Bike Forums

Bike Forums (https://www.bikeforums.net/forum.php)
-   Singlespeed & Fixed Gear (https://www.bikeforums.net/singlespeed-fixed-gear/)
-   -   Today I: (https://www.bikeforums.net/singlespeed-fixed-gear/728661-today-i.html)

ktaoabc 04-10-12 12:23 PM

Last night/today i went on a group ride/bar ride. Had fun as usual and supped a sqrl and got free drinks.

ambitions2o 04-10-12 12:28 PM

Sold my bike.

Now time to shop for another one.

gigantor 04-10-12 12:29 PM


Originally Posted by Jaytron (Post 14081780)
Today gigantor and I talked about getting matching mullets

I think we need to get going on this idea.

xavier853 04-10-12 12:47 PM

wrenched on my buddies craigslist Cannondale Criterium. It was in baaaaaad shape, but took it all apart, lubed it up balls and all, and it's a lot better now. Still has a catch in the rear derailiur. It could also be the chain binding at a certain point. Only occurs when back pedaling, and only once in a while. Thinking the chain. Have to true the rear wheel.

Yes, the previous owner chopped off the drops...

http://farm6.staticflickr.com/5340/7...a65347f1_b.jpg

Also, still waiting to hear back about my wonky BB on my Concept. Should have been replaced by now... :/

EpicSchwinn 04-10-12 02:03 PM

Beautiful bike xavier. I've been keeping my eye open for one of those for a looooong time.

Today and yesterday I've been getting back into my Dawes. Going from the Soma to that is kind of like switching from a roadster to a big-ass truck. I kind of forgot how fun it is to plow through any obstacle and go off-road. Probably gonna do a little tuning up later. The brakes need a little adjusting, wheels severely need to be trued, and chain needs to be cleaned and lubed.

JohnDThompson 04-10-12 08:01 PM

Started working in a bike shop again, after 20+ years out of the bicycle industry. :thumb:

Dannihilator 04-10-12 08:16 PM

Today I finished a blitz of work sessions at the pumptrack.

jimmytango 04-10-12 08:57 PM

Today I got some stuff in the mail. I now have Fyxation bar ends, a Halo FW thread cover, a Retrogression sticker pack, a BFSSFG sticker, and a muhfuggin Rev-X.

Leukybear 04-10-12 09:07 PM


Originally Posted by JohnDThompson (Post 14084073)
Started working in a bike shop again, after 20+ years out of the bicycle industry. :thumb:

The old LBS guys are the best.

LesterOfPuppets 04-10-12 09:45 PM

Hope ya liked it JDT. I'm freshly back in a shop first time in about 13 years.

Today I got out on the free spirit. No BBs short enough for my campy cranks so it has 2x right cranks. triple on the right, double on the left.

39x16 seems to be perfect for this slowpoke. 32mm Marathons dont fit on back, so 28 there.

http://farm8.staticflickr.com/7085/6...ca7932b1_b.jpg
2012-04-10_19-11-57_463.jpg by Lester Of Puppets, on Flickr

Nagrom_ 04-10-12 10:05 PM

Today I decided to get a lot more serious about cycling. Made a workout plan to start doing. Not on a bike as much as I'd like due to my schedule, but It'll do. Its looking like no less than 50 miles a week, not counting track time. Weight room a couple times a week, and a lot of stretching.

Kind of excited; can't wait for the summer.

gigantor 04-10-12 10:22 PM

What about using a trainer? It's quick and dirty and does the job.

There is also the added benefit that you're on a bike you will actually be riding.

EpicSchwinn 04-10-12 10:29 PM


Originally Posted by jimmytango (Post 14084292)
Today I got some stuff in the mail. I now have Fyxation bar ends, a Halo FW thread cover, a Retrogression sticker pack, a BFSSFG sticker, and a muhfuggin Rev-X.

awww yeah. Treat her gently :thumb:

Jaytron 04-10-12 11:48 PM

Today it was raining pretty hard and I got a flat tire. Talk about irritating.

LesterOfPuppets 04-10-12 11:55 PM

also today I couldn't resist the monochrome grey chucks.
http://farm8.staticflickr.com/7083/7...0bebb1f0_b.jpg
2012-04-10_22-11-36_940.jpg by Lester Of Puppets, on Flickr

Sixty Fiver 04-11-12 12:06 AM


Originally Posted by JohnDThompson (Post 14084073)
Started working in a bike shop again, after 20+ years out of the bicycle industry. :thumb:

They will not be able to pay you a fraction of what you are worth...

carleton 04-11-12 10:36 AM

Today I used chain lube to lube my hair clippers.

Seemed like a good idea.

hairnet 04-11-12 10:43 AM

Did it work out?

Scrodzilla 04-11-12 11:03 AM


Originally Posted by EpicSchwinn (Post 14084579)
awww yeah. Treat her gently or she'll explode.

fixed

ddeadserious 04-11-12 11:07 AM

Today, my coworker brought some SIDI shoes in my size to try before I drop real money on clipless. Now I just need some cheap SPD pedals. Anybody have a set?

carleton 04-11-12 11:12 AM


Originally Posted by hairnet (Post 14085793)
Did it work out?

Actually, yeah! Better than the Andis clipper oil that I've been using.

I guess the key is to see how long it lasts or if it will break down with the heat of the clippers over time.

RGNY 04-11-12 01:27 PM

...realized that my B43's are not going to work out for my current build. swapping out for Alex DC19's for now.

and i just wanted to be one of the cool kids....

Santaria 04-11-12 01:38 PM

Where does one get a BFSSFG sticker, by chance?

Leukybear 04-11-12 01:42 PM


Originally Posted by Santaria (Post 14086549)
Where does one get a BFSSFG sticker, by chance?

Who else but our very own scrod?

On a brighter note; somebody actually turned in my helmet! Faith in humanity restored! :D

RGNY 04-11-12 01:58 PM

in other news, i just went to take the freewheel off the DC19 rear wheel.

don't have a freewheel tool, so i was going to go at it with a hammer/screwdriver.

wasn't even finger tight.

i'd never used the freewheel but now i remember that there wasn't one tight part on the whole bike when i brought it home from the LBS. grrr...


All times are GMT -6. The time now is 06:34 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.