Thank you.
I have this 3TTT @ 145mm for fitment & slumming it. Plastic bit lost on a dirty dusty sandy trail by a weary rider.
Found affordable silver Cinelli 130 for a trial fitment as well. Recycled Cycles Seattle

Found

41T are $$$$ I may have a 42T, but it may be Sakae. Has been years since I checked.

Found

I have an NR 41T ring, in good condition, some scratches, nothing major or deeply marring the ring. All teeth are in excellent condition, also.

Its yours if you can use it Narhay, PM me where its to be sent, I see you are in BC Canada, no problems there for me.

Its definitely one of those shameful Asian understudy parts, Campagnolo all the way.

Bill

Wanted to trade:

1. My Campagnolo thick BB cups for your thin. I have a spare pair or two of Italian NR/SR r1fled/thick cups, and I need a pair or two of English thin cups.

2. My Campagnolo 2-bolt 27.2 NR seat post for yours in 26.6. (Or my 2-bolt SR Sakai 27.2 for yours in 26.6)

Thanks - John

Ultegra 600 Tricolor crank arms trade
 

Have Ultegra 600 Tricolor 170 mm crank arms. Seeking 175 mm in similar condition.

Looking to trade just the crank arms, not the chain rings, bolts, or dustcaps.

https://c1.staticflickr.com/6/5666/3...7f2025b380.jpgPanCranks

CL here (Raleigh) often has orphan Race wheels. I'm not sure why.

ISO: Araya 700c rims or similar Japanese rims, 36h and clincher preferably. I have a campy RD, shimano 600 Arabesque cranks, Miche competition hubs and some other misc.

Any spare decals in your stash? Looking for one Vitus 888 tubing decal to finish a minor detail on one of the kids bike.
Not picky, vinyl or water applique. Prefer the early version but a later style will work.

Have for trade, your choice pair nice chrome Motobecane in vinyl (various sizes) or perhaps pair of Columbus fork in water applique. Might have other odd's too.

Prefer:
[IMG]https://c2.staticflickr.com/1/604/31...3a23085f_o.jpgearly vitus 888 by carrera247, on Flickr[/IMG]

This will work as well:
[IMG]https://c7.staticflickr.com/1/455/31...1e759dba_o.jpglate vitus 888 by carrera247, on Flickr[/IMG]

For the kids vinti junior racer :)
[IMG]https://c4.staticflickr.com/1/604/31...8100e0da_z.jpgbefore and after 1978 faux Team BiC - Ocana tribute by carrera247, on Flickr[/IMG]

ISO 126mm spaced Nuovo Record rear hub with skewer, maybe a matching front hub. No pits in bearings. I might go with a generator front hub but we will see what I can rummage up.

Also potentially interested in a complete NR high flange tubular wheelset, stainless DB spokes, no rim damage, good cosmetics, so if you've got something let me know.

Also have a new production honey brooks B17, less than 200km of use. Some clamp indents on the seat rails but otherwise in excellent condition. Looking for a brooks professional in similar condition. Can make up the difference somehow.

As always, in the best condition possible.

I'm searching for a matching pair of AGC250 Gran Compe aero brake levers, mid-late '80s, silver levers and decent black hoods. OR a good Right solid lever/hood. My Miyata 710 has mismatched levers - a slotted right lever with chewed up hood, and a solid L lever with a good hood. I don't care if the levers are slotted or plain.

I've seen a set on the bay site, but those have the incorrect hoods.

PM sent on above, but I have no hoods.

ISO: 25.4 Nitto B115-420 or 26.4 Cinelli 64-42.

Have: Assorted stuff. We can talk.

ISO:


Campy NR:
seatpost 27.2
top tube brake cable clamps
downtube cable guide
downtube clamp on shifters, or just the clamp
Rear derailleur, or just the spring barrel housing with the stop pin
chainstay cable stop

also, 700c clincher rims, 15-18mm internal width for 25-28mm tires

Have to trade:

http://www.darkhollowdulcimers.com/trade1.jpg

4 Conti tubes, 26 x 1.75 - 2.5,presta valves
threaded stem Koolstops, one pack of red opened, but unused
Campy Grand Tourismo RD, VGC, except cracked plastic spring cover
heavy black leather VO mudflap, unused
Brooks B67 honey with chrome springs, light use for 4 months, too wide for me
Shimano hubs with skewers, 126mm rear, front one polished up nice; need cleaning and lube
shiny new dork disk

http://www.darkhollowdulcimers.com/trade3.jpg
Simplex chainguard, unused
Raleigh branded brakes with Weinmann levers with dia-compe wings, missing clamp blocks
Weinmann 610 Vainqueur 999 brakes and levers, missing 1 clamp block
Shimano lever
VO townie lever
Simplex Delrin clamp-on shifters, intact, need cleaning and lubrication
Avocet Touring II saddle, scuffs, scratches, and fly specs, otherwise good shape with many miles left in it

http://www.darkhollowdulcimers.com/trde2.jpg

Pletscher brevet card holder clamp, attaches to stem bolt
Chinese bottle generator, looks good and works fine

Need a braze on triple road front derailleur, preferable suntour blaze but any triple braze on road fd should work.

Have: all kinds of stuff

Have: unused waterslide English Reynolds 531 decals, seat tube decal and 2 fork blade triangles.. These are best for clearcoating over as they are relatively thin and fragile:

http://cyclomondo.net/USERIMAGES/Reynolds%20531.jpg

Want: The same, but in a more durable version that can go over a clearcoat.

Looking for a 9 speed Chorus or Record rear derailleur.


Anybody have one they can let go of?

Suntour
 

https://c8.staticflickr.com/1/679/31...aa86459f_h.jpgSun tour RD cable adjuster by BJ Stevens, on Flickr


I need the cable stop / adjuster for a Suntour GT RD. Anyone got one they can spare?

Thanks.

Brad

ISO: Black 80-100mm Quill Stem for a 1996 Cannondale R400

ISO: 9 speed downtube shifters. I think Shimano's Dura Ace version is the only kind available - nobody else seems to make 9spd DTs. I have a few parts I could trade for them - including a set of 9 speed Ultegra brifters. Can PM a list to anyone who's interested. Thanks a lot.

Does anybody have the cable stop/barrel adjuster for a Dia Compe ACG-300 rear brake?

They're the same as Campagnolo, SunTour Superbe, etc.

https://365cycles.com/media/catalog/...r/br9870_1.jpg

Campagnolo Adusting Barrel and Nut, Round Adjuster | 365 Cycles

This Jagwire unit ought to work, but isn't quite as good a cosmetic match and I don't have a sample to test in my caliper:

https://images-na.ssl-images-amazon....XWt%2BuGrL.jpg

https://www.amazon.com/Jagwire-Bicyc...arrel+adjuster

ISO Suntour Symmetric clamp 31.8 , i have the shifter just need the clamp . Thanks .
SUNTOUR 6 SPEED SHIFTERS ROAD BICYCLE SHIFT LEVERS SYMMETRIC CLAMP TYPE RACING | eBay

ISO small Cannondale frame near 50cm. More particular to size than geometry.

What do you need? I may have it.

ISO: Christophe medium toe clips, i.e. like the pic with just "'CHRISTOHPE" in script on the top. Please let me know if you have any, seem to be plenty of small and a few large on the interweb but can't find any medium.