gloves
#26
Originally Posted by TJHOO
Where have folks found mitts? I'd like to get a winddproof pair that's thin as a shell to try.
Canadian Tire
Superstore
Zellers
All the department stores carry them. They are usually in huge bins or covering entire walls at this time of the year ... and they range in price from <$10, like the ones in my photo, for a decent pair of mitts that have kept my hands warm down to some pretty bitterly cold temps ..... or perhaps a little bit more (like ~$20) for sheepskin lined leather mitts.
__________________
Rowan
My fave photo threads on BF
Century A Month Facebook Group
Machka's Website
Photo Gallery
Rowan
My fave photo threads on BF
Century A Month Facebook Group
Machka's Website
Photo Gallery
#27
Senior Member
Joined: Dec 2005
Posts: 1,655
Likes: 0
Here is an interesting idea. These are called wrist huggers. You could wear something like this over a thinner fleece glove or cycling glove to maintain dexterity and then add a glove shell to block the wind.
This would keep your palm and wrist area very warm as they would have a thicker amount of insulation and would keep the pulse area very warm. But because the fingers would have fewer layers more dexterity is maintained. These can be used under heavy ski glove or mittens also.
https://www.boothuggers.com/WristHuggers.html
This would keep your palm and wrist area very warm as they would have a thicker amount of insulation and would keep the pulse area very warm. But because the fingers would have fewer layers more dexterity is maintained. These can be used under heavy ski glove or mittens also.
https://www.boothuggers.com/WristHuggers.html
Last edited by Hezz; 12-11-06 at 10:52 PM.
#28
Enjoy

Joined: Nov 2003
Posts: 6,165
Likes: 0
From: Seattle metro
Bikes: Trek 5200
Originally Posted by dekindy
Am I silly for wondering why they don't make these for feet, or are shoe covers just as effective? I would think that you could velcro them to the cranks.
#29
Enjoy

Joined: Nov 2003
Posts: 6,165
Likes: 0
From: Seattle metro
Bikes: Trek 5200
Originally Posted by Hezz
Here is an interesting idea. These are called wrist huggers. You could were something like this over a thinner fleece glove or cycling glove to maintain dexterity and then add a glove shell to block the wind.
This would keep your palm and wrist area very warm as they would have a thicker amount of insulation and would keep the pulse area very warm. But because the fingers would have fewer layers more dexterity is maintained. These can be used under heavy ski glove or mittens also.
https://www.boothuggers.com/WristHuggers.html
This would keep your palm and wrist area very warm as they would have a thicker amount of insulation and would keep the pulse area very warm. But because the fingers would have fewer layers more dexterity is maintained. These can be used under heavy ski glove or mittens also.
https://www.boothuggers.com/WristHuggers.html
#30
Junior Member
Joined: Nov 2006
Posts: 10
Likes: 0
From: Upstate New York
Bikes: Tommasini, Land Shark, Trek 520, Easy Racer Gold Rush, Buddy Bike, Tandem, Unicycle
Several years ago I found a pair of snowmobile gloves at BJ's or Sam's that have a water resistant shell and removable fleece liner. The glove has a small zippered pocket on the top just above the knuckle area that contains a tethered swatch used to clean your glasses. The thumb is partially covered with soft material designed for dripping noses. Not only are their warm and functional; they only cost me $7.00.
#31
Senior but far from AARP
Joined: Aug 2005
Posts: 776
Likes: 0
From: Virginia
Bikes: 2006 Specialized SWorks Tarmac; 2005 Bianchi Giro; 2005 Bianchi Cross Veloce; 1997 Litespeed Catalyst; 1983 Performance Steel
Originally Posted by Machka
Walmart
Canadian Tire
Superstore
Zellers
All the department stores carry them. They are usually in huge bins or covering entire walls at this time of the year ... and they range in price from <$10, like the ones in my photo, for a decent pair of mitts that have kept my hands warm down to some pretty bitterly cold temps ..... or perhaps a little bit more (like ~$20) for sheepskin lined leather mitts.
Canadian Tire
Superstore
Zellers
All the department stores carry them. They are usually in huge bins or covering entire walls at this time of the year ... and they range in price from <$10, like the ones in my photo, for a decent pair of mitts that have kept my hands warm down to some pretty bitterly cold temps ..... or perhaps a little bit more (like ~$20) for sheepskin lined leather mitts.
#32
Originally Posted by TJHOO
Anyone found mitt shells in the US?
What about K-Mart?
And isn't there a place called Target?
Any department store should have winter gear!
__________________
Rowan
My fave photo threads on BF
Century A Month Facebook Group
Machka's Website
Photo Gallery
Rowan
My fave photo threads on BF
Century A Month Facebook Group
Machka's Website
Photo Gallery
#33
Senior but far from AARP
Joined: Aug 2005
Posts: 776
Likes: 0
From: Virginia
Bikes: 2006 Specialized SWorks Tarmac; 2005 Bianchi Giro; 2005 Bianchi Cross Veloce; 1997 Litespeed Catalyst; 1983 Performance Steel
Originally Posted by Machka
You have Walmart down there right?
What about K-Mart?
And isn't there a place called Target?
Any department store should have winter gear!
What about K-Mart?
And isn't there a place called Target?
Any department store should have winter gear!
Ordered these. Will report back.
https://www.altrec.com/shop/detail/25848/
#35
I'll ride for free
Joined: Sep 2005
Posts: 209
Likes: 0
From: Alaska
Bikes: Cannondale MTB, K2 Road bike
I use pogies, down to negative temps with a light glove underneath. My pogies are made to be used with bar ends or not. Heavier gloves if necessary, but normally just a light insulated pair of gloves. You are not attached to the bike with pogies, your hands slip in and out easily. I just bought some for my kid, if I felt there was a chance he couldn't get out of them safely, I would not have gotten him any. We always carry the instant heat packs anyway, you never know when you may need to slip one down the front of your sock (to warm the feet) or whatever. They can be placed inside the pogie, as someone pointed out before. My pogies are wind/water proof and fleece lined. They aren't too bad either for spring/fall riding when it's raining, worn without any gloves, keep my hands drying and warmer than any glove I have every purchases. I have never really found a "waterproof" glove, even neoprene or whatever they are that claim to be waterproof (but even wet, my hands stayed warm with them - in cool autumn weather).
#37
Here are the gloves that work for me:
weather that's hot/warm: cycling half-gloves
cool: light fleece liner gloves
cooler (in the 30s): Outdoor Research Gripper Gloves (outside layer is great for gripping brakes & shifters)
even cooler (upper 20s to lower 30s): OR Gripper Gloves inside nylon shells
cold (mid-twenties & below): Pearl Izumi Inferno Glove (these are the three-finger version, between the AmFib and Lobster styles)*
*I wear a size Large for the Pearls, which leaves me some room. The wiggle room is good because on icy days it lets me wear a roller-blade type hard plastic wrist protectors inside each glove. I went down on ice three times last winter and that was enough. Instinct is to stick your arm out to catch/protect yourself. Last time that happened my hand was banged up for a month, so I started using those wrist guards and they work great! I've gone down once on ice this winter and the only that was injured was my pride.
weather that's hot/warm: cycling half-gloves
cool: light fleece liner gloves
cooler (in the 30s): Outdoor Research Gripper Gloves (outside layer is great for gripping brakes & shifters)
even cooler (upper 20s to lower 30s): OR Gripper Gloves inside nylon shells
cold (mid-twenties & below): Pearl Izumi Inferno Glove (these are the three-finger version, between the AmFib and Lobster styles)*
*I wear a size Large for the Pearls, which leaves me some room. The wiggle room is good because on icy days it lets me wear a roller-blade type hard plastic wrist protectors inside each glove. I went down on ice three times last winter and that was enough. Instinct is to stick your arm out to catch/protect yourself. Last time that happened my hand was banged up for a month, so I started using those wrist guards and they work great! I've gone down once on ice this winter and the only that was injured was my pride.
Last edited by rideon7; 05-13-07 at 09:26 AM.
#39
Senior but far from AARP
Joined: Aug 2005
Posts: 776
Likes: 0
From: Virginia
Bikes: 2006 Specialized SWorks Tarmac; 2005 Bianchi Giro; 2005 Bianchi Cross Veloce; 1997 Litespeed Catalyst; 1983 Performance Steel
Originally Posted by TJHOO
#40
I have a nice pair of Burton mittens, but even with the knuckle zipper open my hands are too hot.
I'm currently in search of a mid-weight glove. What I've been using is an old pair of winter motorcycle gloves, but I made the mistake of washing them and now the liner is forever bunching around my fingers.
I'm currently in search of a mid-weight glove. What I've been using is an old pair of winter motorcycle gloves, but I made the mistake of washing them and now the liner is forever bunching around my fingers.
#41
Originally Posted by austinguy
I have been using the PI Lobster Gloves for two weeks. I normally get very cold hands. The Lobster gloves are keeping me warm down to about 18 for up to 1 and a half our ride. Dexterity is still ok. Loss of some dexterity but I can ride through traffic.
#42
When it's really cold, I wear Nashbar polypro gloves as my base layer, followed by army surplus sniper gloves, followed by army surplus mittens. I'll try to find pictures of the army surplus stuff.
The mittens are incredibly bulky, but I use barend shifters on my commuter so I really don't need fingers for much of anything. Truth be told, if it's cold enough for me to wear the army surplus mittens, I probably won't be shifting much anyhow.
[edit: found a picture of the sniper gloves, still looking for the surplus mittens.]

This is the closest picture I could find of the mittens I use. Mine are pretty different looking, but you get the idea.
The mittens are incredibly bulky, but I use barend shifters on my commuter so I really don't need fingers for much of anything. Truth be told, if it's cold enough for me to wear the army surplus mittens, I probably won't be shifting much anyhow.
[edit: found a picture of the sniper gloves, still looking for the surplus mittens.]
This is the closest picture I could find of the mittens I use. Mine are pretty different looking, but you get the idea.
Last edited by Old Dirt Hill; 01-18-07 at 09:17 AM.
#43
Spazzy Member
Joined: Sep 2006
Posts: 881
Likes: 0
From: t.dot
Bikes: '05 marinoni delta, '86/87 bianchi sport s(e)x, ? kona ?, raleigh '71, specialized crossroads
Originally Posted by Hezz
Here is an interesting idea. These are called wrist huggers. You could wear something like this over a thinner fleece glove or cycling glove to maintain dexterity and then add a glove shell to block the wind.
This would keep your palm and wrist area very warm as they would have a thicker amount of insulation and would keep the pulse area very warm. But because the fingers would have fewer layers more dexterity is maintained. These can be used under heavy ski glove or mittens also.
This would keep your palm and wrist area very warm as they would have a thicker amount of insulation and would keep the pulse area very warm. But because the fingers would have fewer layers more dexterity is maintained. These can be used under heavy ski glove or mittens also.
however, i was recently given a pair of lobster gloves from MEC and they've kept my hands toasty to the point of sweating...
for +0 c temps i'm still very happy with the skiing gloves i purchased at MEC a few years ago. they aren't padded, but have a nice leather palms and long wrists, made of light-weight wind-stopper material and cheaper too.
#44
ROM 6:23
Joined: Feb 2006
Posts: 1,713
Likes: 0
From: Coastal Maine
Bikes: Specialized Tricross Comp, Lemond Tourmalet, Bridgestone MB-5
I got these 180s running gloves last year. I love them because they aren't bulky and work in a wide range of temps, from 0F to 45F. the protective overmitt can be tucked away. They are just the right amount of warmth for commuting and active sports. They changed the palm material for this year, so don't know how it affects grip and warmth. Worth checking out though, and can be found at Dick's Sporting Goods and Sports Authority...
Last edited by flipped4bikes; 01-18-07 at 09:42 AM.
#45
I have some new balance running gloves that are pretty thin and I've been using those inside some Trek Lobster Gloves. When it gets down below 25, however, my fingertips still get pretty numb. I'm guessing that the Trek Lobster gloves are garbage compared to some of the other lobster style gloves. I think that's how it probably goes for most of their clothing.
I ended up buying some Seirus All Weather Gloves but haven't tried them out on the bike yet.
I ended up buying some Seirus All Weather Gloves but haven't tried them out on the bike yet.
#46
Senior Member
Joined: Feb 2005
Posts: 4,063
Likes: 1
From: Toronto
Again, this is one of these things where individual needs will be all over the map.
My hands stay pretty warm, and I can get away with just thin flleece gloves under a one-size-too-big pair of motoX gloves down to about -12C.
Colder and I go with MEC snowboard gloves, and my hands are always too warm in those.
My hands stay pretty warm, and I can get away with just thin flleece gloves under a one-size-too-big pair of motoX gloves down to about -12C.
Colder and I go with MEC snowboard gloves, and my hands are always too warm in those.
#47
Baby it's cold outside...
Joined: Jul 2005
Posts: 7,310
Likes: 1
From: SK, Canada
Bikes: Trek 5000, Rocky Mountain Wedge, GT Karakoram K2, Litespeed Tuscany
^^^ Agreed!
-12C this morning, and I rode to work wearing my TNF Windstopper gloves, which are very thin by winter glove standards. No problems....

In Autumn when we were road riding in -9C weather, I was still using my Fox full finger summer gloves for +3 hour, 100km rides.
Shown here during a summer rain commute to work.

Maybe I'll pay the price when I'm old and have arthritis
-12C this morning, and I rode to work wearing my TNF Windstopper gloves, which are very thin by winter glove standards. No problems....

In Autumn when we were road riding in -9C weather, I was still using my Fox full finger summer gloves for +3 hour, 100km rides.
Shown here during a summer rain commute to work.

Maybe I'll pay the price when I'm old and have arthritis
__________________
-Trek 5000* -Project Litespeed* -The Italian Job* -Rocky Wedge* -The Canadian Connection*
-Trek 5000* -Project Litespeed* -The Italian Job* -Rocky Wedge* -The Canadian Connection*
Last edited by ViperZ; 01-18-07 at 10:54 PM.
#48
Cheyenne Commuter
Joined: Jan 2007
Posts: 54
Likes: 0
From: Cheyenne, WY
Bikes: 1975 Peugeot UO8 (many, many upgrades ;-)
Originally Posted by MattMuney
what are the absolute warmest gloves you can buy? I bought a pair of descente gloves that my lbs said were the warmest ones they sold. they were fine in the 40s but once I wore them while riding in temps in the 30s and below my fingers were getting numb. What gloves do you guys use in tempatures of 30 farenheit and below?
#49
Senior Member
Joined: Aug 2006
Posts: 548
Likes: 0
From: Boston
Bikes: Jamis Coda Sport '06
Originally Posted by jcwitte
I ended up buying some Seirus All Weather Gloves but haven't tried them out on the bike yet.


The one issue I find with the mittens is that they make handling your brakes more difficult. You can either grasp the handlebars or rest your hand on the brake but not both at the same time. In traffic I tend to just accept the slight bit of instability and ride with my hand on the front brake and the other hand grasping the handlebar firmly.
#50
Sweetened with Splenda

Joined: Sep 2003
Posts: 2,335
Likes: 0
From: Brooklyn, Alabama
Bikes: Too many 80s roadbikes!
I use lobster claws down to 30 or so; I've worn the same plus military-surplus wool liners down to zero and been comfortable (except for my poor frozen toesies)





