Bike Forums
Page 72 of 73
« First
22
62
70
71
72
73
Show 30 post(s) from this thread on one page

Bike Forums (https://www.bikeforums.net/forum.php)
-   Classic & Vintage (https://www.bikeforums.net/classic-vintage/)
-   -   ISO and For Trade thread part 4 (https://www.bikeforums.net/classic-vintage/1071409-iso-trade-thread-part-4-a.html)

Bioflamingo 02-07-18 11:31 AM
ISO Trek 750 Multitrack
 
1 Attachment(s)
I am looking for a 56cm Trek 750 like this one I used to have years ago. Would be interested in a complete bike or just a frame/fork since I plan on customizing it anyway. I’ll gladly pay for shipping to KS as well. Would prefer this color, but any color will work. Thanks!

dweenk 02-07-18 01:30 PM
Originally Posted by Bioflamingo (Post 20156002)
I am looking for a 56cm Trek 750 like this one I used to have years ago. Would be interested in a complete bike or just a frame/fork since I plan on customizing it anyway. I’ll gladly pay for shipping to KS as well. Would prefer this color, but any color will work. Thanks!
My son has a 730 that he doesn't use much any longer, but it is about 53cm.

hamperbunny 02-07-18 02:52 PM
Superbe Pro post 27.2
 
Looking for a Superbe Pro 27.2 post for a build. Alternatively, something Japanese that would fit a superbe pro build. Not a big fan of the laprade...

Ex Pres 02-07-18 04:51 PM
ISO:
Normandy 24 spline freewheel remover. I see them on ebay @ $27 shipped. Anyone have a nice used one collecting dust?

noglider 02-07-18 06:48 PM
Originally Posted by Ex Pres (Post 20156767)
ISO:
Normandy 24 spline freewheel remover. I see them on ebay @ $27 shipped. Anyone have a nice used one collecting dust?
Yes. The big kind?

Ex Pres 02-07-18 07:36 PM
Originally Posted by noglider (Post 20156957)
Yes. The big kind?
Yes, it has a large circumference, big hole in the middle.
(ebay pic)
https://i.ebayimg.com/images/g/alMAA...uQ/s-l1600.jpg

noglider 02-07-18 09:28 PM
My tool is upstate. If you can wait for me to grab it on the 17th, send me an email to tom@noglider.com.

dweenk 02-08-18 02:41 PM
ISO Suntour or equivalent downtube cable stop
 
ISO a clean Suntour downtube cable stop for barcons or stem shifters. A Shimano would be OK as well.

Have bits for trade bait.

3speedslow 02-08-18 03:07 PM
[MENTION=336348]dweenk[/MENTION]

Suntour cable stop, PM to you.

bwilli88 02-08-18 10:12 PM
Looking for a junk Aero Suntour shifter set, just need the base and screws.

johnnyspaghetti 02-09-18 05:37 AM
Free
 
1 Attachment(s)
1958 Robin Hood Sports step thru bare frame. 23" It's a straight, Raleigh built, in Minneapolis.

Attachment 598768

3speedslow 02-09-18 10:51 AM
1 Attachment(s)
[MENTION=348967]J.Oxley[/MENTION]

Cyclone FD

3speedslow 02-09-18 10:56 AM
1 Attachment(s)
Try again

Iowegian 02-09-18 03:10 PM
Originally Posted by bark_eater (Post 20152066)
Bumping this and updating a bit. I had a kind offer of a rack set, but it looks like the wrap around front rack will not work with the Dia-Comp brakes. So I'm still looking but will need a front rack with a center brake bolt tang, which would be the same as the rear rack. Or just a set of low-riders...
I have a set of the low-riders. Also have a matching front wrap-around and rear rack but it is the 2 prong type. I might have a single center mount but would have to check. No front center mount though. Let me know if you're still looking for the low-riders.

Fahrenheit531 02-09-18 05:14 PM
[MENTION=207730]3speedslow[/MENTION] -- I do believe I could give that mech a shiny red home. :)

3speedslow 02-09-18 05:38 PM
Originally Posted by J.Oxley (Post 20160941)
[MENTION=207730]3speedslow[/MENTION] -- I do believe I could give that mech a shiny red home. :)
Then, from one Schwinn to another!

bark_eater 02-11-18 08:51 AM
Originally Posted by Iowegian (Post 20160737)
I have a set of the low-riders. Also have a matching front wrap-around and rear rack but it is the 2 prong type. I might have a single center mount but would have to check. No front center mount though. Let me know if you're still looking for the low-riders.

Hi, I 've been bouncing around the last couple of days,. I'm definitely interested in the low rider and a single point rack if you can find one. I sent you a PM. Thanks, Woody

9volt 02-11-18 11:30 AM
I should have an extra single point rear rack if you end up needing a rear.

bark_eater 02-11-18 03:10 PM
Thanks.

noglider 02-12-18 03:33 PM
I bent the axle in my fixed gear hub. I assume it's generic threading. Anyone have a spare?

I have brake calipers, derailleurs, tires, etc.

USAZorro 02-13-18 08:16 AM
Originally Posted by noglider (Post 20165939)
I bent the axle in my fixed gear hub. I assume it's generic threading. Anyone have a spare?

I have brake calipers, derailleurs, tires, etc.
What dropout spacing does it need to support?

Solid, or QR?

noglider 02-13-18 08:18 AM
Originally Posted by USAZorro (Post 20166986)
What dropout spacing does it need to support?
I think 120mm. Thanks.

tarsi 02-13-18 08:56 AM
ISO: SunTour XC Pro Cantilever Brakes
 
Looking for SunTour XC Pro Cantilever brakes. Will consider black or silver.

Have tons of stuff to trade or can buy straight out. Please let me know.

jeirvine 02-13-18 09:40 AM
I am currently ISO:

> Campy NR/SR Strada 172.5 no-date or 73 drive side arm
> Avocet Strada 170 NDS arm
> Sugino Mighty Tour 170 NDS arm

I have a bunch of orphan arms and things to trade on the orphan parts spreadsheet. Take a look, and add your orphaned stuff.
https://docs.google.com/spreadsheets...it?usp=sharing

johnlink 02-15-18 01:25 PM
I'm looking for 28T Uniglide cogs.


All times are GMT -6. The time now is 02:26 AM.
Page 72 of 73
« First
22
62
70
71
72
73
Show 30 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.