bike in accident, need help with repair
#1
Junior Member
Thread Starter
Join Date: Jun 2014
Location: Toronto
Posts: 19
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
bike in accident, need help with repair
hey i had an accident on my flite 100 and i think my rear stay is slightly bent now. not highly noticeable to the untrained eye. is it possible to fix this? its causing the wheel to spin marginally out of alignment. Also causing i to be slightly tight when mounting the wheel onto the frame (brand new rear wheel). so again wondering if it is possible to fix this? and also my front wheel was brand new before the accident and now it is also spinning slightly out of alignment. is it possible to retention the spokes on it and make it spin true again?
#3
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,399
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,699 Times
in
2,519 Posts
hey i had an accident on my flite 100 and i think my rear stay is slightly bent now. not highly noticeable to the untrained eye. is it possible to fix this? its causing the wheel to spin marginally out of alignment. Also causing i to be slightly tight when mounting the wheel onto the frame (brand new rear wheel). so again wondering if it is possible to fix this? and also my front wheel was brand new before the accident and now it is also spinning slightly out of alignment. is it possible to retention the spokes on it and make it spin true again?
#4
Banned
so did you do any measuring ? 1) find the centerline, 2), measure how far the drip-outs are from that Center line
just takin a picture of it is Meaningless.
The replicator is down.. try taking it into a shop.
just takin a picture of it is Meaningless.
The replicator is down.. try taking it into a shop.
#5
Senior Member
Join Date: Jan 2013
Posts: 2,681
Bikes: too many sparkly Italians, some sweet Americans and a couple interesting Japanese
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 569 Post(s)
Liked 584 Times
in
410 Posts
It all can be fixed with enough $. From what I have seen on Flite 100's they have pretty cheap wheels that might not justify a lot of shop time to get them operable again. Might be better to look for replacements. The frame can be checked and sorted out on a frame alignment table if you can find a frame builder in your area willing to do it for you. One of our local guys straightened a fork and a frame for me for $80.
#6
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,724
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5791 Post(s)
Liked 2,581 Times
in
1,431 Posts
Steel frames are easy to align, and respond very well to it. You can DIY, but take the time to research how it's done, and measure a few times before starting to "fix" the problem.
OTOH, if there's a decent bike co-op in town you might be fortunate enough to find a mechanic with the magic touch.
OTOH, if there's a decent bike co-op in town you might be fortunate enough to find a mechanic with the magic touch.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
Thread
Thread Starter
Forum
Replies
Last Post
bcpriess
Cyclocross and Gravelbiking (Recreational)
3
08-24-17 03:18 PM