Headset press adapters??
01-31-16 | 03:20 PM
#1
Thread Starter
Junior Member
Joined: Apr 2008
Posts: 161
Likes: 2
Headset press adapters??
I'm getting a new headset soon, but haven't decided what kind.
One factor that will affect my decision is the need for press adapters. I don't want to have to buy additional stuff. If I already have the Park HHP-2 press tool, will it work with any headset? Or are there some headsets I should avoid if I don't want to buy adapters?
This is for a regular 1 1/8" threadless headset.
Thanks!
One factor that will affect my decision is the need for press adapters. I don't want to have to buy additional stuff. If I already have the Park HHP-2 press tool, will it work with any headset? Or are there some headsets I should avoid if I don't want to buy adapters?
This is for a regular 1 1/8" threadless headset.
Thanks!
01-31-16 | 03:28 PM
#2
Banned
Joined: Jun 2010
Posts: 43,586
Likes: 1,380
From: NW,Oregon Coast
Bikes: 8
Probably Chris King .. their bearing holding portions come to a sharp edge so as to be a smooth Curve
when combined with the rest Of the upper Most Parts .. They do have an adapter available ..
Steel headset types of modest cost, You should Be Fine .
even with an All-thread Rod, and Nuts and washers, Press
when combined with the rest Of the upper Most Parts .. They do have an adapter available ..
Steel headset types of modest cost, You should Be Fine .
even with an All-thread Rod, and Nuts and washers, Press
