WTT my 90mm 3ttt black quill stem in nice shape for your same in 110mm.

Also have a Bianchi labeled ITM stem that appears to be for straight bars, silver, 25.4mm

I've got a 100. Yours a 25.4? I need a 26 in black/grey ano

It's actually a 34.8. And Klein made the tubing so thin that the standard clamp will crush the tubing as the pressure isn't as diffuse as a band. (I've got another Quantum II with a crushed seattube to prove it)
Any suggestions?

I've got this stuff if anyone needs it.

Crankset, good condition, I've got the BB that came in the bike but lost some of the loose ball bearings.

https://s6.postimg.org/s9hnnf1a9/20170121_212713.jpg
free pic
https://s6.postimg.org/6ockzt4jl/20170121_212730.jpg
free pic
https://s6.postimg.org/nq5f1wjep/20170121_212735.jpg
free pic

FD
https://s6.postimg.org/61i9o0x1d/20170121_212941.jpg
free pic


RD
https://s6.postimg.org/abwxjm24h/20170121_212952.jpg
free pic


Suntour DT shifters, everything is there, I took them off the frame and bagged each piece.
https://s6.postimg.org/6gtjh1iyp/20170121_213005.jpg
free pic


A set of pedals. Say made in Germany
https://s6.postimg.org/62wsv6o8x/20170121_213416.jpg
free pic
https://s6.postimg.org/t5nbucpq9/20170121_213439.jpg



The only thing I'm actually needing is an Italian bottom bracket. I have a "low miles" 6700 bottom bracket that I'd trade (seller's claim, it came with my 6700 group). It does have some wrench marks but they are slight/hardly noticeable.
https://s6.postimg.org/yoc36cim9/20170121_212607.jpg
image url upload

image url upload

I'd also trade for a set of Crank Brothers pedals. Any model would be fine, thinking about using my MTB shoe when riding the Simoncini and they have Crank Brothers cleats. Also have some SPD pedals. Look new, I don't remember where they come from but I didn't see a name on the so I assume they are generic. New or like new
https://s6.postimg.org/dexnmzh35/20170121_213344.jpg



I don't need any of this stuff, if someone does and doesn't have anything to trade on just let me know, we'll work something out. I'd rather they be used then sit on the self here in the way.

Well, you're a possibility. I'd prefer a 110 if someone offers one up. Mine should be a 26.0, and that what I need. I should double-check, though.

EDIT: yours isn't black, nor 26.0, so it won't fit for me. Free game for anyone else. Thanks.

Here's some photos of mine. And if ex pres doesn't want it ISO black/grey ano stem with 26.0 clamp
Have this to trade. 100mm and 25.4 clamp


. https://i.imgur.com/RskiFET.jpg
https://i.imgur.com/fiRy7Z9.jpg
https://i.imgur.com/T1FOHf7.jpghttps://i.imgur.com/amdH63i.jpg

Seeking good condition mid-grade 32h hubset (Sunshine, Maillard, other), 126mm spacing on rear, English threaded for freewheel, w/ matching skewers, polished silver.

Misc to trade in return, LMK needs.

UPDATE: have a set (or two!) coming - thanks all.

What did Klein use as standard? I'd be tempted to use a 34.9 clamp on FD, maybe with some old inner tube under the clamp, and tighten very gently. Have a 34.9 Sora you are welcome to. Could be your other Klein was subjected to an attempted 31.8 clamp install...

ISO-7400 skewers-front and rear, 7800 skewers-front and rear


Have many things for trade. Ask me.

No idea what goes on with these Kleins. Proprietary press fit bottom bracket, weird front derailleur mounts. I had an 81 Klein Performace that had a hole in the seat tube where you lowered a specific nut shaped to the diameter of the tube on the inside then inserted the bolt through the hole to mount the front derailleur. The non dented Klein of mine had a Campagnolo Chorus adjustable band derailleur on it. I'm guessing they tried to mount that to the other one I bought from the same guy. Problem is the clamp only extends to 33mm diameter.

WTT A Chorus/C Record Seatpost (for the life of me I can't tell them apart) 27.0 for a 27.2.

Thanks Chrome Molly :thumb:

Wanting to trade for a particular fork if anybody has one.

Needs to be - any colour
- MTB
- steering 170-175mm
- rake 45 or close
- 1 1/8 steerer
- crown to axle 385mm or close
- decent tubing, forged dropouts

Anything out there available in BF land?

Have lots to trade... Thanks!

Anyone got French freewheels they want to part with? LMK if you have something and would be interested in trading for something in English thread. Shoot me a PM, please.

I believe I have one or two. I don't pay them much attention most of the time so I can't swear to it yet.

I believe I've got a Sachs 8 speed in English thread.

I am an idiot. First I need French thread. And I thought I had stated I wanted standard 6-speed. But I know now I did not. Something narrower band than 13 or 14-26. Sorry for the confusion.

Apologies to @mountaindave and @jimmuller who PM'd.

Hi, I´m looking for early 60s Huret parts for my 1961 road bike restoration project. I´ve been looking on eBay without any lucky findings.

I have a bag of parts pulled from an early 60s Raleigh road bike. I thinks the mechs are Huret, but need to check. Do you know what model you're looking for?

Hello! That´s cool! Please send me pics of what you got. What model?

Yep. I think I have a set. If you're still looking, send me a pm.

I just saw your other thread, and I don't think I have what you're looking for. The Huret parts I have are definitely low end.

Quote:
Originally Posted by KrNome View Post
Hello! That´s cool! Please send me pics of what you got. What model?
I just saw your other thread, and I don't think I have what you're looking for. The Huret parts I have are definitely low end.

I see! That´s too bad!

ISO French headset for my Peugeot PH11 from 1984. The one on there is indexed to hell. Not wanting to invest much, but let me know what you have.

Looking for a Mavic Module 3 -36 hole 27 1/4" wheel. I have lots of stuff or $.