount PDG 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3327 Post(s)
Liked 1,935 Times
in
1,217 Posts
Originally Posted by datlas;[url=tel:23222748
23222748[/url]]I think it looks kinda like that. I actually took it out and cleaned it with heavy duty solvent about 12 years ago but my memory is not perfect. I am not gonna mess with anything unless the shuddering gets worse. Car will be retired at end of year regardless.
#1512
Senior Member
Join Date: May 2016
Location: Yucatán. México
Posts: 6,522
Bikes: 79 Trek 930 is back on the road, 80 Trek 414, 84 Schwinn Letour Luxe,87 Schwinn Prelude, 92 Schwinn Paramount PDG 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3327 Post(s)
Liked 1,935 Times
in
1,217 Posts
Originally Posted by datlas;[url=tel:23222874
23222874[/url]]Turns out the stock lug wrench supplied with the Fit is a piece of crap. The lug nuts are gorilla tight and the wrench won’t engage well enough to let me stand on the end for leverage. Had to call AAA.
#flatssuck
#flatssuck
#1513
Silver Comet Fred
Join Date: Jan 2017
Location: NW Metro Atl.
Posts: 12,264
Bikes: 1
Mentioned: 146 Post(s)
Tagged: 2 Thread(s)
Quoted: 8974 Post(s)
Liked 3,145 Times
in
1,806 Posts
Happy administrative professional day to all those who observe.
#1514
Silver Comet Fred
Join Date: Jan 2017
Location: NW Metro Atl.
Posts: 12,264
Bikes: 1
Mentioned: 146 Post(s)
Tagged: 2 Thread(s)
Quoted: 8974 Post(s)
Liked 3,145 Times
in
1,806 Posts
#1515
Silver Comet Fred
Join Date: Jan 2017
Location: NW Metro Atl.
Posts: 12,264
Bikes: 1
Mentioned: 146 Post(s)
Tagged: 2 Thread(s)
Quoted: 8974 Post(s)
Liked 3,145 Times
in
1,806 Posts
Roscoe update.
His bloodwork came back age appropriate for kidney function. Heart is good. The vet is perplexed why he is consuming so much water. For now monitor and report back in a month for chest and abdomen x ray if condition remains the same. Sooner if it worsens. So far it sounds like we limit his water to about 24 ounces/day and we've dodged a bullet for now. He's 14 and I'm grateful for every day.
His bloodwork came back age appropriate for kidney function. Heart is good. The vet is perplexed why he is consuming so much water. For now monitor and report back in a month for chest and abdomen x ray if condition remains the same. Sooner if it worsens. So far it sounds like we limit his water to about 24 ounces/day and we've dodged a bullet for now. He's 14 and I'm grateful for every day.
#1516
cowboy, steel horse, etc
Join Date: Sep 2008
Location: The hot spot.
Posts: 45,244
Bikes: everywhere
Mentioned: 74 Post(s)
Tagged: 1 Thread(s)
Quoted: 13020 Post(s)
Liked 7,945 Times
in
4,225 Posts
That's the per person rate.
If you have a group of cyclists, you're better off packing into LesterOfPuppets ' van.
If you have a group of cyclists, you're better off packing into LesterOfPuppets ' van.
#totalripoff
#1517
cowboy, steel horse, etc
Join Date: Sep 2008
Location: The hot spot.
Posts: 45,244
Bikes: everywhere
Mentioned: 74 Post(s)
Tagged: 1 Thread(s)
Quoted: 13020 Post(s)
Liked 7,945 Times
in
4,225 Posts
Likes For LesterOfPuppets:
#1518
Silver Comet Fred
Join Date: Jan 2017
Location: NW Metro Atl.
Posts: 12,264
Bikes: 1
Mentioned: 146 Post(s)
Tagged: 2 Thread(s)
Quoted: 8974 Post(s)
Liked 3,145 Times
in
1,806 Posts
My buddy. Waiting for grandma to come home.
#1519
Silver Comet Fred
Join Date: Jan 2017
Location: NW Metro Atl.
Posts: 12,264
Bikes: 1
Mentioned: 146 Post(s)
Tagged: 2 Thread(s)
Quoted: 8974 Post(s)
Liked 3,145 Times
in
1,806 Posts
The roses popped right as we had our first showings.
#1520
Not actually Tmonk
Join Date: Jun 2007
Location: San Diego, CA
Posts: 14,416
Bikes: road, track, mtb
Mentioned: 142 Post(s)
Tagged: 0 Thread(s)
Quoted: 2806 Post(s)
Liked 3,410 Times
in
1,784 Posts
great timing!
__________________
"Your beauty is an aeroplane;
so high, my heart cannot bear the strain." -A.C. Jobim, Triste
"Your beauty is an aeroplane;
so high, my heart cannot bear the strain." -A.C. Jobim, Triste
Likes For TMonk:
#1521
So it is
Join Date: Sep 2008
Location: Westminster, CO
Posts: 21,485
Bikes: Luzerne, 684, Boreas, Wheelhouse, Alize©®, Bayamo, Cayo
Mentioned: 247 Post(s)
Tagged: 1 Thread(s)
Quoted: 11496 Post(s)
Liked 4,899 Times
in
2,835 Posts
Roscoe update.
His bloodwork came back age appropriate for kidney function. Heart is good. The vet is perplexed why he is consuming so much water. For now monitor and report back in a month for chest and abdomen x ray if condition remains the same. Sooner if it worsens. So far it sounds like we limit his water to about 24 ounces/day and we've dodged a bullet for now. He's 14 and I'm grateful for every day.
His bloodwork came back age appropriate for kidney function. Heart is good. The vet is perplexed why he is consuming so much water. For now monitor and report back in a month for chest and abdomen x ray if condition remains the same. Sooner if it worsens. So far it sounds like we limit his water to about 24 ounces/day and we've dodged a bullet for now. He's 14 and I'm grateful for every day.
#1522
Klaatu..Verata..Necktie?
Join Date: May 2007
Location: SF Bay Area
Posts: 18,391
Bikes: Litespeed Ultimate, Ultegra; Canyon Endurace, 105; Battaglin MAX, Chorus; Bianchi 928 Veloce; Ritchey Road Logic, Dura Ace; Cannondale R500 RX100; Schwinn Circuit, Sante; Lotus Supreme, Dura Ace
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 10642 Post(s)
Liked 12,297 Times
in
6,296 Posts
Since he turned 14 back in September, I've been hypervigilant about his eating.- the first sign of Zeena's decline was when she stopped being our chowhound. So, on the occasional day when he's not all that hungry, I get anxious. Then he wolfs down his food and bugs us for more. And there are days when he's a little slow getting up, and walking a little stiffly. Then he'll come galloping in from the yard, leap over the back steps and galumph through the house, followed by a minute or two of jump-spins.
__________________
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles
#1523
Senior Member
Join Date: Sep 2005
Location: In the foothills of Los Angeles County
Posts: 25,567
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 8442 Post(s)
Liked 9,392 Times
in
4,615 Posts
Some are quite complex and cause headaches for technicians.
#1524
Klaatu..Verata..Necktie?
Join Date: May 2007
Location: SF Bay Area
Posts: 18,391
Bikes: Litespeed Ultimate, Ultegra; Canyon Endurace, 105; Battaglin MAX, Chorus; Bianchi 928 Veloce; Ritchey Road Logic, Dura Ace; Cannondale R500 RX100; Schwinn Circuit, Sante; Lotus Supreme, Dura Ace
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 10642 Post(s)
Liked 12,297 Times
in
6,296 Posts
The new cone wrench arrived, so I went to work and re-did the hubs. They hardly needed it! Immaculate bearing tracks with no hint of pitting, the grease was still grease, not wax, and no evidence of water penetration. Also, the original cone adjustment was nothing short of incredible. I was watching a video yesterday suggesting you should tighten the cones down till there's SOME play, so it would be taken up when you tighten the QR. These have always had zero play and still nice and free once the QR is tight. I used that as my goal in adjusting the cones. I think I got close.
My big fear in all this was that I'd order everything to rebuild the wheels and then discover the hubs were too worn. Nope! Should be good for thousands more miles! If only I can build the wheels good enough!
My big fear in all this was that I'd order everything to rebuild the wheels and then discover the hubs were too worn. Nope! Should be good for thousands more miles! If only I can build the wheels good enough!
__________________
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles
#1525
VFL For Life
Join Date: Feb 2005
Location: Knoxville, TN
Posts: 51,626
Bikes: Velo Volmobile
Mentioned: 781 Post(s)
Tagged: 2 Thread(s)
Quoted: 28970 Post(s)
Liked 1,934 Times
in
1,362 Posts
I thought the reason people did this is because there isn't one?