First FG, Pedaling Through Turns?
#1
Member
Thread Starter
First FG, Pedaling Through Turns?
Recently put together my first fixed gear, a LeMond Spine frame custom spec’d by someone around 2005. Had a paddywagon 10 years ago or so, never got up the gumption to switch the wheel.
I commute a Salsa Journeyman 650b, 18 miles a day. Recently switched over from spd-sl to eggbeaters for a little extra give and walk-ability.
So my issue... had a good slide across the pavement on the way home Thursday on the Salsa. Pedaling through a right turn I clipped a pedal and immediately went sideways. Easy solution, don’t pedal through turns.
What’s the solution with a fixed gear? Slow down? Eggbeater clearance sucks switch back to spd-sl? Rock the single speed forget about it?
Both bikes have 170mm cranks. Specs say 72mm bb drop on the Salsa, 70mm on the LeMond.
I’m not young enough to bounce and rally too many more times
I commute a Salsa Journeyman 650b, 18 miles a day. Recently switched over from spd-sl to eggbeaters for a little extra give and walk-ability.
So my issue... had a good slide across the pavement on the way home Thursday on the Salsa. Pedaling through a right turn I clipped a pedal and immediately went sideways. Easy solution, don’t pedal through turns.
What’s the solution with a fixed gear? Slow down? Eggbeater clearance sucks switch back to spd-sl? Rock the single speed forget about it?
Both bikes have 170mm cranks. Specs say 72mm bb drop on the Salsa, 70mm on the LeMond.
I’m not young enough to bounce and rally too many more times
Last edited by Maslin; 10-05-19 at 12:29 PM.
#2
Senior Member
Join Date: Apr 2016
Location: Traveling through time, will return last week.
Posts: 730
Bikes: Bare Rum Sword Knuckle Runner
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 278 Post(s)
Liked 122 Times
in
64 Posts
get a frame designed to be ridden fixed. they have less bb drop for a reason.
#3
Full Member
#4
Member
Thread Starter
Didn’t think of that, 12-18mm is significant.
As popular as fixed gears are in Portland, they haven’t found their way down I5 yet.
I have to imagine that a 55mm bb drop frame with platform and straps is fairly close to a 70mm bb drop frame with clipless pedals. So then what? Does slowing down come with experience? I’ve been riding bikes for 30 years, you know when you can pedal through or need to coast without thinking about it.
As popular as fixed gears are in Portland, they haven’t found their way down I5 yet.
I have to imagine that a 55mm bb drop frame with platform and straps is fairly close to a 70mm bb drop frame with clipless pedals. So then what? Does slowing down come with experience? I’ve been riding bikes for 30 years, you know when you can pedal through or need to coast without thinking about it.
Last edited by Maslin; 10-05-19 at 02:14 PM.
#5
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,792
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3591 Post(s)
Liked 3,401 Times
in
1,935 Posts
Take it easy until you've learned how fast/hard you can corner without pedal strike. Just about everybody dumps it a couple times when they're first starting out. Take it easy on unfamiliar corners as well. Road conditions and camber can make pedal strike more likely.
Is this a road frame conversion to fixed gear? If so, how long are the crank arms? Road frames tend to have lower bottom brackets (and thus less ground clearance) than true track frames. Shorter crank arms will lessen the likelihood of pedal strike.
Is this a road frame conversion to fixed gear? If so, how long are the crank arms? Road frames tend to have lower bottom brackets (and thus less ground clearance) than true track frames. Shorter crank arms will lessen the likelihood of pedal strike.
#6
Member
Thread Starter
Take it easy until you've learned how fast/hard you can corner without pedal strike. Just about everybody dumps it a couple times when they're first starting out. Take it easy on unfamiliar corners as well. Road conditions and camber can make pedal strike more likely.
Is this a road frame conversion to fixed gear? If so, how long are the crank arms? Road frames tend to have lower bottom brackets (and thus less ground clearance) than true track frames. Shorter crank arms will lessen the likelihood of pedal strike.
Is this a road frame conversion to fixed gear? If so, how long are the crank arms? Road frames tend to have lower bottom brackets (and thus less ground clearance) than true track frames. Shorter crank arms will lessen the likelihood of pedal strike.
The track frames I’ve found are all 52-58mm bb drop compared to the LeMond’s 70mm. Hoping clipless and my carbon soled road shoes would make up that ~15mm compared to straps and Vans.
#7
Senior Member
Join Date: Sep 2009
Location: PHL
Posts: 9,948
Bikes: Litespeed Catalyst, IRO Rob Roy, All City Big Block
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 1332 Post(s)
Liked 398 Times
in
194 Posts
Definitely have to watch your lean. Slow down and take corners a little more upright while you get a feel for how much you can lean it without striking a pedal.
#8
Senior Member
Join Date: Sep 2009
Location: USA
Posts: 2,067
Bikes: 84 Pinarello Trevisio, 86 Guerciotti SLX, 96 Specialized Stumpjumper, 2010 Surly Cross Check, 88 Centurion Prestige, 73 Raleigh Sports, GT Force, Bridgestone MB4
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 278 Post(s)
Liked 71 Times
in
56 Posts
Again, a bicycle with a high bottom bracket is the ticket. That 12 to 15 mm is significant due to the angles, it matters and cannot be rationalized away. Or, install a free wheel.
#9
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,792
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3591 Post(s)
Liked 3,401 Times
in
1,935 Posts
#10
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
A high bottom bracket makes up for a lot of issues, but since you can't change that on this frame, there are other things to look at:
- Are you using the correct (short) bottom bracket for this crank? I've seen a number of poorly-thought-out conversions where they just stuck a SS crank on their old bottom bracket, or took the small ring off their road double and wrapped the chain around the big ring. Either way, the cranks are out too far, increasing the risk of pedal strike.
- A crankset with a low Q-factor would help. Some cheap generic SS cranks have a wide Q-factor in order to clear the chainstays on any frame.
- Shorter cranks are a good idea, regardless. See if you can exchange your 170's for 165's.
What crankset and BB are you running now, @Maslin?
#11
Full Member
This is the same bike with different cranks but the same length 165 but with BMX platform pedals and straps and I did sometimes have pedal strike but rarely.
This is my track bike currently with look road pedals and I've never had pedal strike with them.
Likes For ryan_rides:
#12
Member
Thread Starter
170mm Sram Red Carbon 10sp crankset. Chain ring is mounted on the inside of the arm.
looks like it could lose 4-5mm toward the chain stay, although my heels are closer on this than any other bike I’ve had.
It’s definitely a combination of parts that aren’t ideal. I’ll keep an eye out for a 165mm single speed crankset.
It would obviously work better as a single speed, but where’s the fun in that.
looks like it could lose 4-5mm toward the chain stay, although my heels are closer on this than any other bike I’ve had.
It’s definitely a combination of parts that aren’t ideal. I’ll keep an eye out for a 165mm single speed crankset.
It would obviously work better as a single speed, but where’s the fun in that.
#13
Senior Member
Join Date: May 2013
Location: Greenwood SC USA
Posts: 2,252
Bikes: 2002 Mercian Vincitore, 1982 Mercian Colorado, 1976 Puch Royal X, 1973 Raleigh Competition, 1971 Gitane Tour de France and others
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 823 Post(s)
Liked 1,395 Times
in
694 Posts
For the life of me I can't find the article or discussion online, but I remember reading about the Walden Turn, named for Mike Walden of the Wolverine Sports Club - essentially you kept your bike more upright and leaned your body into the turn, thus allowing you to continue pedaling through the turn. I've been doing that for maybe 15 years now, to where it's ingrained behavior on a fixed-gear, and so far it has worked nicely. I think that maneuver was also described in Delong's Guide to Bicycles and Bicycling. It's a holdover from the era when almost all U.S. racing, road or track, was on fixed-gears.
Last edited by rustystrings61; 10-08-19 at 09:09 AM.
Likes For rustystrings61:
#14
I'm the anecdote.
Join Date: Apr 2019
Location: S.E. Texas
Posts: 1,822
Bikes: '12 Schwinn, '13 Norco
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 1110 Post(s)
Liked 1,176 Times
in
795 Posts
For the life of me I can't find the article or discussion online, but I remember reading about the Walden Turn, named for Mike Walden of the Wolverine Sports Club - essentially you kept your bike more upright and leaned your body into the turn, thus allowing you to continue pedaling through the turn. I've been doing that for maybe 15 years now, to where it's ingrained behavior on a fixed-gear, and so far it has worked nicely. I think that maneuver was also described in Delong's Guide to Bicycles and Bicycling. It's a holdover from the era when almost all U.S. racing, road or track, was on fixed-gears.
https://www.nytimes.com/1991/12/08/t...ain-of-it.html
#15
Sophomore Member
Join Date: Jan 2019
Posts: 2,531
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1628 Post(s)
Liked 1,059 Times
in
633 Posts
European racers use this same technique to get around muddy cobbled turns. I use it lot for turns on pavement where there's sand or gravel and I'm not confident of being able to get good traction.
Last edited by Lemond1985; 10-09-19 at 05:36 AM.
#16
Senior Member
Join Date: Feb 2018
Posts: 1,410
Bikes: 2017 Specialized Allez Sprint Comp
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 850 Post(s)
Liked 344 Times
in
247 Posts
Watch fixed gear crits and see if you can replicate their setups. Those guys lean harder than most normal roadies. It just comes down to high BBs and short cranks. Some guys will time their hardest lean with the moment their pedals are away from the ground. That’s much tougher but it’s high risk, high reward.
#17
Calamari Marionette Ph.D
#18
Member
Thread Starter
Yeah... I flipped the flip flop back to freewheel. I'll give fixed another shot, but I'm really enjoying it either way. The simplicity of a single speed is calming. Even commuted on my 18 mile loop Monday, my wife likes that I'm not leaving her behind on it, 42/16 only spins out so fast.
Thanks for the replies, that article was interesting. I'll try some corners superbike style and see how it goes.
Thanks for the replies, that article was interesting. I'll try some corners superbike style and see how it goes.
Last edited by Maslin; 10-09-19 at 11:50 AM.
#19
Senior Member
#20
Senior Member
Join Date: Jan 2015
Posts: 191
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 49 Post(s)
Likes: 0
Liked 11 Times
in
11 Posts
I had a conversion once.
I guess I got lucky and the BB was already high.
I would notice small pedal strike, but I thought it was normal and just avoided learning too hard (or I would sorta ease into the turn to see if it was possible).
It never put me on my derrier though.
When I bought a proper FG frame, I never had pedal strike, and I had been in some extremely leany turns.
So, I guess like others have said, the BB height matters.
I guess I got lucky and the BB was already high.
I would notice small pedal strike, but I thought it was normal and just avoided learning too hard (or I would sorta ease into the turn to see if it was possible).
It never put me on my derrier though.
When I bought a proper FG frame, I never had pedal strike, and I had been in some extremely leany turns.
So, I guess like others have said, the BB height matters.
#21
Full Member
My fixed gear bike is a Surly Cross Check which has a high BB. I can really "hammer it" through the turns (60 yrs old).
Likes For takenreasy:
#22
Senior Member
Join Date: Jan 2015
Posts: 191
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 49 Post(s)
Likes: 0
Liked 11 Times
in
11 Posts
Yeah... I flipped the flip flop back to freewheel. I'll give fixed another shot, but I'm really enjoying it either way. The simplicity of a single speed is calming. Even commuted on my 18 mile loop Monday, my wife likes that I'm not leaving her behind on it, 42/16 only spins out so fast.
Thanks for the replies, that article was interesting. I'll try some corners superbike style and see how it goes.
Thanks for the replies, that article was interesting. I'll try some corners superbike style and see how it goes.
Likes For BicycleBicycle:
#23
Senior Member
My peddles touch, too,and I don't even have to lean in much at all. My bike was initially a road bike. The cranks are 170 mm, ugh. To make matters worse, my peddles are quite long.
Doing tricks, such as steering with feet, can be tricky, as falling from such a position wouldn't be easy to bail from.
I have one ever so partial remedy, but I cannot speak for your safety, unless it is done correctly. Chances are this issue has resulted from using a road bike which has vertical dropouts; so, you could gain a 1/4-1" by using a dropout converter and solve the chain tension problem in one go.
BUT! You must install it correctly, or your bike will be even more dangerous! That may involve welding, so it doesn't move.
I haven't done this yet but am still thinking it over.
Just an idea.
Doing tricks, such as steering with feet, can be tricky, as falling from such a position wouldn't be easy to bail from.
I have one ever so partial remedy, but I cannot speak for your safety, unless it is done correctly. Chances are this issue has resulted from using a road bike which has vertical dropouts; so, you could gain a 1/4-1" by using a dropout converter and solve the chain tension problem in one go.
BUT! You must install it correctly, or your bike will be even more dangerous! That may involve welding, so it doesn't move.
I haven't done this yet but am still thinking it over.
Just an idea.
#25
Member
Thread Starter
The LeMond Fillmore has the same 70mm BB drop. A true 165mm SS crankset that barely clears the frame must be the way to go.
I could lose 4-5mm on each side in width, along with 5mm in length. Some Look Keo's and I'd be as far out of the way as possible.
I'm beginning to think the issue of clipping a pedal has much more to do with the road than the bike. I can lay the bike way way over before the pedal hits in my garage, but I tap it fairly regularly when actually riding.
I'll stop thinking now and go ride a bike, too bad those Fillmore's are so hard to find
I could lose 4-5mm on each side in width, along with 5mm in length. Some Look Keo's and I'd be as far out of the way as possible.
I'm beginning to think the issue of clipping a pedal has much more to do with the road than the bike. I can lay the bike way way over before the pedal hits in my garage, but I tap it fairly regularly when actually riding.
I'll stop thinking now and go ride a bike, too bad those Fillmore's are so hard to find