I have some Campy non aero brake levers with gum hoods in perfect condition. They are Nuovo Gran Sport I think. They are in exprodinary condition. I would like to trade them for a set of Campy aero levers in good shape.

for trade:

55cm 70 Raleigh International, profesionally repainted. frame/forks/ofmega headset only.
55cm 74 gitane interclube, frame/forks/headset/bb only

trade for 58cm italian frame of the same... campy dropouts etc... col tubbing....

hmm. i also have a gios torino profesonalo with campy. the size is a 57.

besides the other items

need simplex derailleur for a px10 and rims

uh. I don't understand...you want to trade your gios for something? I can't find the other items that you refer to...

Check Italianbiker's first post in this thread....page 1, I believe. Had some wheelsets to offer.

Rather desperately looking for one Raleigh Sports rear fender in Raleigh's brown-metallic "Coffee" color with white tail. Must be in nice shape. If it has the large-diameter Sturmey-Archer reflector, all the better!

Have tons of junk to trade, some old VLW parts, couple of Raleigh parts and a bit of balloon-tyre stuff. My pile of parts is not very complete, I'm afraid, so trying to list what I have would be a difficult task.

If you have the fender, let me know what you're looking for, and with luck, I might have it in my pile of parts, or I may be able to find it in the LBS backshop.

You can email me at cudak888@aol.com

Take care,

-Kurt

Does anyone have some 8-speed dura ace downtube shifters for trade? I have a lot of junk here that you could swap for...

Hey Luker. Check your PM...

'Rasher

Have:

- NOS Suntour Cyclone short cage rear derailleur (with original box, c. early 80s)
- NOS Suntour XC Pro BB-XP00E - Bottom Bracket with "Grease Guard," 125 mm (with original box and instructions, c. 1990)

Looking for:

-Some nice aero brake levers, even very modern ones.

Trading:

- 100mm quill stem, 25.4 clamp, alum could use some polishing but otherwise in good shape
- Shimano 600 (FD-6207) Front Derailleur - clamp could use a bit of polish but otherwise in good shape
- Shimano 400 rear derailleur
- Sugino No. 6 52/42 double crank 170mm arms with ring guard

Need:

- saddle, low rail to seat rise height, other than that open to what you have.
- anything I can't live without.

Looking for a decent alloy mtb triple crankset, make unimportant, as long as it is in useable condition. Would prefer one with removeable chainrings.

Can swap Nishiki double crank set, center pull brake calipers, Suntour derailluers, "what-have-you". Send me your wants.

Need: 1) Shiamno 105 triple crank in black, 2) threadless carbon fork with long steer tube, 3) 240mm threaded 700c fork 4) Nitto Technomic stem

Trade: Miyata 1400 frameset and fork in 56cm

Looking for a Suntour GPX rear brake and a Sturmey Archer AW three-speed hub with cables/shifter. I've got some old wheelsets (some very nice), a Suntour GPX 175 mm crankset, some old Cinelli bars and quill stem (long, not sure of measurement but probably about 10 cm), a 3TTT black quill stem with Bertoni pantograph, some Cobalto brake parts, C-Record front derailleur in usable shape and rear derailleur in nearly usable, and a bunch of other ****.

I am looking for a 54-56cm frame and fork for a fixie conversion. Ideally something mid to late 80's but will consider most anything. Have lots of stuff to trade, let me know if you have anything.

Also still in need of the aero levers described in my earlier post

WANTED:

26.6 seatpost, around 300mm + in length

Have lots of misc. parts to trade, let me know what you have and what you want.

Wanted: 59-60cm vintage lugged road or track frame for fixed gear project. Up for trade: complete 58.5cm Italvega nuovo sport pictured here:

I've got a 9cm Nitto Technomic Forged stem (the extremely tall variety) for a 1" threaded steerer; I need a 9cm stem to fit a 1" threadless steerer and 31.8mm oversized bars.

I've also got a steek Trek MTB fork with canti braze-ons, if anyone needs one.

I have a pair of Phil Wood bottom bracket rings in Italian threading (used but in excellent shape) that I'd like to trade for Phil BB rings in French threading. Thanks.

Have: 1978 Raleigh Super Grand Prix 55 cm, needs new chain, cables and housing, tires

Lookin' for: Similar quality bike, 62 or 63 cm in similar or better condition.

I can get you a NOS Technomic stem in a variety of clamps and lengths. PM me and let me know... I might not get back to you for a week thoughif you do PM me.

Want: Black Bluemels Popular 27" plastic mudguards

Have: Too much **** in my storage bins. You tell me what you're looking for, and I'll see if I have it!

-Kurt

Hi, I need a 90mm stem.

Please elaborate, Quill or Threadless. What is the bar diameter?
What do you have for trade?
I may be able to help.

Wanted:

#1: Sturmey-Archer FW 4 speed. Complete hub, or just the internals. Might be interested in a damaged one too, as I have a few odds-and-ends for the FW.

#2: Sturmey-Archer AW or S5-2 aluminum alloy hub shell. No internals - the FW workings will be installed in this shell.

#3: A pair of Weinmann 27X1-1/4" alloy rims. Must have hooked bead. Prefer the simple box-type rim pattern.

For Trade:

Too much junk to list, not to menton the stuff I can get from the local shops as well. Tell me what you are looking for, and I'll see if I have it (or can get it).

Take care,

-Kurt

Lookin' for a mtb crank set - preferably alloy, doesn't have to be pretty but needs to be functional. I've got a bent steel one on my Gary Fisher Mamba commuter that needs replacing.

I have various center pull vintage brake calipers, a Nishiki crank set, and various mid-lower level Suntour derailluers for trade. I have Suntour 7 & 7GT, Hero, and Spirit derailluer sets, as well as Shimano 60 and 600 FD's as well as Suntour ARX, and Accushift RD's.

Let me know!!