![]() |
I think I like the look of the singlespeed more than I like the function. I would have to gear down a 700cc bike so much to be where I would like it that it might be ridiculous. I had a 26" Redline Monocog and the 36x18 gearing was good for me but I sold it to try and cut down on my bikes. I have 90's hybrid bike that I am going to try a few configurations and one of them might be singlespeed. I also have a singlespeed mountain bike frame I might build up one of these days. Right now I need to get some flips and bikes for friends done before I tackle another personal project.
|
Originally Posted by dmikester1
(Post 12674460)
Why wouldn't this be very good for a triathalon? It's all I've got so I'm going to have to use it either way. I figure some new slicks should some.
Mike It would be like using a 4x4 truck at LeMans. sure, it could drive the route, but not nearly as efficiently as the cars that are designed for speed. Since the bike leg of a triathalon is essentially a "time trial", it is illegal to draft off of another rider. It is you vs. the wind. Every bit of aerodynamic advantage will make a difference. The riding position is low and sleek. The bicycle is devoid of superfluous "stuff" poking out to grab the air. So, sure, putting slicks and an aerobar on the mountainbike would get you around he course, and would perhaps be a good way to see if the triathalon thing is for you, but it would be inherently limited, like driving a jeep at an autocross. With a total re-build of a mountain bike frame, you could create an aerodynamic machine with better gearing, but would more or less require replacing every component. With that, the time and money would be better spent getting a more appropriate racing (or tri-specific) bike for the purpose. |
So, my Vaya got a roommate. I sold my CC frame and found this for sale the same night. Still need to swap out the pedals and stem to drop the bars a bit.
http://www.watsonfx.com/masi.jpg |
Originally Posted by Terry66
(Post 12688276)
So, my Vaya got a roommate. I sold my CC frame and found this for sale the same night. Still need to swap out the pedals and stem to drop the bars a bit.
http://www.watsonfx.com/masi.jpg If you're dropping the bars, another saddle might be a better choice. |
Here's my Globe Vienna 3 Disc. I've added a computer, under seat bag and fenders. I'll be adding a rear rack and pannier next.
http://img.photobucket.com/albums/v4...e/601fb353.jpg http://img.photobucket.com/albums/v4...e/ef69d950.jpg http://img.photobucket.com/albums/v4...e/3e068022.jpg and my custom badge, complete with a Bob Marley quote http://img.photobucket.com/albums/v4...e/384d7903.jpg |
^Wow the front of the front fender looks really close to the tire in the picture. How much room is there?
|
Originally Posted by monsterpile
(Post 12684569)
Everytime I see a singlespeed cross bike I want one.
|
Originally Posted by canyoneagle
(Post 12688314)
Sweet!
If you're dropping the bars, another saddle might be a better choice. Any reason for LOWERING the bars? If anything I'd be raising them. |
Originally Posted by MijnWraak
(Post 12692707)
Any reason for LOWERING the bars? If anything I'd be raising them.
I'd do the same on that bike - maybe 3-4" drop for my body. I'd probably put a mustache bar or shallow drop bar on it, though. |
Originally Posted by kabex
(Post 12634067)
Hello all, this is my commuter:
http://i.imgur.com/iIhT1.jpg It was about $180 new, weighs like 35lbs and uses microshift components (6 speeds) Very simple and low-end but it gets the job done, about 9 miles round-trip every day, no problems after a few months. No idea why the chain snapped, it seemed ok to me. My left big toe is injured but slowly healing, just swollen to hell. :( Oh and yes it's really heavy, they use steel components not even aluminium ones, the frame is probably hi-ten steel of the heaviest variety. Pipe tubing. I don't care, I've loved it so far except for the chain failure, it's fun and extremely cheap. |
Originally Posted by SemperParatus
(Post 12690128)
Here's my Globe Vienna 3 Disc. I've added a computer, under seat bag and fenders. I'll be adding a rear rack and pannier next.
|
Originally Posted by SemperParatus
(Post 12690128)
|
Originally Posted by canyoneagle
(Post 12692865)
My guess is that the bike looks like it has pretty sporty geometry, which lends itself to a more aggressive riding position.
I'd do the same on that bike - maybe 3-4" drop for my body. I'd probably put a mustache bar or shallow drop bar on it, though. |
Originally Posted by beebe
(Post 12694516)
Those pictures are as nice as the bike is. What're you shooting those with?
Canon 40D, Sigma 17-70mm, Canon 430exII flash
Originally Posted by Oil_LOL
(Post 12694662)
Good lord, I've never seen a "Comfort bike" look so badass. :thumb:
|
Originally Posted by edsmemberships
(Post 12690742)
^Wow the front of the front fender looks really close to the tire in the picture. How much room is there?
|
Originally Posted by kabex
(Post 12693048)
bad news, I was sprinting yesterday out of the saddle and the chain snapped and was flown away with huge force, I smashed my foot against the road @ ~20mph and my groin on the top tube, the bike swerved uncontrollably but I managed not to crash.
No idea why the chain snapped, it seemed ok to me. My left big toe is injured but slowly healing, just swollen to hell. :( Oh and yes it's really heavy, they use steel components not even aluminium ones, the frame is probably hi-ten steel of the heaviest variety. Pipe tubing. I don't care, I've loved it so far except for the chain failure, it's fun and extremely cheap. |
Please Sticky This Thread, It uses to be & a lot of other sub-forums have there photo thread stickyed it just makes it easier to find one thread people love to view.
Sorry for being so big. |
My eyes! My eyes!
|
My prudish adherence to something resembling proper spelling and grammar! My prudish adherence to something resembling proper spelling and grammar!
|
Originally Posted by amckimmey
(Post 12698112)
Sorry for being so big. |
Originally Posted by WhyFi
(Post 12698419)
My prudish adherence to something resembling proper spelling and grammar! My prudish adherence to something resembling proper spelling and grammar!
|
|
Just started commuting a week ago. Just once a week until the kids are done with school. Then I'll slowly build up to 2 then 3 days a week. Its a 10 mile commute one way on a mountain bike with semi-slicks
http://img690.imageshack.us/img690/4585/bikevc.jpg Yes, that is my curious cat checking out the bike |
Thats a pretty sweet bike.
|
|
| All times are GMT -6. The time now is 08:47 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.