Hi all,

I am looking for this unicorn, Grey / pink 52 cm to 54 cm from the mid/late 80's I think. Thanks.

This is a very specific request, so I've already tempered my expectations, but I'm seeking one GB Arret brake lever like the one in the attached photo. I have a decent amount of parts for trade, just let me know what you're seeking.

This looks like something [MENTION=73614]rhm[/MENTION] or [MENTION=45088]nlerner[/MENTION] may be hoarding. Btw, this is a for trade thread. The mods come down hard on sales, so please edit your post. You can use euphemisms like "other items of interest. "

Not something I have, unfortunately, though I do have an orphan red-anodized 1960s-era GB brake lever.

That was fast. Do you just lurk behind me at all times?

It's called, "trying to avoid the work I really should be doing."

Got a few things I'm looking for that I could probably go buy at the store, but in the spirit of making connections I'd prefer to trade.

Chrome MKS dust cap for their Sylvan Touring pedals
(got the other stuff)

I've got a fair amount of stuff for trade, probably easier if you ask me than I ask you.

Used Schwinn Bicycle

Thanks for the leads, I've already been in contact with [MENTION=73614]rhm[/MENTION] and he had a pair of the later red anodized levers, but none of this earlier model.

And apologies about the cash reference, I've seen posts offering "portraits of dead presidents, green pieces of paper, etc." so it didn't seem too frowned upon as long as items were offered for trade as well. I've edited the post to remove any mention.

ISO: 26.6 seatpost

I have trade bait. What do you need?

Looking around for some nice looking Shimano 9-speed MTB parts

Black long cage derailleur 34T or 36T capacity if possible, Deore or better hopefully
Right hand Trigger shifter
GOT Cassette with 34 or 36 big cog if possible
GOT New 9-speed SRAM chain with Powerlink

Trade bait, STUFF ADDED AND PHOTOS:
NOS Origin8 Citi Bars retail card, photos below
bars2_zpstiqrwuw1.jpg Photo by djeasygo | Photobucket
bars1_zpsi6cbh00m.jpg Photo by djeasygo | Photobucket
Miyata touring fork with canti posts, blue, 1024 tubing, photos below:
Miyata Touring Fork by Don Baker | Photobucket
80mm Dura Ace quill stem with hidden bolt, photos below:
Dura Ace Stem 80mm by Don Baker | Photobucket
Shimano 600EX 6-Speed Corncob Freewheel from 87 Trek 560EX Pro Series, some wear, photos below
IMG_2928_zpscjfvp4uz.jpg Photo by djeasygo | Photobucket
IMG_2930_zpsor8obbx6.jpg Photo by djeasygo | Photobucket
NOS Sella Italia road saddle with anatomic cutout
https://s83.photobucket.com/user/djea...igcwv.jpg.html
https://s83.photobucket.com/user/djea...ef3o5.jpg.html
GONE NOS Michelin 23c road tires, photo below:
mich1_zpspb2wjy4s.jpg Photo by djeasygo | Photobucket
GONE Barely used Conti Ultra Sport set 700x23, photo below
mich3_zpsyklgicyp.jpg Photo by djeasygo | Photobucket
NOS CST Compressor tires 700x23, a bit dusty, photo below
mich4_zpsageuobab.jpg Photo by djeasygo | Photobucket
NOS CST Fixie Tires 700c RED or BLUE or YELLOW
New Weinmann road front wheel

I might have your cassette and chain, sent ya a PM.

Emailed, thanks!

[update - got it covered - thank you!]
ISO:
The use of your crank puller for TA cranks. I will very possibly only need this once so I hope to not have to buy one.

I can offer:
I have some nice old stock stainless cables, cheap black "cork" bartape, and plenty of other odds and ends that I would be happy to offer for the use of your tool. Let me know what you might want. I think it's appropriate that the person who invested in the tool gets something in return for it... like a "rental". And I'll pay for shipping.

Thanks,
Andrew

I have a ca. 1985 Sugino (with the height measurement markings), and I'm pretty sure I have something nice and Italian as well (ITM maybe? Or was it San Marco? Fluted/polished, if I recall?). Shoot me an email and I will shoot pics, check details.

Not sure what I need right now that might be reasonable in trade. Always on the lookout for nice steel stems (e.g. Salsa, Ritchey Force; either threaded or threadless), and am currently seeking a good-quality 102-104mm cartridge BB for BSA shell, as well as any interesting green-anodized MTB bits and pieces and/or cool canti hangers. Probably need other stuff, but that's top of mind. Happy to even out any otherwise assymetrical trade options as required.

I'm located in Canada, but will be down in Point Roberts, WA on the 6th and can mail US domestic at that time.

mikemowbz AT hotmail DOT com

PM me, I can loan you my Park CCP-1 that has one-side-for-TA...

LF: Campagnolo Nuovo tipo high flange rear hub, preferably 120mm. Let me know what you have.

ISO: Uniglide cassette with 28 or 26 tooth large cog, 6 or 7 speed.

Have: Uniglide cassette 13-21, excellent. Other stuff...

I have one that came off of an 81 Voyageur. Gold wash is a bit worm and still has grease on the back of the cogs so needs a good cleaning . 13 to 28 6 speed. I can check the parts bin at my lbs next weekend. I seem to remember one or two sitting in the box? You can have this one for free if you want it? I know it is not so pretty anymore.

ISO: beater FD for a science project.

Looking for 28.6mm clamp, SunTour or 1980s/1990s Shimano with minimal steel parts, but cosmetically-challenged or with a broken spring, so that I'd really be saving it from the trash. I'm envisioning something like a SunTour ARx, or Shimano RX100/1055.

Whatcha got?

ISO: the plastic insert for a Suntour downtube shifter. It's the round plastic washer that is cut out in the shape of the shifter boss. I dropped one into the abyss below my deck and cannot find it.

I have a couple of semi trashed ones that I can't bring myself to throw out. One has a stuck bolt (mountaintech?). One has bad threads (xc pro). I might have something that actually works, too. I'd send you at least two, and if I have one that actually works that is sort of beaterish, I'll include it. I'll need to open up the vault

That would be wonderful! Standby for a PM.

I also have science project derailleurs. Email me.

Done!