|
Originally Posted by Insidious C.
(Post 19319966)
I need the NDS match to this guy, Raleigh/SR 165. Cosmetic issues are okay. I just need a usable match. PM if you have one.
|
Originally Posted by noglider
(Post 19320910)
I have a matching drive-side crank with the spider cut off and a 22-tooth freewheel cog bolted to it. If you or I remove the cog and bolts, it would look kinda sorta OK. You want it?
|
Looking for a stem and a bar for a project. Combo would be perfect! Either Cinelli 1A or 3ttt Record or similar. 115mm reach. Condition doesn't matter too much, as long as we're not talking cracks and all the hardware is present.
Have lots of stuff to trade, mostly older Campy parts and a lot of Campy hardware. Found what I need :) Thanks! DD |
Hello to all,
ISO: quill adapter for a threaded to threadless set up. Must be 25.4 stem dia. Great if it was black but will gladly accept the silver one too. Have: same thing but in a 22.2 size. One a Nitto and another no- name. Thanks for a chance! Got the adapter already... |
ISO: I have a 1952-ish Sturmey Archer FW hub and am missing the cog, and the part that holds the cog on. Would like to acquire either or both. Ideally, a 17 tooth cog would match the gear calculations I'm hoping to have, but wouldn't turn my nose up at an 18 or 16.
Have: many derailleurs, a few headsets, stems, used, gray GP4 rims in 36 hole, and a smattering of odds and ends, 2 ginormous old, sprung, leather saddles. |
Originally Posted by USAZorro
(Post 19323675)
ISO: I have a 1952-ish Sturmey Archer FW hub and am missing the cog, and the part that holds the cog on. Would like to acquire either or both. Ideally, a 17 tooth cog would match the gear calculations I'm hoping to have, but wouldn't turn my nose up at an 18 or 16.
Have: many derailleurs, a few headsets, stems, used, gray GP4 rims in 36 hole, and a smattering of odds and ends, 2 ginormous old, sprung, leather saddles. |
Pretty sure I have NOS 17/18/19 Fichtel & Sachs clones as well. Welcome to any you want if Neal can't help
|
Originally Posted by nlerner
(Post 19323837)
John, it's a standard cog and lock ring (as opposed to a threaded cog)? If so, I have lots of 18t SA cogs. Maybe even a 17t, but I'll need to check. Send me an email to remind me: lerner dot n at gmail dot com
https://c1.staticflickr.com/1/267/31...94db59fd_b.jpg |
Originally Posted by USAZorro
(Post 19323894)
Neal probably has this covered, but if not, let me know, I'm sure I have this stuff as well. |
Yeah, I got those parts. Remind me of your mailing address, John, either by email or PM.
|
Originally Posted by nlerner
(Post 19324205)
Yeah, I got those parts. Remind me of your mailing address, John, either by email or PM.
|
Originally Posted by Insidious C.
(Post 19319966)
I need the NDS match to this guy, Raleigh/SR 165. Cosmetic issues are okay. I just need a usable match. PM if you have one.
http://velobase.com/CompImages/Crank...FAA24F30B.jpeg |
crank arm found!
Well the ISO thread worked for me and a NDS crank arm is on it's way. Thanks everyone!
|
For trade: Bike Warehouse panniers
https://c1.staticflickr.com/1/736/32...a3b49de8_c.jpg The zippers all work. There's a small hole in one of the pockets where a reflector used to be. The other pannier has the reflector. I'm not really looking for anything in particular right now, mostly just trying to find a good home for these guys. I'd trade them for general purpose stuff like clamp on cable guides, maybe a seatpost. If you're in the Portland area I'd probably trade them for a beer and a good conversation. |
ISO: Suspension Fork Disc, 80mm VGC
26" Disc Wheelset Disc Brake Set How is this C&V you might well ask?I want to convert my 1994 Specialized FSR to disc. Also I HAVE: C & V Parts Schwinn Super Sport FRAME ETC |
Originally Posted by jeirvine
(Post 19318048)
What year is your Masi?
|
Originally Posted by gaucho777
(Post 19303219)
ISO: Wide-range, weight-weenie 5-speed or ultra-6 freewheel with alloy cogs from early- to mid-70s. Not set one specific model but something like an Everest, Zeus 2000, Mailiard 700 Pro, perhaps a Suntour Microlite. Avoiding two-prong Reginas. And the kicker: looking something with a bit of range, min 24t but preferably 26t+ low cog. Lower the better, while still minimizing weight. (I do also have a Suntour Cyclone GT long-cage RD in the wings for this project, so capacity isn't a concern.) Open to other non-alloy, high-end 5-speed/ultra-6 freewheels, as long as they aren't clunkers. I don't mind overhauling if the teeth aren't too worn. English threading. Thanks in advance.
Have: Lots of wheels, other freewheels, handlebars, hubs, lightly used tubular tires, racks, Avocet saddles, odds, ends, and other goodies. Too much to list. a 13-32 suntour 5 sp steel freewheel. The large ring is marked A 32. The front is marked AB. a 14-32 Suntour pro-compe 6 sp steel freewheel. The large ring is marked A 32. The front is marked XG. Would be interested in 27" 32 hole touring wheels (Matrix brand preferred), tubular tires, possibly an Avocet touring saddle, a light for use with a dynamo hub, panniers or a handlebar rack/bag e-mail: raam-qual@spottedowl.us |
Wanted: Purple LOOK Delta cleat pattern pedals. Model not terribly important but must be purple
Have other color LOOK pedals for trade as well as misc stems, consumables like tubes, etc. |
Originally Posted by brandon98
(Post 19326210)
Wanted: Purple LOOK Delta cleat pattern pedals. Model not terribly important but must be purple
Have other color LOOK pedals for trade as well as misc stems, consumables like tubes, etc. |
Originally Posted by tarwheel
(Post 19326307)
I have some dark metallic blue Look Delta pedals, and also some gray ones. They are a bit scuffed up but still work fine. Let me if you're interested. I don't use them anymore.
|
ISO banded front derailleur to fit a Klein Quantum II. Not a clamp but the metal band that tightens as you turn the bolt
|
Originally Posted by Falcon3
(Post 19327323)
ISO banded front derailleur to fit a Klein Quantum II. Not a clamp but the metal band that tightens as you turn the bolt
The pictured FD is not mine, but I have a cyclone mkII with the simialr band type attachment. If that's what you're looking for, let me know what you can offer for it and I can send pics of mine. |
Originally Posted by romperrr
(Post 19328061)
You mean something like this
The pictured FD is not mine, but I have a cyclone mkII with the simialr band type attachment. If that's what you're looking for, let me know what you can offer for it and I can send pics of mine. Yes exactly like that. Only problem is the Klein has an odd sized seat tube. I'll measure it and see if yours works. Thanks a lot! |
Originally Posted by Falcon3
(Post 19328391)
Yes exactly like that. Only problem is the Klein has an odd sized seat tube. I'll measure it and see if yours works. Thanks a lot!
|
Pretty sure I have a Cyclone or Alpha FD with a band as well. If so, it'll be a nominal 31.8 and from a Cannondale, so likely to be the right size for your Klein.
|
| All times are GMT -6. The time now is 03:57 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.
