|
Originally Posted by OldsCOOL
(Post 19290075)
Anyone?
|
Originally Posted by Chrome Molly
(Post 19291866)
51-52cm Schwinn 434 (with post) interest you?
|
ISO: wheel with a shimano 600 6400 series that will fit an 8 speed cassette. Looking to upgrade my 7 speed. Thanks.
|
Originally Posted by tjcough
(Post 19292799)
ISO: wheel with a shimano 600 6400 series that will fit an 8 speed cassette. Looking to upgrade my 7 speed. Thanks.
What kind of 7speed hub do you have? The freehubs are interchangable. See [MENTION=45515]rcc[/MENTION]adr post earlier http://www.bikeforums.net/classic-vi...heelset-2.html #27 Joe |
Originally Posted by tjcough
(Post 19292799)
ISO: wheel with a shimano 600 6400 series that will fit an 8 speed cassette. Looking to upgrade my 7 speed. Thanks.
-John |
Looking to make a couple parts whole again. ISO:
- Campy aero toe clip (or a pair) — curved mount. - Plate for Cinelli 1R stem HAVE: - Campy aero toe clips — straight mount. - Cinelli 1R stem missing plate - Other stuff… |
Have: Shimano XT FD-M751 silver 31.8 very good
Suntour X-1 f.d. 28.6 new Want: Simplex Raid Export 32 rear derailleur (2nd version) |
Originally Posted by jethin
(Post 19296430)
Looking to make a couple parts whole again. ISO:
- Campy aero toe clip (or a pair) — curved mount. - Plate for Cinelli 1R stem HAVE: - Campy aero toe clips — straight mount. - Cinelli 1R stem missing plate - Other stuff… |
Originally Posted by HamboneSlim
(Post 19256529)
ISO:
Campy NR: seatpost 27.2 top tube brake cable clamps downtube cable guide downtube clamp on shifters, or just the clamp Rear derailleur, or just the spring barrel housing with the stop pin chainstay cable stop also, 700c clincher rims, 15-18mm internal width for 25-28mm tires Have to trade: http://www.darkhollowdulcimers.com/trade1.jpg 4 Conti tubes, 26 x 1.75 - 2.5,presta valves threaded stem Koolstops, one pack of red opened, but unused Campy Grand Tourismo RD, VGC, except cracked plastic spring cover heavy black leather VO mudflap, unused Brooks B67 honey with chrome springs, light use for 4 months, too wide for me Shimano hubs with skewers, 126mm rear, front one polished up nice; need cleaning and lube shiny new dork disk http://www.darkhollowdulcimers.com/trade3.jpg Simplex chainguard, unused Raleigh branded brakes with Weinmann levers with dia-compe wings, missing clamp blocks Weinmann 610 Vainqueur 999 brakes and levers, missing 1 clamp block Shimano lever VO townie lever Simplex Delrin clamp-on shifters, intact, need cleaning and lubrication Avocet Touring II saddle, scuffs, scratches, and fly specs, otherwise good shape with many miles left in it http://www.darkhollowdulcimers.com/trde2.jpg Pletscher brevet card holder clamp, attaches to stem bolt Chinese bottle generator, looks good and works fine |
ISO: Suntour Superbe Pro crankset.
I'm forced to use the OEM bb on a build that was spec'd with Superbe Pro. Looks like the FD and the BB and the chain line will need that crankset. I'm not complaining, the build is a challenge, a privilege, and my Plan A, B and C are close to irrelevant. Have: DA 7410 crankset (last square taper by DA) Other stuff. |
Originally Posted by AustinFitz
(Post 19297290)
Any chance you'd part with that silver front rack on the far right in that last pic? I've been looking for something just like that to match the rear rack that came on my Centurion Elite GT.
|
Originally Posted by Stevensb
(Post 19266748)
I need the cable stop / adjuster for a Suntour GT RD. Anyone got one they can spare?
|
I have a single "aero color" brake lever, silver, apparently for the left side of the handlebar. Does anyone have an orphan right side one?
|
3 Attachment(s)
Originally Posted by Iniezione
(Post 19283450)
ISO plastic Simplex Criterium derailleurs in good condition. My bike does not have dropouts with a hanger, so I would need the RD to have one.
If anyone is looking for GB randoneur bars, I have a set off of a Raleigh Gran Sport, in good condition. |
ISO Tricolor Front Hub HB-6400 x 32
Have Ultegra Front Hub HB-6500 x 32 Nice condition, looks to have been laced once, Ultegra stenciling removed - no skewer Anyone looking to swap?>>>>>>>>>>>done! Thanks for the swap [MENTION=234414]lasauge[/MENTION] !! |
Biopace II fans? swap egg-shaped rings for round
Some of you actually love these egg-shaped rings, but the owner the Mtn. bike I'm working on does NOT want these and would prefer round rings (which I don't have on-hand) so...
HAVE: Set of 3 steel Biopace II (AFAIK) rings off an Exage crankset, 48/38/28, They have some wear but near zero rust and seem to have plenty of life left...being steel, natch. These have some subtle "ramps" stamped in and some odd tooth shapes to help shifting. 110BCD for the 2 large and 74BCD for the small, these are fairly light for being steel, matte silver finish. ---Pics to come when my camera charges.--- NEED: same or similar set of 3 ROUND rings in alloy or steel, or a combo. 2 larger 110BCD rings only will be considered. Color not too important. Straight swap including shipping is my goal, but this can be discussed. |
I have 2 larger (52/42?) chromed steel round 110 rings vgc if you're interested. I'm willing to work something out, but I'm not interested in the BP rings.
Originally Posted by unworthy1
(Post 19299775)
Some of you actually love these egg-shaped rings, but the owner the Mtn. bike I'm working on does NOT want these and would prefer round rings (which I don't have on-hand) so...
HAVE: Set of 3 steel Biopace II (AFAIK) rings off an Exage crankset, 48/38/28, They have some wear but near zero rust and seem to have plenty of life left...being steel, natch. These have some subtle "ramps" stamped in and some odd tooth shapes to help shifting. 110BCD for the 2 large and 74BCD for the small, these are fairly light for being steel, matte silver finish. ---Pics to come when my camera charges.--- NEED: same or similar set of 3 ROUND rings in alloy or steel, or a combo. 2 larger 110BCD rings only will be considered. Color not too important. Straight swap including shipping is my goal, but this can be discussed. |
Jethin, thanks for the offer of the 2 rings but since posting this I realize I need to check with the owner and see if she's going to be OK with the slightly higher gearing and lack of the 28t "granny"...I was making an assumption this would be fine. Let me get back to you after I check.
UPDATE: She wants to have the "same" gearing as before with the Biopace rings so am looking for a set of 3: 48/38/28 (although just between us she won't ever count the teeth so if there's a little discrepancy it should be OK...;) |
ISO: Wide-range, weight-weenie 5-speed or ultra-6 freewheel with alloy cogs from early- to mid-70s. Not set one specific model but something like an Everest, Zeus 2000, Mailiard 700 Pro, perhaps a Suntour Microlite. Avoiding two-prong Reginas. And the kicker: looking something with a bit of range, min 24t but preferably 26t+ low cog. Lower the better, while still minimizing weight. (I do also have a Suntour Cyclone GT long-cage RD in the wings for this project, so capacity isn't a concern.) Open to other non-alloy, high-end 5-speed/ultra-6 freewheels, as long as they aren't clunkers. I don't mind overhauling if the teeth aren't too worn. English threading. Thanks in advance.
Have: Lots of wheels, other freewheels, handlebars, hubs, lightly used tubular tires, racks, Avocet saddles, odds, ends, and other goodies. Too much to list. |
Looking to trade my VGC Shimano Deore XT (M736) top pull front derailleur for your bottom pull of similar condition and vintage.
|
Originally Posted by jcb3
(Post 19299554)
ISO Tricolor Front Hub HB-6400 x 32
Have Ultegra Front Hub HB-6500 x 32 Nice condition, looks to have been laced once, Ultegra stenciling removed - no skewer Anyone looking to swap? |
HAVE:
2015 Soma Rush Frameset (57cm) https://s28.postimg.org/5ur0ps7xp/IMG_0189.jpg ISO: A 57-59cm quality steel frameset with good tire clearance, eyelets for fenders and racks, and good paint condition. Want to build a tourer! |
ISO Campy Chorus 9 speed RD for a friend, his has a crack in the main body.
|
ISO suntour power thumb shifters for upright bars. Need just the right shifter (preferred) or a set.
Like these... VeloBase.com - Component: SunTour LD-2800 Power Thumb Shifter Have lots to trade. |
Originally Posted by twolve
(Post 19312907)
ISO suntour power thumb shifters for upright bars. Need just the right shifter (preferred) or a set.
Like these... VeloBase.com - Component: SunTour LD-2800 Power Thumb Shifter |
| All times are GMT -6. The time now is 03:41 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.