Pay it forward...
10-14-14 | 08:30 AM
#1127
The Improbable Bulk
Joined: Jul 2005
Posts: 8,379
Likes: 7
From: Wilkes-Barre, PA
Bikes: Many
I seem to recall seeing someone mentioning the desire to have an odometer with dual mileage capability. Since I can't find that message after a couple of searches, I will offer it here.
As I was cleaning my garage yesterday, I noticed a wheel that has an Avocet odometer attached with dual mileage. I am assuming it is calibrated in miles since it is in the US, but I didn't really look.
I will post a picture later if needed, but it is one of the units that hooks to the front axle, and uses a pulley to advance the odometer instead of the peg that clicks against the star shaped appendage to move the mileage.
I didn't check, and I don't know if Avocet had different models, but I believe it is currently on a 27" rim.
Free for the cost of shipping, and possible advice for safely removing it in case there is a trick to it (again, I didn't really look at it, so I realize it could be simple).
As I was cleaning my garage yesterday, I noticed a wheel that has an Avocet odometer attached with dual mileage. I am assuming it is calibrated in miles since it is in the US, but I didn't really look.
I will post a picture later if needed, but it is one of the units that hooks to the front axle, and uses a pulley to advance the odometer instead of the peg that clicks against the star shaped appendage to move the mileage.
I didn't check, and I don't know if Avocet had different models, but I believe it is currently on a 27" rim.
Free for the cost of shipping, and possible advice for safely removing it in case there is a trick to it (again, I didn't really look at it, so I realize it could be simple).
__________________
Slow Ride Cyclists of NEPA
People do not seem to realize that their opinion of the world is also a confession of character.
- Ralph Waldo Emerson
Slow Ride Cyclists of NEPA
People do not seem to realize that their opinion of the world is also a confession of character.
- Ralph Waldo Emerson
10-14-14 | 08:40 AM
#1128
Senior Member
Joined: Oct 2007
Posts: 635
Likes: 2
From: Washington, DC
Bikes: CAAD10 5, Trek 1000 Alpha Series
I know this was from a while ago but if you still have the 42cm bars I'll take them if you still have 'em
Free for shipping. Please pay paypal fees, either via gift or add the same percentage amount to shipping.
Four dork disks, one kickstand, and three sets of handlebars.
I won't split the handlebars or the dork disks because it costs the same to ship either. Save on shipping and take everything.
Handlebars:
Hsin-Lung, Al-alloy, 42cm center-to-center across drops. 25.4 mm clamp diameter (measures 25.2 on my calipers)
Winpista, Al-alloy, 41cm center-to-center across drops. 25.4 mm clamp diameter (measures 25.4 on my calipers)
No Logo, steel, 41cm center-to-center across drops. 25.4 mm clamp diameter (measures 25.2 on my calipers)
Four dork disks, one kickstand, and three sets of handlebars.
I won't split the handlebars or the dork disks because it costs the same to ship either. Save on shipping and take everything.
Handlebars:
Hsin-Lung, Al-alloy, 42cm center-to-center across drops. 25.4 mm clamp diameter (measures 25.2 on my calipers)
Winpista, Al-alloy, 41cm center-to-center across drops. 25.4 mm clamp diameter (measures 25.4 on my calipers)
No Logo, steel, 41cm center-to-center across drops. 25.4 mm clamp diameter (measures 25.2 on my calipers)
10-14-14 | 08:53 AM
#1129
Senior Member
Joined: Jun 2011
Posts: 2,219
Likes: 104
From: New York, NY
Bikes: Black Mountain Cycles Road and canti MX, Cannondale CAAD12, Bob Jackson Vigorelli
10-23-14 | 02:18 PM
#1130
Senior Member
Joined: Nov 2011
Posts: 7,951
Likes: 688
From: Port Angeles, WA
Bikes: A green one, "Ragleigh," or something.
Here's an odd one - anyone want a bunch of old plain white sheets? I've got a couple of boxes of them, all slightly-to-god-awful stained. They tend to pile up in the hotel biz.
Perhaps you need dust covers for bikes you have in storage, drop cloths for wrenching on bikes indoors during the winter months, or maybe you just want to treat the whole neighborhood to mummy costumes this Hallowe'en?
PM with how many you want, and I'll PM back the postage it takes to ship em to you. Also have many pillowcases in same condition.
Perhaps you need dust covers for bikes you have in storage, drop cloths for wrenching on bikes indoors during the winter months, or maybe you just want to treat the whole neighborhood to mummy costumes this Hallowe'en?
PM with how many you want, and I'll PM back the postage it takes to ship em to you. Also have many pillowcases in same condition.
__________________
● 1971 Grandis SL ● 1972 Lambert Grand Prix frankenbike ● 1972 Raleigh Super Course fixie ● 1973 Nishiki Semi-Pro ● 1979 Motobecane Grand Jubile ●1980 Apollo "Legnano" ● 1984 Peugeot Vagabond ● 1985 Shogun Prairie Breaker ● 1986 Merckx Super Corsa ● 1987 Schwinn Tempo ● 1988 Schwinn Voyageur ● 1989 Bottechia Team ADR replica ● 1990 Cannondale ST600 ● 1993 Technium RT600 ● 1996 Kona Lava Dome ●
● 1971 Grandis SL ● 1972 Lambert Grand Prix frankenbike ● 1972 Raleigh Super Course fixie ● 1973 Nishiki Semi-Pro ● 1979 Motobecane Grand Jubile ●1980 Apollo "Legnano" ● 1984 Peugeot Vagabond ● 1985 Shogun Prairie Breaker ● 1986 Merckx Super Corsa ● 1987 Schwinn Tempo ● 1988 Schwinn Voyageur ● 1989 Bottechia Team ADR replica ● 1990 Cannondale ST600 ● 1993 Technium RT600 ● 1996 Kona Lava Dome ●
10-26-14 | 09:20 PM
#1131
Fans of all thing French, here's a free (for the cost of shipping and am pretty sure i can coax it into a flat-rate box so $5.35 to any USA address):
Helicomatic rear hub with freewheel (or call it a cassette if you like).
The hub is 36-hole and 126mm spaced, the FW is 6-SP, 14-32, both are dirty but I squirted WD40 in both and they rotate freely...the hub is missing one of the plastic dust shields, maybe a DIYer can just cut a donut of plastic from a plastic lid and snap it in.
Don't miss this chance to add a much-maligned French product to your collection! FREEDOM hubs!
Helicomatic rear hub with freewheel (or call it a cassette if you like).
The hub is 36-hole and 126mm spaced, the FW is 6-SP, 14-32, both are dirty but I squirted WD40 in both and they rotate freely...the hub is missing one of the plastic dust shields, maybe a DIYer can just cut a donut of plastic from a plastic lid and snap it in.
Don't miss this chance to add a much-maligned French product to your collection! FREEDOM hubs!
10-26-14 | 11:29 PM
#1132
Senior Member
Joined: Nov 2011
Posts: 7,951
Likes: 688
From: Port Angeles, WA
Bikes: A green one, "Ragleigh," or something.
Fans of all thing French, here's a free (for the cost of shipping and am pretty sure i can coax it into a flat-rate box so $5.35 to any USA address):
Helicomatic rear hub with freewheel (or call it a cassette if you like).
The hub is 36-hole and 126mm spaced, the FW is 6-SP, 14-32
Don't miss this chance to add a much-maligned French product to your collection! FREEDOM hubs!
Helicomatic rear hub with freewheel (or call it a cassette if you like).
The hub is 36-hole and 126mm spaced, the FW is 6-SP, 14-32
Don't miss this chance to add a much-maligned French product to your collection! FREEDOM hubs!
__________________
● 1971 Grandis SL ● 1972 Lambert Grand Prix frankenbike ● 1972 Raleigh Super Course fixie ● 1973 Nishiki Semi-Pro ● 1979 Motobecane Grand Jubile ●1980 Apollo "Legnano" ● 1984 Peugeot Vagabond ● 1985 Shogun Prairie Breaker ● 1986 Merckx Super Corsa ● 1987 Schwinn Tempo ● 1988 Schwinn Voyageur ● 1989 Bottechia Team ADR replica ● 1990 Cannondale ST600 ● 1993 Technium RT600 ● 1996 Kona Lava Dome ●
● 1971 Grandis SL ● 1972 Lambert Grand Prix frankenbike ● 1972 Raleigh Super Course fixie ● 1973 Nishiki Semi-Pro ● 1979 Motobecane Grand Jubile ●1980 Apollo "Legnano" ● 1984 Peugeot Vagabond ● 1985 Shogun Prairie Breaker ● 1986 Merckx Super Corsa ● 1987 Schwinn Tempo ● 1988 Schwinn Voyageur ● 1989 Bottechia Team ADR replica ● 1990 Cannondale ST600 ● 1993 Technium RT600 ● 1996 Kona Lava Dome ●
11-21-14 | 08:15 PM
#1135
Senior Member
Joined: Nov 2011
Posts: 7,951
Likes: 688
From: Port Angeles, WA
Bikes: A green one, "Ragleigh," or something.
Crusty old Aero bars, with armrests in better shape. Second photo show the mounting blocks to clamp them down on your existing handlebar. Not included: bolts to mound aerobars on the clamps (but standard hardware store stuff is all it takes.). Clamps look like they fit any bars between 25mm and about 26.5mm diameter
Want to ruin the looks of your go-fast machine and add a couple pounds of dead weight? These babies are yours for the cost of shipping! (Your ZIP code will be needed for that calculation.)
Want to ruin the looks of your go-fast machine and add a couple pounds of dead weight? These babies are yours for the cost of shipping! (Your ZIP code will be needed for that calculation.)
__________________
● 1971 Grandis SL ● 1972 Lambert Grand Prix frankenbike ● 1972 Raleigh Super Course fixie ● 1973 Nishiki Semi-Pro ● 1979 Motobecane Grand Jubile ●1980 Apollo "Legnano" ● 1984 Peugeot Vagabond ● 1985 Shogun Prairie Breaker ● 1986 Merckx Super Corsa ● 1987 Schwinn Tempo ● 1988 Schwinn Voyageur ● 1989 Bottechia Team ADR replica ● 1990 Cannondale ST600 ● 1993 Technium RT600 ● 1996 Kona Lava Dome ●
● 1971 Grandis SL ● 1972 Lambert Grand Prix frankenbike ● 1972 Raleigh Super Course fixie ● 1973 Nishiki Semi-Pro ● 1979 Motobecane Grand Jubile ●1980 Apollo "Legnano" ● 1984 Peugeot Vagabond ● 1985 Shogun Prairie Breaker ● 1986 Merckx Super Corsa ● 1987 Schwinn Tempo ● 1988 Schwinn Voyageur ● 1989 Bottechia Team ADR replica ● 1990 Cannondale ST600 ● 1993 Technium RT600 ● 1996 Kona Lava Dome ●
Last edited by Lascauxcaveman; 11-21-14 at 08:19 PM.
12-13-14 | 06:58 AM
#1138
Senior Member
Joined: Jun 2011
Posts: 1,406
Likes: 105
From: Dayton, Ohio
Bikes: Trek 720, Trek 620, Trek 520, Steel Schwinns, AD Puch, Kona, Nishiki Pro, All City Disc Spacehorse, Waterford
I have frame only, no fork, Iron Horse Victory frame - nice 853 steel, somewhere around 59 cm - and didn't look like crash damage on the steerer tube - in the Checker Cab, yellow and black pattern that someone could pick up in Dayton Ohio or have for the shipping. Merry Christmas all!
I bought it to build as a spare to my Kona Kapu - but later came into a Waterford Paramount.
I will never build and ride this bike. I would love for it to go to a good home. I think it is pretty cool looking.
I bought it to build as a spare to my Kona Kapu - but later came into a Waterford Paramount.
I will never build and ride this bike. I would love for it to go to a good home. I think it is pretty cool looking.
12-13-14 | 08:00 AM
#1139
Senior Member
Joined: Aug 2010
Posts: 3,189
Likes: 61
From: The Thumb, MI
Non aero road levers. Pair of Mafac levers with no hoods but have white(more of a cream color now) lever hoods. One is missing the clamp and nut. The other is complete.
Also have a single Mafac lever with a decent black hood and barrel adjuster. No clamp/nut.
Then a pair of Universal levers in decent shape without hoods and a clamp for one of the levers. These match up with the Universal Mod 77 calipers I believe.
This is a take all kind of deal. I may even have some decent barely used brake cables I can toss it. No promises though.
Pay for shipping and all of your non aero brake lever dreams will come true...after finding some mounting clamps.
Also have a single Mafac lever with a decent black hood and barrel adjuster. No clamp/nut.
Then a pair of Universal levers in decent shape without hoods and a clamp for one of the levers. These match up with the Universal Mod 77 calipers I believe.
This is a take all kind of deal. I may even have some decent barely used brake cables I can toss it. No promises though.
Pay for shipping and all of your non aero brake lever dreams will come true...after finding some mounting clamps.
12-13-14 | 01:34 PM
#1141
Moving this RH-only SunTour Alpha3000 shift lever (DT braze-on, 6S SUNTOUR ONLY indexing or "universal friction") in good condition, from trade section to here:
Free for the cost of shipping, should be about $4 or less in a padded envelope to your USA address (will vary for overseas/Canada addresses)
Free for the cost of shipping, should be about $4 or less in a padded envelope to your USA address (will vary for overseas/Canada addresses)
01-14-15 | 12:26 PM
#1142
1, 2, 3 and to the 4X
Joined: Feb 2008
Posts: 425
Likes: 34
From: Ashland, OR
(1) Shimano bottom bracket derailleur cable guide
(3) Shimano downtube derailleur cable guides
PM me your address. I'll cover shipping.
Claimed
(3) Shimano downtube derailleur cable guides
PM me your address. I'll cover shipping.
Claimed
Last edited by Wheels Of Steel; 01-14-15 at 12:41 PM.
01-22-15 | 04:40 PM
#1144
Tyrannosaurus Rexitis
Joined: Mar 2011
Posts: 934
Likes: 0
From: Cape Cod, MA
Bikes: Scott Addict 6870
Free stuff!
I have a more modern trek MTb and vintage 27" wheel schwinn road bike. In various states of disrepair. Maybe some
more random stuff. These aren't anything valuable so don't expect to flip them!
come to Cape Cod MA and take them off my hands!
I have a more modern trek MTb and vintage 27" wheel schwinn road bike. In various states of disrepair. Maybe some
more random stuff. These aren't anything valuable so don't expect to flip them!
come to Cape Cod MA and take them off my hands!
03-26-15 | 05:50 AM
#1145
aka: Dr. Cannondale
Joined: Jul 2009
Posts: 8,658
Likes: 6,295
Have three sets of Modolo Ergo/Anatomic handlebars in decent shape, all are 26 clamp and 40 width. One shiny, one polished in center section, one dull anodized.
Yours for the cost of postage, figure $15 for one, $20 for all three.
Yours for the cost of postage, figure $15 for one, $20 for all three.
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
03-27-15 | 08:47 AM
#1146
Bikes are okay, I guess.
Joined: Jan 2015
Posts: 8,006
Likes: 3,773
From: Richmond, Virginia
Bikes: Waterford Paramount Touring, Raleigh Sports 3-speeds in M23 & L23, Schwinn Cimarron oddball build, Marin Palisades Trail dropbar conversion, Nishiki Cresta GT, Jeunet mixte
Crusty old Aero bars, with armrests in better shape. Second photo show the mounting blocks to clamp them down on your existing handlebar. Not included: bolts to mound aerobars on the clamps (but standard hardware store stuff is all it takes.). Clamps look like they fit any bars between 25mm and about 26.5mm diameter
Want to ruin the looks of your go-fast machine and add a couple pounds of dead weight? These babies are yours for the cost of shipping! (Your ZIP code will be needed for that calculation.)
Want to ruin the looks of your go-fast machine and add a couple pounds of dead weight? These babies are yours for the cost of shipping! (Your ZIP code will be needed for that calculation.)
03-29-15 | 03:48 PM
#1147
4.6692016090
Joined: May 2007
Posts: 1,480
Likes: 82
From: Monterey Peninsula, California
Bikes: yes
Pay It Forward 2015
A few items for the price of shipping. All items shipped from 93950; package dimensions and weight given below for each item to get exact cost of shipping or send $3.00 per item. PayPal; Shipped USPS 1st Class.
Shimano PD-7410 Cleat Pontoons, 1 Pair
Fits PD-7410 & PD-6500 SPD
(will get pkg size in a bit)
CyclePro inner tube 27x1
pkg = 8"x8" 5oz
Art's Cyclery Tee-shirt
Special edition Tour of California colorway, 100% preshrunk cotton. Size Medium. 1 available.
pkg = 7"x9" 6oz
Gone...
Darwin Brake Levers
pkg = 7"x9" 10oz
Late 80's Lambswool saddle cover
Inside dimensions L 10" x W 7" at rear, W 1.5" at front
pkg = 14" x 11" 7oz
Shimano PD-7410 Cleat Pontoons, 1 Pair
Fits PD-7410 & PD-6500 SPD
(will get pkg size in a bit)
CyclePro inner tube 27x1
pkg = 8"x8" 5oz
Art's Cyclery Tee-shirt
Special edition Tour of California colorway, 100% preshrunk cotton. Size Medium. 1 available.
pkg = 7"x9" 6oz
Gone...
Darwin Brake Levers
pkg = 7"x9" 10oz
Late 80's Lambswool saddle cover
Inside dimensions L 10" x W 7" at rear, W 1.5" at front
pkg = 14" x 11" 7oz
Last edited by retrofit; 03-31-15 at 12:47 PM. Reason: update status
03-29-15 | 04:25 PM
#1150
Senior Member
Joined: Mar 2013
Posts: 3,830
Likes: 365
From: Maryland
Bikes: Lots of English 3-speeds, a couple of old road bikes, 3 mountain bikes, 1 hybrid, and a couple of mash-ups
I have several Pyramid thorn resistant tubes in various sizes. They are heavy - as heavy as many of my tires - but they are free. You tell me what size you need, and I will tell you if I have it. I do have several kid-sized tubes, so I would package them into one shipment. They are yours for the cost of shipping.