Accessories and bags for a vintage mixte?
#1
New but Nice
Thread Starter
Accessories and bags for a vintage mixte?
As mentioned in another thread, I got this 1981 Fuji S12-S mixte from a local bike builder who built it up from a frame hanging in his barn. I don't intend it as a daily shopping/exercise/etc. bike, but more of a good weather/parade bike.
But still: I will want emergency supplies/tools and some water when I ride.
The frame doesn't have braze-ons in the front triangle, so I'm not sure where to hold a water bottle. I would consider a triathlon-style seat-post bottle cage, but the seat-post is probably the best bet for storage of tubes and patches and whatnot. I'd swap that for a handlebar bag, but between the cables and the safety levers (which I'm keeping, I know, I know), there isn't really room. Similarly, a stem-mounted bottle holder really won't work with the shifters.
Am I condemned to just wear a jersey and stick a bottle in a pocket? Or are their solutions I'm not considering? Happy to look into any recommendations, especially things that are Fuji/80s appropriate!
Thanks!
But still: I will want emergency supplies/tools and some water when I ride.
The frame doesn't have braze-ons in the front triangle, so I'm not sure where to hold a water bottle. I would consider a triathlon-style seat-post bottle cage, but the seat-post is probably the best bet for storage of tubes and patches and whatnot. I'd swap that for a handlebar bag, but between the cables and the safety levers (which I'm keeping, I know, I know), there isn't really room. Similarly, a stem-mounted bottle holder really won't work with the shifters.
Am I condemned to just wear a jersey and stick a bottle in a pocket? Or are their solutions I'm not considering? Happy to look into any recommendations, especially things that are Fuji/80s appropriate!
Thanks!
Likes For jemaleddin:
Likes For daverup:
#3
New but Nice
Thread Starter
Likes For daverup:
#5
New but Nice
Thread Starter
I think that’s ideal - it looks like they’ve stopped making the Minoura, but it’s still on Amazon. They say only for 22.2mm handlebars though, and I think my Nitto Olimpiade B115 is 25.4. That seems like a really small difference, but I’m not sure it’s fit. Will look for similar!
#6
Senior Member
Join Date: Oct 2017
Posts: 2,046
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 838 Post(s)
Liked 1,082 Times
in
522 Posts
This thread may be of use to you: https://m.bikeforums.net/showthread....ing=1&t=227038
Likes For polymorphself:
#7
Shifting is fun!
Join Date: Aug 2009
Location: South Holland, NL
Posts: 11,007
Bikes: Yes, please.
Mentioned: 280 Post(s)
Tagged: 0 Thread(s)
Quoted: 2198 Post(s)
Liked 4,613 Times
in
1,765 Posts
Just a few ideas, courtesy of mrs non-fixie.
A CatEye reflector mount used for a bottle cage. Not the most robust solution. This one broke on the Belgian cobble stones a year later:
This frame has braze-ons, but simple (and classic) clamps will work just as well:
Zéfal makes nice large bottles that'll fit:
A CatEye reflector mount used for a bottle cage. Not the most robust solution. This one broke on the Belgian cobble stones a year later:
This frame has braze-ons, but simple (and classic) clamps will work just as well:
Zéfal makes nice large bottles that'll fit:
Likes For non-fixie:
#8
Senior Member
Join Date: Jun 2019
Location: Michigan USA
Posts: 887
Bikes: A bunch of old bikes.
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 278 Post(s)
Liked 874 Times
in
418 Posts
I think that’s ideal - it looks like they’ve stopped making the Minoura, but it’s still on Amazon. They say only for 22.2mm handlebars though, and I think my Nitto Olimpiade B115 is 25.4. That seems like a really small difference, but I’m not sure it’s fit. Will look for similar!
Likes For daverup:
#9
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,059
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4513 Post(s)
Liked 6,389 Times
in
3,674 Posts
As mentioned in another thread, I got this 1981 Fuji S12-S mixte from a local bike builder who built it up from a frame hanging in his barn. I don't intend it as a daily shopping/exercise/etc. bike, but more of a good weather/parade bike.
But still: I will want emergency supplies/tools and some water when I ride.
The frame doesn't have braze-ons in the front triangle, so I'm not sure where to hold a water bottle. I would consider a triathlon-style seat-post bottle cage, but the seat-post is probably the best bet for storage of tubes and patches and whatnot. I'd swap that for a handlebar bag, but between the cables and the safety levers (which I'm keeping, I know, I know), there isn't really room. Similarly, a stem-mounted bottle holder really won't work with the shifters.
Am I condemned to just wear a jersey and stick a bottle in a pocket? Or are their solutions I'm not considering? Happy to look into any recommendations, especially things that are Fuji/80s appropriate!
Thanks!
But still: I will want emergency supplies/tools and some water when I ride.
The frame doesn't have braze-ons in the front triangle, so I'm not sure where to hold a water bottle. I would consider a triathlon-style seat-post bottle cage, but the seat-post is probably the best bet for storage of tubes and patches and whatnot. I'd swap that for a handlebar bag, but between the cables and the safety levers (which I'm keeping, I know, I know), there isn't really room. Similarly, a stem-mounted bottle holder really won't work with the shifters.
Am I condemned to just wear a jersey and stick a bottle in a pocket? Or are their solutions I'm not considering? Happy to look into any recommendations, especially things that are Fuji/80s appropriate!
Thanks!
I like to carry too much stuff and often need to carry more.
Likes For merziac:
#10
Full Member
Join Date: Jun 2022
Location: San Diego, California USA
Posts: 353
Bikes: 1974 Masi GC, 1982 Trek 728 (aka 720), 1992 Trek Multitrack 750
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 122 Post(s)
Liked 222 Times
in
140 Posts
Loverly mixte, très kool, love it, I've always wanted a nice one in my size (me, 6 foot).
(please do not listen to me concerning the following statement. Stay away from the rabbit hole )
It does look like the clearances are a little tight in its current setup but I always thought those bicycles looked extra cool with fenders.
It would add a certain "je ne sais quoi", as the kids are saying nowadays.
(not that it doesn't already have a cetain "je ne sais quoi")
Plus it helps keep you and the drive-train cleaner.
It looks like those might be 27 inch wheels and going to 700c will probably give you the room needed.
Still, very neat.
Love it just the way it is.
Hello, my name is Larry, and I have a bicycle problem.
(please do not listen to me concerning the following statement. Stay away from the rabbit hole )
It does look like the clearances are a little tight in its current setup but I always thought those bicycles looked extra cool with fenders.
It would add a certain "je ne sais quoi", as the kids are saying nowadays.
(not that it doesn't already have a cetain "je ne sais quoi")
Plus it helps keep you and the drive-train cleaner.
It looks like those might be 27 inch wheels and going to 700c will probably give you the room needed.
Still, very neat.
Love it just the way it is.
Hello, my name is Larry, and I have a bicycle problem.
Likes For HelpSingularity:
#11
New but Nice
Thread Starter
Hey, thanks to everyone for the suggestions! I’m going through them all and trying to see what will fit.
I like the idea of clamping something onto the down tube, but both the derailleur cables run down the sides and I haven’t seen anything thin enough to seem like it will work?
I’m seriously thinking about the BH-60, but I don’t have much hardware to try to fiddle with it.
Anyway:
A: Thanks! I love everything about how it looks - and rides! Just gotta sort out storage and get it back to being the 18-speed it was born to be, instead of the 10-speed it is now.
B: I’m also 6’ tall, and this 22.5" mixte fits me great! I do have shortish legs and very long arms, so I think I’m just lucky.
C: The first thing I started googling for after I agreed to buy it (and while it was still just a frame), was shiny fenders. My wife talked me down from hammered ones and suggested beveled ones… But the Dia-Compe center-pull brakes are close now and don’t seem to have any way to adjust their distance from the rims except maybe making an extension bracket thing? Right now the lovely CatEye reflector brackets are super close to the tire, and I wouldn’t want to lose those for the fenders? I think it might be possible, but I’m not enough of a mechanic to be sure. Will have to ask the folks at that co-op next time I’m there. But thanks for encouraging me!
I like the idea of clamping something onto the down tube, but both the derailleur cables run down the sides and I haven’t seen anything thin enough to seem like it will work?
I’m seriously thinking about the BH-60, but I don’t have much hardware to try to fiddle with it.
Anyway:
Loverly mixte, très kool, love it, I've always wanted a nice one in my size (me, 6 foot).
(please do not listen to me concerning the following statement. Stay away from the rabbit hole )
It does look like the clearances are a little tight in its current setup but I always thought those bicycles looked extra cool with fenders.
It would add a certain "je ne sais quoi", as the kids are saying nowadays.
(not that it doesn't already have a cetain "je ne sais quoi")
Plus it helps keep you and the drive-train cleaner.
It looks like those might be 27 inch wheels and going to 700c will probably give you the room needed.
(please do not listen to me concerning the following statement. Stay away from the rabbit hole )
It does look like the clearances are a little tight in its current setup but I always thought those bicycles looked extra cool with fenders.
It would add a certain "je ne sais quoi", as the kids are saying nowadays.
(not that it doesn't already have a cetain "je ne sais quoi")
Plus it helps keep you and the drive-train cleaner.
It looks like those might be 27 inch wheels and going to 700c will probably give you the room needed.
B: I’m also 6’ tall, and this 22.5" mixte fits me great! I do have shortish legs and very long arms, so I think I’m just lucky.
C: The first thing I started googling for after I agreed to buy it (and while it was still just a frame), was shiny fenders. My wife talked me down from hammered ones and suggested beveled ones… But the Dia-Compe center-pull brakes are close now and don’t seem to have any way to adjust their distance from the rims except maybe making an extension bracket thing? Right now the lovely CatEye reflector brackets are super close to the tire, and I wouldn’t want to lose those for the fenders? I think it might be possible, but I’m not enough of a mechanic to be sure. Will have to ask the folks at that co-op next time I’m there. But thanks for encouraging me!
#12
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,869
Bikes: Too many to list here check my signature.
Mentioned: 194 Post(s)
Tagged: 2 Thread(s)
Quoted: 2937 Post(s)
Liked 2,934 Times
in
1,497 Posts
I know I'm late to the party but here's my 2 Rubles. You don't need a bag unless you're planning to carry something, then the bag only needs to carry what you absolutely need. I keep a small tool roll with had wipes and meds, that I put on a jersey pocket so, on my clincher wheel bikes I only need a small bag for tube and levers (and sometimes a CO2 charger. There are lots of options for a bottle and if it fits I recomend on the DT and running the pump along the ST or even the seat stay. A handle bar bag would be useful for both picking up the odd snack or something as well as an extra bottle for longer rides.
Not the best pic but the pump fits nicely in the old school along the seat stay arrangement. I'm not sure they make a smaller seat bag
This old Cannondale bag doesn't fit quite right with this Hybrid stype stem but it's very useful for errands
Not the best pic but the pump fits nicely in the old school along the seat stay arrangement. I'm not sure they make a smaller seat bag
This old Cannondale bag doesn't fit quite right with this Hybrid stype stem but it's very useful for errands
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
Likes For Bianchigirll:
#13
Bad example
Join Date: Nov 2015
Location: Seattle and Reims
Posts: 3,074
Bikes: Peugeot: AO-8 1973, PA-10 1971, PR-10 1973, Sante 1988; Masi Gran Criterium 1975, Stevenson Tourer 1980, Stevenson Criterium 1981, Schwinn Paramount 1972, Rodriguez 2006, Gitane Federal ~1975, Holdsworth Pro, Follis 172 ~1973, Bianchi '62
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 828 Post(s)
Liked 214 Times
in
97 Posts
Hey, thanks to everyone for the suggestions! I’m going through them all and trying to see what will fit.
I like the idea of clamping something onto the down tube, but both the derailleur cables run down the sides and I haven’t seen anything thin enough to seem like it will work?
I like the idea of clamping something onto the down tube, but both the derailleur cables run down the sides and I haven’t seen anything thin enough to seem like it will work?
C: The first thing I started googling for after I agreed to buy it (and while it was still just a frame), was shiny fenders. My wife talked me down from hammered ones and suggested beveled ones… But the Dia-Compe center-pull brakes are close now and don’t seem to have any way to adjust their distance from the rims except maybe making an extension bracket thing? Right now the lovely CatEye reflector brackets are super close to the tire, and I wouldn’t want to lose those for the fenders? I think it might be possible, but I’m not enough of a mechanic to be sure. Will have to ask the folks at that co-op next time I’m there. But thanks for encouraging me!
__________________
Keeping Seattle’s bike shops in business since 1978
Keeping Seattle’s bike shops in business since 1978
Likes For Aubergine:
#14
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,800
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1393 Post(s)
Liked 1,329 Times
in
837 Posts
Another vote for Minoura handlebar mounts for water bottles. Very appropriate for older bicycles, and avoids paint damage or displacement of pumps.(Initial post-repaint rebuild shown. Yes, I did shorten the brake cables.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
Likes For John E:
#15
Bad example
Join Date: Nov 2015
Location: Seattle and Reims
Posts: 3,074
Bikes: Peugeot: AO-8 1973, PA-10 1971, PR-10 1973, Sante 1988; Masi Gran Criterium 1975, Stevenson Tourer 1980, Stevenson Criterium 1981, Schwinn Paramount 1972, Rodriguez 2006, Gitane Federal ~1975, Holdsworth Pro, Follis 172 ~1973, Bianchi '62
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 828 Post(s)
Liked 214 Times
in
97 Posts
Off topic, but your Capo is gorgeous, John.
__________________
Keeping Seattle’s bike shops in business since 1978
Keeping Seattle’s bike shops in business since 1978
Likes For Aubergine:
#16
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,869
Bikes: Too many to list here check my signature.
Mentioned: 194 Post(s)
Tagged: 2 Thread(s)
Quoted: 2937 Post(s)
Liked 2,934 Times
in
1,497 Posts
Those Velo Orange are a very classic and oddly probably the best option. Most anything else seems pretty fat. which means a trial and error fit for cable rub.
This looks interesting https://spinwarriors.com/products/ri...e-adapter-gold
This looks interesting https://spinwarriors.com/products/ri...e-adapter-gold
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
Last edited by Bianchigirll; 03-30-24 at 10:10 AM.
Likes For Bianchigirll:
#17
Shifting is fun!
Join Date: Aug 2009
Location: South Holland, NL
Posts: 11,007
Bikes: Yes, please.
Mentioned: 280 Post(s)
Tagged: 0 Thread(s)
Quoted: 2198 Post(s)
Liked 4,613 Times
in
1,765 Posts
Likes For non-fixie:
#18
ambulatory senior
Join Date: Dec 2016
Location: Peoria Il
Posts: 5,998
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1956 Post(s)
Liked 3,662 Times
in
1,680 Posts
https://velo-orange.com/products/hin...le-cage-clamps
These work for me. I may have had the occasional cable rub but the bikes shift beautifully.
These work for me. I may have had the occasional cable rub but the bikes shift beautifully.
Likes For 52telecaster:
#19
New but Nice
Thread Starter
Hey all - I’ve ordered those skinny clamps that Aubergine recommends (thanks!). Hilariously, they don’t work with any of the bottle cages that Velo Orange sells, but I think the very basic REI ones do. Also, I will be trying to find a saddle bag that I like. I’m leaning towards something brown, maybe leather? Handlebar bags won’t work with the brake arrangement, and I don’t need much more than a repair kit.
Velo Orange also sells fenders they say work with 27" wheels, so I may be investigating those in the future. 😀
This has been really helpful - thanks very much to you all!
Velo Orange also sells fenders they say work with 27" wheels, so I may be investigating those in the future. 😀
This has been really helpful - thanks very much to you all!
Likes For icemilkcoffee:
#21
New but Nice
Thread Starter
Likes For jemaleddin:
#22
Shifting is fun!
Join Date: Aug 2009
Location: South Holland, NL
Posts: 11,007
Bikes: Yes, please.
Mentioned: 280 Post(s)
Tagged: 0 Thread(s)
Quoted: 2198 Post(s)
Liked 4,613 Times
in
1,765 Posts
And bags can be found that clip onto those small racks and won't interfere with your brake levers:
Another option is a bag support such as this one:
Likes For non-fixie:
#23
New but Nice
Thread Starter
That is BEAUTIFUL. So much so that I immediately started reverse image searching to try to figure out where to get a bag like that... with no luck. That bag alone looks like it's worth getting the rack!
#24
Bad example
Join Date: Nov 2015
Location: Seattle and Reims
Posts: 3,074
Bikes: Peugeot: AO-8 1973, PA-10 1971, PR-10 1973, Sante 1988; Masi Gran Criterium 1975, Stevenson Tourer 1980, Stevenson Criterium 1981, Schwinn Paramount 1972, Rodriguez 2006, Gitane Federal ~1975, Holdsworth Pro, Follis 172 ~1973, Bianchi '62
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 828 Post(s)
Liked 214 Times
in
97 Posts
That is BEAUTIFUL. So much so that I immediately started reverse image searching to try to figure out where to get a bag like that... with no luck. That bag alone looks like it's worth getting the rack!
__________________
Keeping Seattle’s bike shops in business since 1978
Keeping Seattle’s bike shops in business since 1978
Likes For Aubergine:
#25
Shifting is fun!
Join Date: Aug 2009
Location: South Holland, NL
Posts: 11,007
Bikes: Yes, please.
Mentioned: 280 Post(s)
Tagged: 0 Thread(s)
Quoted: 2198 Post(s)
Liked 4,613 Times
in
1,765 Posts
Likes For non-fixie: