Snow chains for bike tires??
#1
Snow chains for bike tires??
We've had a bit of the white stuff here in N. Texas today which will turn to smush and freeze overnight.
I'm seriously considering biking in tomorrow just fer grins. My Commuter is a fixed gear bike with 700x25c tires.
Is there anything I can do to temporarily increase traction?? I've thought about putting zip ties around my back tire every inch or so, maybe do the front too and just open up the brake and not use it.
Suggestions??
I'm seriously considering biking in tomorrow just fer grins. My Commuter is a fixed gear bike with 700x25c tires.
Is there anything I can do to temporarily increase traction?? I've thought about putting zip ties around my back tire every inch or so, maybe do the front too and just open up the brake and not use it.
Suggestions??
#3
I'm seriously considering biking in tomorrow just fer grins. My Commuter is a fixed gear bike with 700x25c tires.
Is there anything I can do to temporarily increase traction?? I've thought about putting zip ties around my back tire every inch or so, maybe do the front too and just open up the brake and not use it.
Suggestions??
#4
Very, very Senior Member
Joined: May 2009
Posts: 1,224
Likes: 1
From: Chicago
Bikes: 2012 Surly Troll, 1999 Hardtail MTB
#6
Elitest Murray Owner
Joined: Apr 2006
Posts: 2,657
Likes: 3
Bikes: 1972 Columbia Tourist Expert III, Columbia Roadster
In europe people would wind nylon rope around moped wheels for traction in snow..... I suppose that's work if you have the clearance to do so - of course if you're on any clean areas it'd be bumpy as hell.
#7
Senior Member
Joined: Dec 2006
Posts: 3,693
Likes: 0
I wouldn't sacrifice your front brake for something that may or may not increase traction.
How much clearance in your frame do you have? It seems to me if you have room for some small chains, you have room for 32mm cross tires.
How much clearance in your frame do you have? It seems to me if you have room for some small chains, you have room for 32mm cross tires.
#8
Senior Member
Joined: Apr 2006
Posts: 1,840
Likes: 0
From: San Jose, CA
Bikes: Bianchi San Remo - set up as a utility bike, Peter Mooney Road bike, Peter Mooney commute bike,Dahon Folder,Schwinn Paramount Tandem
I used to live in Maine, and found that commuting on snow/ice wasn't a big deal. The thin tires will tend to cut through snow and find the pavement far better than a car tire will. Just go slow and you should be fine.
#9
Senior Member
Joined: Apr 2006
Posts: 1,306
Likes: 0
From: Aurora, CO
Bikes: CAAD9-1, Windsor Cliff 29er
About the narrowest studded tires out there are the Nokain A10 700x32. I imagine they might be a little narrower than 32 mm, maybe 30. That probably still won't fit your bike though, plus people have complained about their performance. Maybe get a tire with some sort of inverted tread and lower the pressure?
#11
Riding the road to PARADISE...RIP
Joined: May 2008
Posts: 171
Likes: 2
I can't imagine zip ties really doing anything. In any case, your front tire is far more important than the rear. If your rear skids, the bike fishtails and you shift your hips to put it back in line. If your front skids, you go down fast.
Studed tires can made pretty cheaply, but it's probably not worth the trouble for Texas. If it's just snow/slush, you don't need them anyway. Just go slow, and maybe use some nobby tires. If there's actually ice, get some studs or be _very_ careful.
Studed tires can made pretty cheaply, but it's probably not worth the trouble for Texas. If it's just snow/slush, you don't need them anyway. Just go slow, and maybe use some nobby tires. If there's actually ice, get some studs or be _very_ careful.
#12
Senior Member
Joined: Jun 2005
Posts: 410
Likes: 1
From: Calgary, AB
Bikes: Montague Folding/E-Bike, Kuwahara
Anyway, I seriously looked into making tire chains for a while, but eventually concluded that it would not yield the best results for riding on the streets, and would add a lot of rolling resistance. So, I decided to go with studded tires instead. However, I did find a couple of sites that may interest you concerning making chaings:
https://www.mtnbikeriders.com/2007/02...y-tire-chains/
https://web.archive.org/web/200605121...ne/chains.html







