ISO and for trade thread part 5
#5351
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,790
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3590 Post(s)
Liked 3,401 Times
in
1,935 Posts
The axle locknut thread is a somewhat unusual 7mm x 0.75mm thread; maybe source from a place like McMaster-Carr? Otherwise, other pedal hardware e.g. Campagnolo Gran Sport, Gipiemme Dual-Sprint, Ofmega, etc. pedals axles, cones and hardware are interchangeable with Record and Superleggero pedals. You might be able to find a beat-up set of one of those, from which a locknut can be scavenged.
The dustcap thread is pretty common. MKS Sylvan dustcaps will fit, are widely available and affordable. If the MKS logo offends you, you can file it off and make the cap anonymous. It won't look like the Campagnolo cap, but if you use it on the non-drive side pedal and nobody will notice.
Before and after "anonymizing:"
The dustcap thread is pretty common. MKS Sylvan dustcaps will fit, are widely available and affordable. If the MKS logo offends you, you can file it off and make the cap anonymous. It won't look like the Campagnolo cap, but if you use it on the non-drive side pedal and nobody will notice.
Before and after "anonymizing:"
Likes For JohnDThompson:
#5352
Senior Member
Join Date: Jun 2014
Location: Ontario, Canada
Posts: 4,624
Bikes: iele Latina, Miele Suprema, Miele Uno LS, Miele Miele Beta, MMTB, Bianchi Model Unknown, Fiori Venezia, Fiori Napoli, VeloSport Adamas AX
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1324 Post(s)
Liked 927 Times
in
640 Posts
I think I covered all of the varied names for that size!
I'm hoping to put some alloy rims on my Superbe that I actually use as a rainy-day commuter and guest bike (both scenarios where braking performance is worth having), but also want to maintain the look as best I can. I know CR18s used to come in a polished finish in this size, but it would seem that is no longer the case.
If anyone has any 36h polished CR18s (or similar) in ISO 590 kicking around that they'd like to make a buck off of, let me know!
(I am in Canada, but could probably bug a friend in Rochester to ferry these for me if needed)
I'm hoping to put some alloy rims on my Superbe that I actually use as a rainy-day commuter and guest bike (both scenarios where braking performance is worth having), but also want to maintain the look as best I can. I know CR18s used to come in a polished finish in this size, but it would seem that is no longer the case.
If anyone has any 36h polished CR18s (or similar) in ISO 590 kicking around that they'd like to make a buck off of, let me know!
(I am in Canada, but could probably bug a friend in Rochester to ferry these for me if needed)
Cheers
#5354
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,579
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1609 Post(s)
Liked 2,216 Times
in
1,103 Posts
The axle locknut thread is a somewhat unusual 7mm x 0.75mm thread; maybe source from a place like McMaster-Carr? Otherwise, other pedal hardware e.g. Campagnolo Gran Sport, Gipiemme Dual-Sprint, Ofmega, etc. pedals axles, cones and hardware are interchangeable with Record and Superleggero pedals. You might be able to find a beat-up set of one of those, from which a locknut can be scavenged.
The dustcap thread is pretty common. MKS Sylvan dustcaps will fit, are widely available and affordable. If the MKS logo offends you, you can file it off and make the cap anonymous. It won't look like the Campagnolo cap, but if you use it on the non-drive side pedal and nobody will notice.
The dustcap thread is pretty common. MKS Sylvan dustcaps will fit, are widely available and affordable. If the MKS logo offends you, you can file it off and make the cap anonymous. It won't look like the Campagnolo cap, but if you use it on the non-drive side pedal and nobody will notice.
I was wondering what other pedals might supply the parts.
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
#5355
Industry guy
Likes For 100bikes:
#5356
Newbie
Join Date: Apr 2021
Location: Ontario, Canada
Posts: 22
Bikes: Rivendell Sam Hillborne, '70 Raleigh Superbe, No-serial Mandaric 80s MTB turned klunker, '96 Rocky Mountain Hammer, '75 Sekine fixed conversion, Bertus Bakfiets
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
#5357
Senior Member
Join Date: Jan 2004
Location: Madison, WI USA
Posts: 6,157
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 2364 Post(s)
Liked 1,751 Times
in
1,193 Posts
^^^^ First "vacation" with the girl I married was in Elora; we X-C skied the gorge trails, going on 40 years ago now.
#5358
Senior Member
Join Date: Oct 2009
Posts: 1,104
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 288 Post(s)
Liked 330 Times
in
160 Posts
I need the washer and lock nut and of course the cap for only one of the pair.
68FrejusSRPedals on Flickr
@ me or PM.
Thanks.
68FrejusSRPedals on Flickr
@ me or PM.
Thanks.
#5359
Senior Member
I have multiple sets of the beartrap style pedals and would gladly trade for a set of 730's. Or I _might_ have a set of rectangular shaped ones of some sort but my junk is in storage at the moment so it would take me a week or so to find out.
#5360
Junior Member
In the meantime, here's a peek at the 730's.
#5361
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,579
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1609 Post(s)
Liked 2,216 Times
in
1,103 Posts
#5363
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,790
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3590 Post(s)
Liked 3,401 Times
in
1,935 Posts
#5364
Senior Member
Join Date: Sep 2012
Location: Calgary
Posts: 665
Bikes: Condor, Cinelli SC, MKM Metcalfe, Peugeot AE08, Bianchi, Cougar, Miyata, Harry Hall, Holdsworth Special, Raleigh Int'l, Le Croco, Bob Jackson, Zeus
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 114 Post(s)
Liked 102 Times
in
53 Posts
Campy NR Globe gum brake lever hoods
Does anyone have a good, recent source of these hoods. So many of them online look like they're made of the wrong rubber.
thanks.
Brad
thanks.
Brad
__________________
Better bike .. Better life!
Better bike .. Better life!
#5366
Stop reading my posts!
Join Date: Sep 2004
Posts: 12,584
Mentioned: 90 Post(s)
Tagged: 0 Thread(s)
Quoted: 1444 Post(s)
Liked 1,064 Times
in
788 Posts
It's messy (wear gloves and use a bunch of cloth rags) and takes time but nearly always does the job.
After air-drying the works, spray in a light weight lube of your choice, it won't be as durable as the OEM grease so you'll need to repeat lubrication periodically, but DON'T rely on the flush-out fluid to be your lube.
#5367
Senior Member
Join Date: Oct 2022
Posts: 1,378
Bikes: a couple
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 563 Post(s)
Liked 863 Times
in
456 Posts
have you confirmed there are parts actually broken inside the unit? Cause if it's merely stopped shifting (as often occurs with age) the easy cure is to flush out the old dried up grease with a big long bath of WD-40 or PB Blaster and working the mech until all grease has softened up and moved along.
It's messy (wear gloves and use a bunch of cloth rags) and takes time but nearly always does the job.
After air-drying the works, spray in a light weight lube of your choice, it won't be as durable as the OEM grease so you'll need to repeat lubrication periodically, but DON'T rely on the flush-out fluid to be your lube.
It's messy (wear gloves and use a bunch of cloth rags) and takes time but nearly always does the job.
After air-drying the works, spray in a light weight lube of your choice, it won't be as durable as the OEM grease so you'll need to repeat lubrication periodically, but DON'T rely on the flush-out fluid to be your lube.
#5368
Senior Member
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,707
Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 1952 Post(s)
Liked 2,013 Times
in
1,112 Posts
Campy TT cable guide screw?
I lost one last night when the spring clip launched it over my shoulder. I think it landed on the work bench but…
I think it is a 1/2 size that my Ace doesn’t have. What size are they?
Jeff
Edit: it is a 5-40 machine screw.
I think it is a 1/2 size that my Ace doesn’t have. What size are they?
Jeff
Edit: it is a 5-40 machine screw.
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
Last edited by Classtime; 11-21-22 at 04:25 PM.
#5369
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,514
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2422 Post(s)
Liked 4,396 Times
in
2,093 Posts
#5370
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,820
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2440 Post(s)
Liked 3,135 Times
in
1,974 Posts
MTB? Or standard touring? I am pretty sure I have some. Let me check.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#5371
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,514
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2422 Post(s)
Liked 4,396 Times
in
2,093 Posts
Have thrown too much effort and money at the thing already - the goal is simply to get rid of it with the least additional expense.
-Kurt
#5372
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,820
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2440 Post(s)
Liked 3,135 Times
in
1,974 Posts
It's for that '88 Schwinn Voyageur I've had kicking around, so technically touring, but I'll take MTB too. Not picky, just want something that works that's compatible with the Shimano 6-speed shifter.
Have thrown too much effort and money at the thing already - the goal is simply to get rid of it with the least additional expense.
-Kurt
Have thrown too much effort and money at the thing already - the goal is simply to get rid of it with the least additional expense.
-Kurt
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#5373
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,514
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2422 Post(s)
Liked 4,396 Times
in
2,093 Posts
#5374
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,820
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2440 Post(s)
Liked 3,135 Times
in
1,974 Posts
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#5375
Senior Member
Join Date: Mar 2007
Location: SF Bay Area, East bay
Posts: 7,663
Bikes: Miyata 618 GT, Marinoni, Kestral 200 2002 Trek 5200, KHS Flite, Koga Miyata, Schwinn Spitfire 5, Mondia Special, Univega Alpina, Miyata team Ti, Santa Cruz Highball
Mentioned: 53 Post(s)
Tagged: 0 Thread(s)
Quoted: 1612 Post(s)
Liked 2,594 Times
in
1,225 Posts
That Deore is the ticket.