flat bars
#26
Survival of the Fitest

Joined: Jul 2004
Posts: 1,559
Likes: 4
From: PDX
Bikes: 198? Univega Custom Maxima, 2009 Motobecane Fantom Cross Uno
Originally Posted by BostonFixed
Yea, I've rocked the flat bars a few times, and they're pretty b*itchin. A lowish stem, 0 deg rise, and shortish flat bars, it is awesome for riding. I like it that you are still in an upright position while riding, but you hands are nice and low. Weaving through traffic with flat bars is the best.
Cut 'em thin. Wide bars suck on the road.
I dunno about risers, the asthetics sort of bother me on a SS/fixed gear bike, but i've never used them....
Cut 'em thin. Wide bars suck on the road.
I dunno about risers, the asthetics sort of bother me on a SS/fixed gear bike, but i've never used them....
#27
"I love lamp"

Joined: May 2004
Posts: 427
Likes: 0
From: Dirty Jersey
Bikes: 06 Fuji Track with upgrades, 06 Redline Flight Monocog, 01 Trek XO1, 2003 Cervelo P3, 2006 Bianchi San Jose monstercross
Originally Posted by Grunk
Its a Cane Creek inline lever. I wanted to cut the bars narrower, but the lever doesn't like to be mounted on the bend. I may switch to an Odyssey Monolever, so I can cut another inch off the bars.


#28
Grease Monkey
Joined: Oct 2004
Posts: 196
Likes: 0
From: cleveland, ohio
Bikes: Schwinn LeTour, Giant TCR2, Fetish Cycles SAC Aero, Fixed gear Pursuit bike, Fixed gear Raleigh, Hoffman Momentum Flatland
i run a tech 77 on my bmx bike and my fixed, they work great! i love the curve in the lever, its just right(sorry to get off topic)
#29
Not to participate in the threadjack, but I know I find myself sometimes having to pull my elbows in. I don't know if I *really* need that space, but I feel like it. Some folks from Saturday may have seen me do this. I've also been known to lean my way down the side of a bus to make my gap.
#34
northern grit

Joined: Nov 2003
Posts: 50
Likes: 0
From: Nottingham / West Lancs, England
Bikes: ENO Fixed, Airborne Carpe Diem and DK Four Pack
Originally Posted by TheDL
...cut their bars to match the width of thier shoulders and that's it.
Typically, with your upper body relaxed, have someone measure the widest points between the bones in the outer shoulder (NB: measure straight, don't lay the tape across the shoulders) - this is the (rough) measure of the centre-centre dimensions of your bars. Track riders often go down in size for some reason, not quite sure (beyond aero'd's)
Olly
#35
Banned.
Joined: Oct 2004
Posts: 4,416
Likes: 1
Originally Posted by rykoala
Here's my accordo with the flatbar on it. Don't mind the ultra-long brake cables- they've since been shortened up to size.


Looks like a nice conversion, matching tires would make it look a lot better!
#36
Originally Posted by TheDL
Don't mean to hijack the thread.....but here I go.
Any reason why those inline type levers couldn't be mounted with the barrel adjusters pointing backward on a set of bullhorns? Can you picture what I'm saying?
Any reason why those inline type levers couldn't be mounted with the barrel adjusters pointing backward on a set of bullhorns? Can you picture what I'm saying?
#37
Originally Posted by BostonFixed
Yo, ryko. Get some BMX single chainring bolts and remove the outside ring that you are not using. It will be the best $5 upgrade that you ever spent!
Looks like a nice conversion, matching tires would make it look a lot better!
Looks like a nice conversion, matching tires would make it look a lot better!

#38
Yup

Joined: Jan 2004
Posts: 3,083
Likes: 6
From: where the sunbeams end and the starlight begins
Bikes: Kona Unit, planet X cx bike, khs fixed gear
Shiznaz, nice photo. King of Kensington. Where is that statue? Don't remember seeing it down in that area.
__________________
When sadness fills my days
It's time to turn away
And then tomorrow's dreams
Become reality to me
When sadness fills my days
It's time to turn away
And then tomorrow's dreams
Become reality to me
#39
><
Joined: Dec 2004
Posts: 239
Likes: 0
From: brooklyn!
Bikes: a disassembled bianchi lynx i'm gonna convert to ss, a felt roadie with carbon fork, and my baby blue peugeot roadie conversion. a couple sizes too large.
Originally Posted by BlastRadius
Hey, let's ride this weekend
Then you could show use your new cut-down MTB bars ala...

Then you could show use your new cut-down MTB bars ala...

so to keep to the thread, the bike has flat bars. i had some bar ends on it, and after removing the grip shifts decided to pull the ends in, to dial in the width -- i'm a big fan of narrow bars on my road and my fix. interestingly, going up some hills i grabbed the far end of the bars. you know, the part i was thinking of hacking off.
i found i could get a lot of leverage standing and climbing, much more power than the drop bars on my fixie. i really like it, but as said above it is different, and different in a good way.
edit: also, the straight bars seem to scare cars more than road bars. maybe it was just the road warrior aesthetic.
Last edited by neuron; 02-14-05 at 01:36 AM.
#40
Direct Hit Not Required

Joined: Nov 2003
Posts: 6,193
Likes: 2
From: San Bruno, CA
Bikes: Leopard DC1, Ridley X-Fire, GT Zaskar 9r
Not sure what the frame is. It's the FGG best converted bike winner. https://www.fixedgeargallery.com/2004/g/bellino.htm
If I find a deal on a convertee candidate, I plan to put on a set of
risers found at veloswap for $2.
If I find a deal on a convertee candidate, I plan to put on a set of
risers found at veloswap for $2.
#41
well, i did it. I friend gave me a set of specialized flat mtn bars and i threw them on. Wow what a difference. They felt great, lots of control in traffic. Hard to sprint with at first and then almost impossible to skid. Once i got home, i cut them (too narrow, need a new set). Combined with my nitto track stem in the lowest position, it allows me too sprint just fine, and i think im goona get some kind of aero bars (spinacis) for when i really want to go fast. Thanks for the pics and advice guys.






