Campy NR/SR brake and shift cables
#1
Senior Member
Thread Starter
Campy NR/SR brake and shift cables
I tried doing a search but didn't come up with much. I currently have what I think are genuine campy cables on these, but they are starting to wear out (think I got them from bicyleclassics years ago). The derailleur cables measure 1.6mm, but appear to be galvanized? They do have the <c> on the heads.
What do you all recommend to use for these? I will need to replace the shifter cables pretty soon... the brake cables are the black housing (can't remember if they are lined?), and they seem fine.
Jagwire? Clarks? Other?
What do you all recommend to use for these? I will need to replace the shifter cables pretty soon... the brake cables are the black housing (can't remember if they are lined?), and they seem fine.
Jagwire? Clarks? Other?
#2
Senior Member
Join Date: Jul 2009
Posts: 11,128
Bikes: 1986 Alan Record Carbonio, 1985 Vitus Plus Carbone 7, 1984 Peugeot PSV, 1972 Line Seeker, 1986(est.) Medici Aerodynamic (Project), 1985(est.) Peugeot PY10FC
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 150 Post(s)
Likes: 0
Liked 34 Times
in
27 Posts
I just got Clarks derailleur cables for my Alan Carbonio build, and they worked great with my Mavic retrofriction shifters. I suspect they will work as well with Campy NR as the cable end heads should be the same size....
Frankly, I don't think it's worth trying to get NOS cables fro brakes and derailleurs, as the new stuff from makers like Clarks work perfectly, plus IIRC, they are stainless steel, so no rust problems.........plus nobody will know they are brand new anyway.
The new brake cables are also great as they are smoother on the outside compared to the older stuff, so they slide much more smoothly in their casings
Chombi
Frankly, I don't think it's worth trying to get NOS cables fro brakes and derailleurs, as the new stuff from makers like Clarks work perfectly, plus IIRC, they are stainless steel, so no rust problems.........plus nobody will know they are brand new anyway.
The new brake cables are also great as they are smoother on the outside compared to the older stuff, so they slide much more smoothly in their casings
Chombi
#3
Senior Member
Thread Starter
Thanks. Forgot to mention I am using Simplex Retrofriction shifters as well, but the Campy heads fit just fine.
#4
Senior Member
Join Date: Apr 2005
Location: Wherever
Posts: 16,748
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 556 Post(s)
Likes: 0
Liked 132 Times
in
78 Posts
I just use the quality stuff from the LBS for one of my rides. Clarks? Sram? I can't remember. Just get the pretty good ones. And please, don't throw out the old Campy brake cables. They may indeed be wearing out, but someone here might like to have them if they're the old 1.8 mm galvanized jobs.
#5
incazzare.
I just use whatever they have at the LBS. Works fine.
__________________
1964 JRJ (Bob Jackson), 1973 Wes Mason, 1974 Raleigh Gran Sport, 1986 Schwinn High Sierra, 2000ish Colian (Colin Laing), 2011 Dick Chafe, 2013 Velo Orange Pass Hunter
1964 JRJ (Bob Jackson), 1973 Wes Mason, 1974 Raleigh Gran Sport, 1986 Schwinn High Sierra, 2000ish Colian (Colin Laing), 2011 Dick Chafe, 2013 Velo Orange Pass Hunter
#6
Senior Member
Join Date: Jun 2006
Posts: 20,305
Mentioned: 130 Post(s)
Tagged: 0 Thread(s)
Quoted: 3464 Post(s)
Liked 2,829 Times
in
1,995 Posts
They are worn out when they break or are just so rusty that their integrity is compromised.
For bright and shiny, some of the good new stainless stuff is fine. I bought Aztec teflon infused units that show black and work well too.
I always paint the ends an accent color if I don't have authentic Campagnolo cables...
For bright and shiny, some of the good new stainless stuff is fine. I bought Aztec teflon infused units that show black and work well too.
I always paint the ends an accent color if I don't have authentic Campagnolo cables...
Thread
Thread Starter
Forum
Replies
Last Post
tonyprieto28
Bicycle Mechanics
8
05-10-15 03:36 PM