basic bottom bracket help
10-02-07 | 07:39 PM
#1
Thread Starter
alright now
Joined: Apr 2007
Posts: 325
Likes: 0
From: Boston, MA
Bikes: some bike
basic bottom bracket help
i recently broke one of the stock "truativ" crank arms that came on my bikezdirect moto and was wondering what my options were for a new set. i was thinking about getting some sugino rd's but wasn't sure if it would fit the bottom bracket that came with the frame. thanks.
10-02-07 | 08:15 PM
#2
fails just as quickly
Joined: Apr 2006
Posts: 522
Likes: 1
From: two miles behind
What is the spindle interface?
If it's powerspline, like many truvativ cranks appear to be, the rd's will not work (and your choices will be limited). If it's square taper, they might work, but since sugino recently changed the chainline spec, I'm not sure if the 103mm spindle will be the proper length.
If it's powerspline, like many truvativ cranks appear to be, the rd's will not work (and your choices will be limited). If it's square taper, they might work, but since sugino recently changed the chainline spec, I'm not sure if the 103mm spindle will be the proper length.
10-03-07 | 07:07 AM
#3
Car-lite, Car Blight
Joined: Sep 2007
Posts: 64
Likes: 0
From: Pittsburgh, PA
Bikes: Several
