just posted this at the mechanics forum, but figured I'd post here too:

I think it's quite possible that I undertensioned the wheel, but I was practicing wheelies on my fixed road bike while clipped in to the straps. I was leaning too much left, fell over and rolled, and I'm not sure exactly what happend to the bike, but I think the rear wheel just hit the ground real hard after the handlehars hit. did I just waste 65 dollars? or is there any way that I can just re-bend the wheel into shape, and re-true and tension it?

i tocoed a wheel before getting hit by a limo and all i did was bend it back in a fence still alittle out of true but works for my beater

Can't rebend that back... I mean, you can to ride it home, but you need a new rim. Build it properly next time and that won't happen.

-brad

have someone who actually knows what they're doing build you a new wheel.

Aluminum doesn't like to bend too much before just snapping, get a new rim.

damn...yall are not telling me what I would like to be hearing..., and I def would not like to be hearing that word 'new' right about now

Imma try and fix this ****...and I actually would rather do something myself (just like I actually build it up myself the first time) than have someone else build me a new wheel
trial and error...live and learn...that's what I'm bout to do

I would call my "taco" an extreeeeme wobble (I could not roll my bike), so I'm going to see if I can fix it, cause I know that while building my wheel, I'd made a pretty serious wobble that turned straight as an arrow in a few seconds


I just took the tension down on the wheel, bent it a little back into shape, and am about to true and re-tension the wheel....

we'll see how it goes

he's right. you're asking for trouble.

get a new rim.

check out this thread. https://www.bikeforums.net/singlespeed-fixed-gear/100485-hal-bicycle-habitat-man.html

Get a tension meter.

Even if you can get it trued again, the spoke tension will likely be way off in places and just lead to more problems in the future. Welcome to your new rim (and tension meter).

thanks potus...Rev. Chuck actually replied to my message in the maintenance forum and advised me to do the same thing..."whap" the wheel against the ground....

I threw my tire back on my rim...threw 110psi in there to cushion the rim (and my floor), and I tried it...and...it worked well !....although I should prob tension and true a bit more, the rim is lookin' straight as a blade

I'd also highly rec. not doing that ( ^ ) again. OP's are for roads, not trials. Designed to be one of two wheels under you, and in constant contact with the ground, rather than bouncing...

Shhh, don't tell anyone, it's a secret.